• Structural Engineering and Mechanics
• /
• v.70 no.5
• /
• pp.563-570
• /
• 2019

To analyze the seismic reliability of concrete rectangular liquid storage structures (CRLSSs), assuming that the wall thickness and internal liquid depth of CRLSSs are random variables, calculation models of CRLSSs are established by using the Monte Carlo finite element method (FEM). The principal stresses of the over-ground and buried CRLSSs are calculated under three rare fortification intensities, and the failure probabilities of CRLSSs are obtained. The results show that the seismic reliability increases with the increase of wall thickness, whereas it decreases with the increase of liquid depth. Between the two random factors, the seismic reliability of CRLSSs is more sensitive to the change in wall thickness. Compared with the over-ground CRLSS, the buried CRLSS has better reliability.

• Journal of Applied Reliability
• /
• v.16 no.1
• /
• pp.32-40
• /
• 2016

Purpose: The purpose of this study is to analyze the effect of sampling points on accuracy of storage reliability estimation for one-shot systems by assuming a weibull distribution as a storage reliability distribution. Also propose method for determining of sampling points for increase the accuracy of reliability estimation. Methods: Weibull distribution was divided into three sections for confirming the possible to estimate the parameters of the weibull distribution only some section's sample. Generate quantal response data for failure data. And performed parameter estimation with quantal response data. Results: If reduce sample point interval of 1 section, increase the accuracy of reliability estimation although sampling only section 1. Even reduce total number of sampling point, reducing sampling time interval of the 1 zone improve the accuracy of reliability estimation. Conclusion: Method to increase the accuracy of reliability estimation is increasing number of sampling and the sampling points. But apply this method to One-shot system is difficult because test cost of one-shot system is expensive. So propose method of accuracy of storage reliability estimation of one-shot system by adjustment of the sampling point. And by dividing the section it could reduce the total sampling point.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.267-274
• /
• 2015

It is necessary to both analyze root-cause of non-conformance of effective illumination time to the specification, and estimate the storage lifetime for 81 mm illuminating projectile stockpiled over 10 years. In this paper, aging mechanism of magnesium flare material due to long-term storage was supposed, and two-stage tests, pre-test and main test based on accelerated degradation tests were performed. Field storage environment of moistureproof was set up, and illumination times in the accelerated degradation tests for temperatures 60 and $70^{\circ}C$ were measured. Then, storage reliability of the projectile was estimated through analyzing the measured data and applying distribution-based degradation models to the data. The $B_{10}$ life by which 10 % of a population of the projectiles will have failed at storage temperature of $25^{\circ}C$ was estimated about 7 years.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.381-394
• /
• 2013

Purpose: Nowadays, Mobile Cloud Storage services are used widely. For sustainable use of this service, we need to determine what factors affect satisfaction. Therefore, the purpose of this study is to identify the factors that influence satisfaction. Methods: To analyze factors that influence satisfaction, this study sets the factors into three dimensions such as service quality, perceived risk, and individual characteristics and analyze the causal relationship between influence factors and satisfaction through Structural Equation Model. Results: The results of this study are as follows; among service quality, user interface and reliability influenced satisfaction, but adaptability did not have any influence. Perceived risk of illegal access had a negative influence on satisfaction, while perceived risk of privacy leakage did not have significant influence on satisfaction in perceived risk. At last, self-efficacy had a significant influence on satisfaction. Conclusion: We identified the influence factors that influence satisfaction. Our findings will be necessary for Mobile Cloud Storage service providers to strengthen their service.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.51-58
• /
• 1998

This study is to define the Automated Container Terminal(ACT) and container terminal system. Also, we analyze the present condition of the container terminal system in Pusan port and its automation level by systems approach. And this paper aims at evaluating on the priority of R&D investment until the beginning of the second stage of New Pusan Port Project(2006). In this process we have considered 8 factors (cost, labor, area, time volume, reliability, safety, convenience) to analyze 6 subsystems. The priority order of R&D until target year by sub-systems is as follow : Cargo Handling System〉Transfer System〉Port Entry System〉Storage System(Distribution&Manufacturing System included)〉Inland Transport System〉Port Information System.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1072-1079
• /
• 2014

This paper introduces a coordinated droop control for the stand-alone DC micro-grid, which is composed of photo-voltaic generator, wind power generator, engine generator, and battery storage with SOC (state of charge) management system. The operation of stand-alone DC micro-grid with the coordinated droop control was analyzed with computer simulation. Based on simulation results, a hardware simulator was built and tested to analyze the performance of proposed system. The developed simulation model and hardware simulator can be utilized to design the actual stand-alone DC micro-grid and to analyze its performance. The coordinated droop control can improve the reliability and efficiency of the stand-alone DC micro-grid.

• Journal of the military operations research society of Korea
• /
• v.37 no.1
• /
• pp.71-85
• /
• 2011

The most important factors of Electronic approval system of battle management system are availability and reliability. Therefore, the electronic approval system uses a SAN(storage area network) to construct the reliable server and storage. In this paper, we analyze the security vulnerabilities of the SAN storage that stores the critical military information in the electronic approval system of battle management system. Based on the analysis, we verify the possibility of information leakage by the inside attackers through the scenario-based experiment. And we finally propose a new storage encryption algorithm on the basis of user's role that can prevent the leakage of information by the inside attackers.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.71-78
• /
• 2012

The digital tachograph is a device that automatically records speed and distance of a vehicle, together with the driver's activity and vehicle status at an accident. It records vehicle speed, break status, acceleration, engine RPM, longitude and latitude of GPS, accumulated distance, and so on. European Commission regulation made digital tachographs mandatory for all trucks from 2005. Republic of Korea made digital tachographs mandatory for all new business vehicles from 2011 and is widening the range of vehicles that must install digital tachographs year by year. This device is used to analyze driver's daily driving information and car accidents. Under a car accident that makes the device reliability unpredictable, it is very important to store driving information with maximum reliability for its original mission. We designed and implemented a practical digital tachograph. This paper presents a storage scheme that consists of a first storage device with small capacity at a high reliability and a second storage device with large capacity at a low cost in order to reliably records data with a hardware at a low cost. The first storage device records data in a SLC NAND flash memory in a log-structured style. We present a reverse partial scan that overcomes the slow scan time of log-structured storages at the boot stage. The scheme reduced the scan time of the first storage device by 1/50. In addition, our design includes a scheme that fast stores data at a moment of accident by 1/20 of data transfer time of a normal method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.592-598
• /
• 2017

The purpose of this study is to suggest a new inspection period of ${\triangle}{\triangle}$ guided missiles by analyzing their reliability using field data. The ${\triangle}{\triangle}$ guided missile has an inspection period of five years which was determined using prediction data during its development process. However, from the analysis of its field data, it was shown that the inspection period could be extended to more than 18 years. Based on this result, a policy is proposed to reevaluate the inspection period by means of practical reliability tests.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.93-101
• /
• 2019

This study aims to analyze the influences of applications of two different evapotranspiration (ET) estimation methods on the irrigation water requirements (IWR) for paddy rice and water supply reliability of agricultural reservoirs. The modified Penman (MP), traditional method, and the Penman-Monteith (PM), the new adopted method, were applied on 149 reservoirs located in Honam province for this study. The weather date was used from 1987 to 2016, and analysed the trends of temperature and rainfall during rice growing season between past and current 10 years respectively. The increased average temperature and rainfall were observed from the current 10 years compared to the past years. This phenomena impacts on the results of ET and IWR estimations with decreased IWR obtained from high rainfall regions and increased ET obtained high temperature regions. For the comparisons of application results of two ET approaches, the PM method showed lower ET and IWR, and hence more reliable storage capacity of the reservoirs respect to water supply to paddy fields. The results also showed that the influences of different ET methods applications on the water supply reliability of reservoirs are negligible for the cases of over 3.7 watershed ratio and 670 mm unit reservoir storage, while significant variations of the results obtain from the applications between two ET approaches for the opposite cases. Further studies are necessary to consider various field conditions for practical applications of the PM method estimating ET in the fields of paddy farming.