• 한국전자통신학회논문지
• /
• 제9권9호
• /
• pp.1043-1049
• /
• 2014

본 논문은 원격제어 기능의 디지털 LCD 초시계를 설계하고 구현한다. LCD 초시계와 중앙제어기는 ATMEL의 대표적인 AVR계열 중에서 ATmega8 프로세서를 이용하며 8MHz의 크리스털 발진기의 클록 신호를 바탕으로 구현하였고, 기본 통신모듈은 ZBS-100으로 2.4GHz의 ISM 주파수대역을 이용하였다. 제안한 원격제어 초시계는 세 가지 문제를 해결할 수 있다. 첫째, 중앙에 설치된 대형 LCD 초시계 모니터 주시에 따른 토론자와 방송카메라 간의 시각 편차를 해결할 수 있다. 둘째, 카메라 교차 촬영방식의 번거로움을 피할 수 있으며, 셋째, 공개방송에서 방송카메라의 좌우이동 동작에 따른 시청자의 시야방해를 최소화할 수 있다.

• 한국전자통신학회논문지
• /
• 제9권7호
• /
• pp.835-840
• /
• 2014

본 논문은 선거방송에 참여한 토론자가 제한시간 확인을 위해 디지털 초시계를 빈번하게 곁눈질로 인하여 발생하는 토론자와 촬영 중인 디지털 방송 카메라와의 시각 불일치에 대한 시각편차에 대하여 해석하였다. 스튜디오와 같은 소규모 토론회에서는 토론 참여자와 온에어 방송카메라와의 시각 일치는 비교적 안정적이다. 그러나 공개토론이나 토론 참여자가 다수인 경우 중앙에 설치된 대형 LCD 모니터 초시계를 지속적으로 곁눈질함으로 발생하는 시각의 편차가 심각하다. 따라서 본 논문에서는 토론자 인원수, 데스크의 길이, 디지털 초시계와의 거리, 방송 카메라와의 거리와 높이에 따른 시각편차의 해석방법에 관하여 논한다.

• 기술사
• /
• 제22권3호
• /
• pp.5-13
• /
• 1989

A major problem of stopwatch time study is how to do for the accurate and consistent performance rating, which is one of the critical variables to determine the accuracy of work measurement and should be still dependent upon time observer's judgement. Therefore the time observer's ability for the performance rating is very important, and must be improved by correct training method and procedure. This paper developed a new benchmark and benchmark-observation method for the effective performance rating training of assembling and machining operations. The trainees' ability in the accuracy and consistency of the performance rating ,improved significantly after being trained by subject method. The percentage improvement in rating accuracy and consistency values was 34.7% and 49% respectively. In addition, benchmark-practice method for the performance rating training is not significant, so it is proofed that the skill of a certain operation is not important for the improvement of the rating ability.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1996년도 추계학술대회발표논문집; 고려대학교, 서울; 26 Oct. 1996
• /
• pp.13-16
• /
• 1996

This paper addresses the time and motion study on the woodworking in the primary school. Time study by stopwatch is performed for calculating the standard tie of woodworking. The operator process chart is developed for better illustration and teaching methodology. The purpose of this study is to present a good guideline for woman teachers or beginers(teachers), as well as to provide how much time units are adequate for a special woodworking unit of practice art. According to the result, the contribution of this paper is very much and it is very useful for both teachers and students.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.36.1-36.6
• /
• 2019

Objectives: The aim of this study was to compare the cyclic fatigue resistance of the WaveOne Gold Glider, ProGlider and One G glide path instruments in artificial doublecurvature canals. Materials and Methods: This study included 15 WaveOne Gold Glider (size 15/0.08), 15 ProGlider (size 16/0.08), and 15 One G (size 16/0.06) nickel titanium files. The files were used in accordance with the manufacturer's instructions until they were broken in artificial double-curvature canals made of stainless steel. The time to fracture was recorded via a digital stopwatch and the number of rotations until fracture was also calculated. The data were statistically analyzed via the Kruskal-Wallis test. Results: The highest average number of rotations until fracture of the files was found for the WaveOne Gold Glider, followed by ProGlider and One G in order. Statistically significant differences were present between all groups of files (p < 0.05). Conclusions: In our study, the resistance of the WaveOne Gold Glider nickel-titanium (Ni-Ti) file to cyclic fatigue in S-shaped curved canals was found to be higher than that of the ProGlider and One G Ni-Ti files.

• Journal of Nutrition and Health
• /
• 제31권8호
• /
• pp.1347-1354
• /
• 1998

The purposes of this study were to : (a) anlayze wating time, service rate, arrival rate, and coustomer expectations/satisfaction in cafeteria business foodservices and (b) identify the differences in those factors between foodservices by menu managmenet systems. The samples were two business foodservices operated by contract management in Seoul. The queue, laptime , service rate, and arrival rate were measured at each foodservice by stopwatch observation. The menu type, delivery system, number of meals served , servide time, and turnover rate of each foodservic was investigated. Questionnaires were developed to survey customer expectations and satisfaction. Satistical data analysis was completed using the SAS package programs for descriptive analysis and t-test. The mean waiting time of island type dafeteria system with separte set -menu was shorter than that of the other. In both foodservices, arrival rates were not significantly different from one another , but sevice rates were significnatly high in dafeteria menu systems. The peak time of the queue was found out at combination set menu line. The separate set menu line had a higher servide rate than the combination set menu line. The mean waiting time of the island type cafeteria line was shorter than that of the straifth type . At the straight type dafeterial line, both arrival rate and service rate were higher than those of island-type. The results of this study suggested that a separate set-menu would be more desirable than a combination set-menu in case of providing set menu with cafeteria menu.

• 한국전문물리치료학회지
• /
• 제4권1호
• /
• pp.30-38
• /
• 1997

The patients with hemiplegia show different body weight distribution as compared to normal subjects. These patients load their body weight more on sound leg than affected leg. The purpose of this study was to examine the effect of foot placement under three conditions: forward, intermediate, and backward placement, on body weight distribution and time needed to rise while assuming sit-to-stand. Fourteen patients with hemiplegia participated in the study. Their body weight distributions during sit-to-stand under the three different conditions were measured by a limb loader and time needed to rise was measured by a stopwatch. The data were analysed by the repeated measure of one-way ANOVA. Statistical Analysis demonstrated that body weight distribution was less asymmetric in backward foot placement. The difference of body weight bearing rate between sound leg and affected leg was significantly decreased as foot placement moved from forward to backward. These results show that backward foot placement during sit-to-stand make patient with henuplegia distribute their body weight more evenly on the lower extremity.

• 한국안광학회지
• /
• 제16권3호
• /
• pp.333-338
• /
• 2011

Purpose: The aim of this study was to investigate eye dominance and reading performance based on eye movements and reading speed. Methods: The eye dominance of 30 subjects was determined using the sighting test (hole formed by hands). The subjects were asked to read the numerical reading material aloud in English from left to right and from right to left at random. The number of saccades, regressions, and inter-fixations per minute was calculated using Visual-Oculography (VOG) and the reading speed was recorded as number of characters per minute using stopwatch. Results: No significant differences in reading speed among right and left eye dominant subjects as they read from left to right and right to left directions (p>0.05). However, left eye dominant subjects were found to read significantly faster compared to right eye dominant subjects in both directions of reading (p<0.05). In term of eye movement patterns, no significant differences in saccades, regressions, and inter-fixations per minute were found between subjects with right eye dominance and left eye dominance for both reading directions (p>0.05). Conclusions: Reading performance in term of eye movement and speed was not affected by eye dominance, but subjects with left eye dominance read faster than subjects with right eye dominance.

• 가정간호학회지
• /
• 제26권2호
• /
• pp.180-188
• /
• 2019

Purpose: To investigate the duration of each nursing activity performed by home care nurses for non-cancer patients and the relationship between patients' palliative prognostic index (PPI) and duration of each nursing activity. Methods: Nursing activities performed for six non-cancer terminal patients were timed using a stopwatch, and 18 parameters were measured by visiting each patient thrice. The mean and standard deviations of duration for each category of nursing activities were computed. The relationship between category-specific duration of nursing activities and PPI was analyzed with Spearman's correlation and multiple regression analysis. Results: Among nursing activities, the highest greatest duration of time was spent on traffic time (11.91 min), followed by urinary catheter management (10.65 min) and insertion and management of nasogastric tube (9.03 min). In terms of nursing categories, after excluding movement time, the greatest duration of time was spent on excretion care (5.48 min), nutrition care (5.40 min), and medication (3.82 min). PPI correlated with hygiene care, excretion care, and patient and information management. Multiple regression analysis revealed that PPI increased with increasing duration of hygiene care. Conclusion: These study findings provide grounds for the increased nursing time of hygiene care for people reaching the end of life.

• 대한후두음성언어의학회지
• /
• 제14권2호
• /
• pp.88-93
• /
• 2003

성악훈련을 받고있는 여학생들은 호흡훈련과 호흡훈련 보조기구를 이용하여 훈련을 하면서 발성연습을 하면 최대호기압과 최대흡기압이 증가하여 호흡근육의 근력이 증가하였다는 것을 알 수 있었으나 호흡기능에는 변화가 없어 호흡훈련에 의해 폐기능이 증진되지는 않는다는 결론을 얻게 되었다. 최대발성지속시간 역시 크게 증가하여 성악을 공부하는 학생들이 이 방법대로 훈련을 하는 것이 효과적이지 않을까 추정된다.