• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1674-1683
• /
• 2003

The performance of a packet data multiplexer with stop­and­wait ARQ protocols under Markovian interruption is considered in this work It is assumed that the input process, into the system is Poisson process, and that the output channel is divided into a series of time slots and a data packet can be transmitted in a slot time. In this system the round­trip propagation delay is defined to be the frame time. It is modeled that the output channel can be blocked by some Markevian interruption, whose state change between the blocking and non­-blocking states is given by Markov process. The overall system has been analyzed by constructing a relationship, taking the Markovian interruption into account, about the buffer behavior between the successive frames of slots. The validity of this analytical results has been verified by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1208-1220
• /
• 1996

In this paper, the performance of a Carrier Sense Multiple Access/Collision avoidance (CSMA/CA) protocol using stop-and-Wait automatic Repeat reQuest, which is adapted as a draft standard in IEEE 802.11, is analyzed using a mathematical method based on a renewal theory, and simulation checks are performed, which confirm the goodness of our anlysis. In order to anlayze of CSMA/CA, we model that network is composed of finite populationand channel is slotted. And, we consider the CSMA/CA protocol as a hybrid protocol of 1-persistent CSMA and p-persistent CSMA protocol. As resuls of analysis, we have found that the throughput is degraded and packet delay is increased as the number of stations, Acknowledgement (ACK) length and Distributed coordination function Inter Frame Space (DIFS) length are increased.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.438-443
• /
• 2020

To transfer files between nodes on network based on Ethernet, file transfer protocol (FTP) on TCP/IP and trivial file transfer protocol (TFTP) on UDP/IP are mostly used. Due to the lack of resources (processor, memory and so on) in the embedded system where we generally use for simple works with small firmware like ones; many of the systems implement only UDP/IP for their network stacks. Thus, TFTP is greatly to be preferred. For examples, environmental sensor devices for sensor networks, Boot Loader for general embedded device and preboot execution environment (PXE) boot for PC provide the TFTP. The logic of TFTP is simple for file transmission but, there is Stop-And-Wait problem during the process which occurs long blocking time. In this paper, we propose an algorithm which called QuTFTP(Quick UDP Trivial File Transfer Protocol) to reduce the length of the blocking time and to be compatible with the legacy TFTP.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.1-12
• /
• 1997

The performance of Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) protocol adopted as a draft standard of IEEE 802.11 wireless LAN, is analyzed by using mathematical method based on renewal theory. We introdude three kinds of CSMA/CA protocols basic, stop-and-wait and 4-Way handshake CSMA/CA with their mathematical analysis. First, a network of finite population is considered and then expand to infinite population. We model the CSMA/CA protocol as a hybrid protocol of 1-persistent CSMA and p-persistent CSMA protocol, and verify analaytical results by computer simulation. We have found that 4-Way Handshake CAMA/CA shows better performance than those of other two types of CSMA/CA in case of high traffic load.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.2
• /
• pp.11-18
• /
• 1995

Error detection in ARQ(Automatic Repeat Request) protocols is very important in wireless data communication systems. The throughput efficiency of ARQ protocols can be improved by dynamically adapting the protocol packet length so that it approaches the optimum value for throuhput efficiency. In this paper, a simple and novel adaptive packet length allocation method is proposed which transmits the packets with variable length by dyanmically estimating the channel codition. The simulation results show that the average of throughput is improved by 315.4% in the stop-and-wait protocol, 41.4% in the go-back-N protocol and 155.9% in the selective repeat protocol respectively. And the throughput performances of adaptive packet length allocation method approximately approach the theoritically optimal throughput performances.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.179-189
• /
• 2000

Recently, due to the increasing interests in deep sea development, all possible efforts to the development of underwater unmanned working vehicles such as AUV(Autonomous Underwater Vehicle) or underwater robot are exerted. This paper proposes a new efficient acoustic-based underwater image data communication system, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allowsfast data transmission through the multiple ultrasonic communication channel. Proposed system consists of an acoustic transducer which operates at 136kHz center frequency and it's 10kHz bandwidth, pre-amplifier, $\pi/4 QPSK$(Quadrature Phase Shift Keying) modulation/demodu-lation method, image compressing method using JPEG technique and modified Stop & Wait protocol. The experimental result of the system make it possible to transfer the underwater image as a high throughput at the basin test. The results of test are also verified which allows to desirable transmission performance compared with the existing developed system and the possibility to put the practical use of survey and investigation in the water.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.131-140
• /
• 2011

Smart packet agent is an application that is proposed to provide routing protocol and service module in ubiquitous network environment. However, it uses multi-hop broadcast, thus it causes increasing network traffic, low-speed data transmission, and the unnecessary joining nodes. In this paper, a transmit technique that uses unicast-based multi-hop to have lower network traffic and faster transmission time than the multi-hop broadcast technique. In our scheme, u-Zone Master establishes temporary routing paths by calculating moving nodes' hop-counter. Therefore, it reduces smart packet agent's network traffic and retransmission rate. Besides, this paper proposed an UDP transmission that bases on sliding window. Hence, the Stop & Wait transmission speed is improved. The results, which are taken by analyzing performance prove that the proposed scheme has better performance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.117-130
• /
• 1999

In this paper, the performance of data communication function of military radio equipment P-999K is analyzed based on the standard CSMA/CA protocol which is DFWMAC standard protocol done by IEEE802.11 work group. Basic three standard protocols, i.e. Basic CSMA/CA, Stop & Wait ARQ and 4-Way Handshake CSMA/CA protocols are analyzed and compared with each other under the hidden terminal environment. The computer simulation is also done by using SIMSCRIPT II.5 which is popular software tool for an independent processing. The results show that p-persistent(with p=0.3) CSMA scheme is superior to non-persistent CSMA scheme with non-hidden terminal condition, but the performances of both schemes are almost same with hidden terminal situation. And the results of computer simulations are also showed that Basic CSMA/CA protocol is superior to the other protocols when the ratio of hidden terminals is below 10 % of total user population, however, with the above 20% hidden terminals environment and the higher offered traffic conditions the 4-Way Handshake CSMA/CA protocol shows the most superior performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.723-729
• /
• 2014

When the bluetooth technology of smartphone is applied to a remote control system, communication errors caused by wave attenuation and interference results in the shortening of communication distance, loss of the target device control and malfunctioning. In this study, we propose a method to adopt a retransmission persistence controlled S/W ARQ in bluetooth communication to minimize the effect of the communication failure and to detect and handle the state where the target device gets lost control. We implemented a motor-driven RC car equpped with a bluetooth communication module and a steering application program on smartphone to test the proposed method. The experiments are conducted in three communication environments, and have resulted in the increase of the communication distance by at least 30% when S/W ARQ is applied. Moreover, when the communication was disrupted due to environmental disturbances, the S/W ARQ based system stopped immediately any undergoing operations to avoid possible malfunction.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.519-523
• /
• 2003

This paper describes the communication system of sequencing sorter. Generally sequencing sorter is a machine that sorts mails by delivery order. And designed sequencing sorter is composed of 5 physical modules. So, it is necessary to communicate with each module and to control this communication. A computer called Machine Management Computer, controls this. This paper is about the communication system with MMC and module controllers. This is PC-based, asynchronous full-duplex 4-wire serial systems. 3 protocol layers are presented and stop-and-wait flow control is adopted. Because designed sequencing sorter has to be operated high speed about 27,000 letters per hour, we analyzed the network traffic in the worst case. So, we could find that the communication system has to use above 115,200bps speed.