• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.205-217
• /
• 2014

The stone artifacts in Bronze age from the Sinsongri sites in Seosan, Korea were studied on material characteristics and provenance presumptions. The use and rock names of the artifacts are a stone before processing, two semifinished stone arrowheads and a grinding stone plate by slates. In addition, there is semifinished stone arrowhead by andesitic rocks. The slate could be observed easily around the site, and the andesitic rock could be confirmed typical occurrences of the all kinds of rocks around the Kanwoldo and Hwangdori, Anmyun area above 10km from the site. As a result of analysis which is comparing between stone artifacts and same kinds of raw material rocks, the stone artifacts made by slates have similar lithology and geochemical characteristics however, the stone artifacts made by andesitic rocks are found a some different part of characteristics to the same kind of raw material rocks. Comparing of major, rare earth, compatible and incompatible elements about stones artifacts made by slates and by the same kinds of raw material rocks have same geochemical patterns. However stone artifacts made by andesites and the raw material rocks are confirmed some differences of geochemistry. Therefore the slate stone artifacts in Sinsongri site suggest that these are domestic-type which are made of the rocks around the site, and it was understood that the andesitic stone artifacts are foreign-type which need to get more geological survey and study about different volcanic artifacts of the site around the area.

• Journal of Conservation Science
• /
• v.21
• /
• pp.5-20
• /
• 2007

The stone artifacts in Bronze age from the Hyocheon sites in the Gwangju, Korea were studied on the basis of material characteristics and provenance presumptions. The use and rock names of the artifacts are a stone shovel by andesite, the stone grinding pestle by pyrophyllite, the stone sickle by schist and four stone semifinished artifacts by slates. Andesitic stone shovel could be observed easily around the Hyocheon relic site. But, rocks of the stone grinding pestle, the stone sickle, the stone arrowhead and the stone semifinished artifacts could be confirmed typical occurrences of the all kinds of rocks around the Hwasun coal mine area above 10km from the site. These are made the coupled samples with each stone artifact to the same kinds of raw material rocks based on analysis of the lithology and geochemistry. As a result a geochemical evolution trends of both a stone artifact and the rock showed very similar patterns based on normalization using the behavior, enrichment, compatibility and incompatibility of the elements. Therefore, the source rock of the stone shovel was convey from Mudeung mountain possible interpreted that the domestic-type artifacts are distributed in the vicinity of the Hyocheon site. On the other hand, the stone grinding pestle, the stone sickle, the stone arrowhead and the stone semifinished artifacts were convey from the Hwasun coal mine area possible foreign-type stone artifacts interpreted that the source rocks. Consequently, in the foreign-type stone artifacts are should archaeologic research which it can examine various possibilities clearly that the possibility to coming the introduction with the mankind migration, diffusion to dealings of tribe, the captured enemy equipment through the war and the trade with the behavior of the materials.

• 보존과학연구
• /
• s.28
• /
• pp.169-182
• /
• 2007

It is very difficult to attain stable and satisfactory result satisfaction from newly developed materials and methodologies for conservation of cultural properties. In order for an effective conservation method, it is necessary that the manual for application of the proper materials and its methodology should be set up. However, stone conservation value must be established in advance of the manual, because the philosophical concepts and the technical methodology are not standardized. In this study, therefore, the conservators' opinion about the conservation for stone artifacts was collected. The opinions were based on the questionnaire about cleaning of surface contamination on masonry, and hereafter those will be referred to the conservation method about stone artifacts.

• 보존과학연구
• /
• s.22
• /
• pp.115-132
• /
• 2001

No. 3 Tomb of Bogam-ri, in Naju City, Chollanam-do Province, was a site excavated and inspected from 1996 to 1998 and had a various grave forms, including jar-coffins, stone-chambers and stone-cists. Although most of the metal artifacts excavated from it were severely corroded, we could implement microstructure investigation by collecting samples from the iron axes, iron coffin-nails and iron clamps in which the metal parts were remained. The metal structures were inspected by using metallographic microscope and SEM, and fine components analysis was implemented by ICP. To examine the hardness differences in accordance with the structure distribution, we measured the hardness by structures with Vickers hardness testing machine. As a result of the metal structure inspection, most of them were pure iron, ferrite, and also pearlite, cementite and widmannstaten structures were displayed. We could confirm carbonization was formed on the surface of the iron axes-B, iron coffin-nails-B, and iron clamps-A. There was no carbonization in the rest of the artifacts, and it is not certain that whether the carbonized parts were peeled off through extreme corrosion or they were not carbonized when they were made. In the particular part of a blade, the quality of the material was strengthened through processing. Due to the processing re-grain was caused and fine grain particles were formed. As a result of the ICP component analysis, there were no addition atoms because pure irons were used as materials. In the mean time, No. 17 jar-coffin where the iron axes-A are excavated, is chronologically ordered as from the late-fourth century to the mid-fifth century, and No. 1 and No. 2 stone chambers, where the rest of the artifacts were excavated, as the early-sixth century. It was difficult to relate the periodic differences with the manufacture technique artifacts which we inspected because there were no distinct characteristics of the manufacture technique of the metal structures and it is impossible to conclude the artifacts and sites are at the same period although their periods are different.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.147-157
• /
• 2015

TExhibiting replicas of major artifacts is becoming common recently to raise their value and help the public to understand them. In Korea, more attention is paid only to appearance in creating replicas of artifacts. It is required to study reproduction technology minimizing damages to originals and applicable to massive artifacts like sculptures in the situation that replicas and artifact reproduction is increasing. To make a replica of the Stone Lion Statue excavated from Woljeong Bridge, a measured drawing and a cross section are produced based on art historical surveys using 3D scans. A non-contact reproduction method is selected. The strength of the non-contact reproduction method is that the output is detailed. Athough the non-contact method has known to be applicable only to small scale artifacts and require reprocess, it is discovered to be applicable to detailed statues like this lion statue. Therefore, this study may contribute to complement the historic authenticity of the statue as well as to raise its academic value. It also can be utilized as research material of similar artifacts'replicas and restoration.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.549-556
• /
• 2018

In November 2011, various artifacts were excavated from the No. 8 stone-lined tomb in Suchon-ri, Gongju by the Chungnam Institute of History and Culture. These included artifacts with lacquered mainframe and silvery metal ornament. These were recovered together with soil and underwent conservation treatment. In this paper, we discuss the scientific analysis and conservation treatment of the lacquered artifacts excavated from the Suchon-ri site. Among our findings is that the artifacts have three layers of lacquer coating and the metal parts are primarily composed of Ag. As the artifacts were recovered with soil from the site, the soil was removed from underneath and inside the artifacts. The inside of the lacquerware was reinforced with rayon paper using 3% funori, and the metal was treated with acrylic resin after removing the acrylic resin previously used to recover the artifact, followed by cleaning. The metal was also internally reinforced with gauze. Finally, the interior reinforcement was made using PVA and resin in pulp and attached with funori to preserve the shape of the lacquerware, and the exposed rayon was finished with acrylic paint. The main advantages of this study are its review of conservation treatment strategies for lacquer artifacts whose numbers have recently increased, and the application of new conservation treatment methods.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.134-149
• /
• 2013

The Sudang-ri Site in Geumsan is considered the historic site where Baekje dominated the inland traffic route to Gaya through Geumsan and Jinan in the 5th Century. This study identified the production techniques of iron by conducting an analysis of metallographical microstructure of the artifacts such as an iron sword and an iron sickle that were excavated in Sudang-ri Site, Geumsan, one of the regions ruled by Baekje, and tried to figure out the characteristics and the technical systems of Baekje's ironmaking around the 5th Century by comparing them with other iron artifacts produced around the same time. The analysis showed that various production techniques were applied to the artifacts excavated in Sudang-ri Site, Geumsan. Depending on the production techniques, they can be divided largely into three methods: the simple shape-forging method, the steel manufacture method after forging, and the steel manufacture & heat-treatment method after forging. The iron sickle from the stone chamber tomb No. 1, which was produced only through forging, is mostly composed of soft ferrite at both edges of the blade and at the rear making the use of the weapon impractical. From this fact, it is presumed that they were produced as burial objects or ceremonial accessories for the person buried. The iron axe from the outer stone coffin tomb No. 1 and the iron swords and sickle from the outer stone coffin tomb No. 12, which were produced through the steel manufacture method after forging such as carburizing, did not go through the heat treatment such as quenching, but applied different production processes to each part. Therefore, it is deemed that they were produced as daily tools for cultivation rather than burial objects or ceremonial accessories. The production techniques following the forging process - carburizing and heat treatment - can be found on the iron swords from the outer stone coffin tomb No. 5 and the outer stone coffin tomb No. 12. The sturdy structure of the blade part and the durable structure of the rear processed with heat are deemed to have been produced as weaponry and used by the person buried. Based on the analysis of the iron artifacts excavated from Sudang-ri Site in Geumsan, the characteristics of iron production techniques were investigated by comparing them with the artifacts from Yongwon-ri Site in Cheonan, Bongseon-ri Site in Seocheon, and Bujang-ri Site in Seosan that were made around the same time as the cluster of Baekje tombs examined by the metallographical microstructure analysis of this study. For the iron artifacts analyzed here, the changes in the techniques were investigated using the iron swords common in all of the tombs. In the case of the iron swords, it was identified the heat treatment technique called tempering was applied from the 4th Century.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1049-1055
• /
• 2023

The purpose of this study was to investigate the association of twinkling artifacts according to the types of urinary stones in color Doppler ultrasound. For two types of urinary stones with different colors, the degree of occurrence of color Doppler twinkling artifact in water tank was analyzed, and the surface condition and composition of the stones were analyzed. The composition of Calcium and phosphorus were the most frequent components in white and brown stones excluding carbon and oxygen. Twinkling artifacts of color Doppler appear stronger in brown stone. The higher the phosphorus content of the stones, the shorter the twinkling artifact appears, so it is possible to predict the main composition of stones.

• Journal of Conservation Science
• /
• v.33 no.4
• /
• pp.241-254
• /
• 2017

The Stone Guardian and Memorial Tablets from the Muryeong Royal Tomb are composed of the same kind of plutonic igneous rocks, the so-called hornblendite. Color of the rocks show greenish gray, and both of them occurred with medium-grained granular texture. The rock-forming minerals composed mainly of amphibole and plagioclase. Magnetic susceptibility of the Stone Guardian is 0.15 to 0.63 (mean $0.42{\times}10^{-3}SI\;unit$), the King's Stone Memorial Tablet is 0.11 to 0.38 (mean $0.24{\times}10^{-3}SI\;unit$) and the Queen's Stone Memorial Tablet ranges from 0.10 to 0.33 (mean $0.18{\times}10^{-3}SI\;unit$). The rocks of the artifacts are hard to find in the Gongju area. Large scaled out crop of hornblendite is not distributed, but found in many places that the form of dike. The lithology and occurrences indicate that the artifacts are made of plutonic rock rather than dike. Reddish brown and pale brown contaminants, are also distributed on the surface of the Stone Guardian and Memorial Tablets. The reddish brown color is due to Fe oxide, and the pale brown color occurs due to the elution of Ca. The reddish brown contaminants are influenced by the internal components of the rock and oxidation of burial iron accessories. In contrast, the pale brown contaminants are considered to have flown from the carbonate materials used in the Royal Tomb, with a little added Fe oxide. Physical and chemical deterioration operate intricately in the Stone Guardian and Memorial Tablets. Physical deterioration is extremely rare and chemical deterioration is stable except for a part of the Stone Guardian and the front of the Queen Stone Memorial Tablet.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.222-241
• /
• 2020

The Taereung Royal Tomb from the Joseon Dynasty is the tomb of Empress Munjeong, the second queen of King Jungjong, and it contains various types of stone artifacts. All of these stone artifacts were constructed using coarse- to medium-grained biotite granite. The major types of deterioration of the stone artifacts are identified as surface weathering and biological contaminants. Exfoliation (145 sculptures), granular decomposition (138 sculptures), and repair materials (156 sculptures), along with biological contaminant algae (154 sculptures), lichen (165 sculptures) and moss (97 sculptures), have a high occurrence frequency. In particular, it is deemed that immediate conservation treatment is required, as biological deterioration (algae) represents the most serious condition (grade 3 or higher in 94% of all stones), and it is thought that exfoliation and granulation decomposition are required for long-term conservation management. As a result of equo -tip hardness and ultrasonic measurement, more than 70% of stones were found to have very weak physical properties. Through hyperspectral analysis, organisms were shown to inhabit more than 80% of the surface of burial mound stone artifacts, and P (phosphorus), S (sulfur), Cl (chlorine), and Ca (calcium) were detected in this area. This is because Taereung Royal Tomb has been exposed to the outdoors for hundreds of years and has been weathered by physical, chemical, and biological factors. Therefore, among the stone artifacts in the Taereung Royal Tomb, those with high physical weathering grades are considered to require consolidation to reinforce them physically. Since organisms are highly likely to cause stone damage, they must be removed via dry and wet cleaning. In addition, in order to delay the reoccurrence of organisms following conservation treatment, it is necessary to regularly clean up the soil that has flowed into the burial mound, and to monitor conservation conditions over the long term.