• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.98-104
• /
• 2010

The objective of this study was to understand the origin and characteristics of stone tower's style through the study of the 'Village Shrine at Seoji-ri, Andong'. The three kinds of stone towers were located forming a line of 9m on the hill of a red pine forest along the stream in the village. Toward the direction looking at the village, the three-story stone located on left, the two-story stone located in the middle, and the common style stone tower located on right. The bottom part of the three-story stone was 2.5m in length, 1.8m in width, 1.3m in height. The bottom part of the two-story stone was 1.3m in length, 1.5m in width, 0.9m in height. The common style stone heap tower was 3.0m in diameter, 1.8m in height with a cone shape. The small hat-shaped stone was presumed to be the top part of a three-story stone. According to the three factors(heaven, earth, human) of the idea of the universe in Korea, most ancient remains have components of odd numbers. Then it had been substituted with smaller three-story stone(at present, two-story stone). And then altered to a common stone tower later, such as the 'Village Shrine at Seoji-ri, Andong' that shows the combination of the Bronze Age's megalithic and a folk religion. The 'Village Shrine at Seoji-ri, Andong' is a valuable relic that shows the stone towers, and is derived from the Bronze Age. The 'Village Shrine at Seoji-ri, Andong' shows that the 'Village Shrine at Seoji-ri, Andong' was embodied the three-factor(heaven, earth, human) idea of the universe in three-story stone of megalithic culture' remains.

• Smart Media Journal
• /
• v.13 no.4
• /
• pp.114-123
• /
• 2024

This paper proposes AR stone tower content, an experiential content based on wearable augmented reality (AR). Although wearable augmented reality is gaining attention, the acceptance of the technology is still focused on specialized applications such as industrial sites. On the other hand, the proposed AR stone tower content is based on the material of 'stone tower' so that general users can relate to it and easily participate in it, and it is organized to utilize space in a moving environment and find and stack stones based on natural hand gestures. The proposed AR stone tower content was implemented in the HoloLens 2 environment and evaluated by general users through a pilot exhibition in a small art museum. The evaluation results showed that the overall satisfaction with the content averaged 3.85, and the content appropriateness for the stone tower material was very high at 4.15. In particular, users were highly satisfied with content comprehension and sound, but somewhat less satisfied with object recognition, body adaptation, and object control. The above user evaluations confirm the resonance and positive response to the material, but also highlight the difficulties of the average user in experiencing and interacting with the wearable AR environment.

• Journal of architectural history
• /
• v.10 no.2 s.26
• /
• pp.21-34
• /
• 2001

The purpose of this study is that it is made clear the construction method of Japanese Castle Architecture in Korea as I study the construction method of Suncheon-Japanese Castle(順天倭城) in those days of Jeong-yu Japanese Invasion. Moreover, I intend to analyze the similarity and the difference between Suncheon-Japanese Castle and Korean Castle Architecture by a comparative study. The result of the study is showed that Suncheon-Japanese Castle seemed to be built with the object of a long time stay rather than it was of strategic importance for the national defense. In addition, it was different from other Japanese Castle in Korea because the watch tower(天守閣) of it stood in the middle of stronghold and the watch tower stronghold dividing the round of it while that of it stood the comer of stronghold. The face stone used in important part of watch tower, gate, and so on was mostly a trimed hexangular stone. On the other hand, the face abbuting on the Gulf of kwang-yang was made of naturally wild face stone. The stone cleared traces of Si-hyeol(矢穴) and domestic Castle in Japan was also made of this method after Im-Jin Japanese Invasion. According to the construction method, the wall of castle made use of the Netak(內托) method except the gate, the support stronghold and the watch. The early mountain castle in Korea have this construction method in common.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.1
• /
• pp.19-29
• /
• 2019

Recent earthquakes in Korea caused some damages to stone pagodas and thereby awakened the importance of earthquake preparedness. Korean stone pagodas which have been built with very creative style of material use and construction method are worthy of world heritage. Each stone pagoda consists of three parts: top; body; and base. However each tower is uniquely defined by its own features, which makes it more difficult to generalize the seismic assessment method for stone pagodas. This study has focused on qualitative preliminary evaluation of stone pagodas that enables us to compare the relative seismic performance across major aspects among many various Korean pagodas. Specifically an analytical model for multi-block stone pagodas is to be proposed upon the investigation of structural characteristics of stone pagoda and their dynamic behavior. A strategy for seismic evaluation of heritage stone pagodas is to be established and major evaluation factors appropriate for the qualitative evaluation are identified. The evaluation factors for overall seismic resisting behavior of stone pagodas are selected based on the dynamic motions of a rigid block and its limit state. Numerical simulation analysis using discrete element method is performed to analyze the sensitivity of each factor to earthquake and discuss some effects on seismic performance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.3 s.39
• /
• pp.11-22
• /
• 1990

Culture has long been associated with and advanced by stone as observed in prehistoric dolmen, menhir, megalith monuments, memo-rial stones, and others. The closs association of monuments is seen even in an earlist form of culture and is witnessed to evolve with human history. Korea, with its large quality granite repository, has been active with granite-based monuments in various forms of towers, bridges, and larterns. These stone structures are so abundant throughout Korea that Korea has been called the country of stone tower in Asia. With this historical background, we survey these Korean memorial stone and monuments, found at roadsides, momerial buildings, village entrances, scenic places, schools, sermon halls, public pleasure ground, and other common places. Based on installation orientation, location, and size, a particular emphasis is on the structural value, meaning, beauty, and function of these momnuments coupled with trees, shrubs, water and appropriative landscapes.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.6
• /
• pp.305-314
• /
• 2021

The Gyeongju and Pohang earthquakes caused damages to many cultural properties; particularly, stone pagoda structures were significantly damaged among masonry cultural properties. To preserve these structures, it is necessary to understand their dynamic behavior characteristics under earthquakes. Analyses on such areas as deformation, frequency, maximum acceleration, permanent displacement, sliding, and rocking have to be performed. Although many analytical studies have already been conducted, dynamic behavior studies based on experiments are insufficient. Therefore, this study analyzed dynamic behavior characteristics by performing a shaking table experiment on a three-story stone pagoda structure at the Cheollongsa temple site damaged by the Gyeongju earthquake. As a result of the experiment, the displacements of stylobates did not occur significantly, but the tower body parts rotated. In particular, the rotation of the 1F main body stone was relatively larger than that of the other chief body stones because the 1F main body stone is relatively more slender than the other parts. In addition, the decorative top was identified as the component most vulnerable to sliding. This study found that the 1F main body stone is vulnerable to rocking, and the parts located on the upper part are more vulnerable to sliding.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.33-40
• /
• 2022

Recently, cultural heritages in South Korea gain many interests of restoration and preservation from the government since many of that have been severely damaged during earthquakes. Many previous studies in both terms of experimental and analytical approaches have been done to examine structural behavior and decide appropriate methods of preservation. Being motivated by such researches, this research aims to investigate a religious stone pagoda dated back to the Goryeo Dynasty in Korea. The structure consists of a granite stone foundation and baked bricks, which resembles the shape of traditional pagodas. In order to examine the structural behavior of the pagoda, an analytical model is implemented using ANSYS, a comprehensive engineering simulation platform. For the time history analysis of the pagoda, several earthquake excitations are chosen and input to simulation modeling. Seismic response of the tower such as time domain, natural frequency, modal shapes and peak acceleration measured at each layer are presented and discussed. In addition, the amplification ratio of the tower is calculated from the accelerations of each layer to determine tower stability in accordance with Korean seismic design guide. The determination and evaluation of status and response of the brick tower by simulation analysis play an important role in the preservation of history as well as valuable architectural heritages in South Korea.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.190-205
• /
• 2016

Buddhist stupas, which are a symbolic architecture of Buddhism and enshrine the Jinsinsari of Buddha, were reinvented as stone stupas appropriate for the natural soil of Korea from existing wooden stupas around the 7th century after the introduction of Buddhism. Later, the construction of a stone stupa was expanded to local areas from the central area around the 9th century; thus, stone stupas of more diverse local colors were built in a nationwide scale, and today it is called a "country of stone stupas". While focusing on the stylistic interchanges between stone stupas, which were established in each region in accordance with the localization of the establishment of stone stupas that was begun actively from the 9th century, this paper selected several cases of stone stupas among about 50 stone stupas in the Gangwondo-region. First, the study compared the stone stupas and Buddhist priest tower of Seollimwonji, Jinjeonsaji, and Geodonsaji, which are located at the same temple site as the current Buddhist priest tower, from among typical Silla style stupas that match the 9 stone stupas in the Gangwon-do region. This is because stylistic interchanges were possible while there were mutually organic relationships between Buddhist statues such as stone stupas, Buddhist priest towers, stone lanterns, and Buddhist pedestals, which used the same stone material along with the expansion of Buddhism to local areas in accordance with the spread of Zen Buddhism in the 9th century. Second, a comparison was made of the stylistic similarities between the Woljeongsa Palgakgucheong (eight sides nine-storied) stone stupa and the Sinboksaji Samcheung (three-storied) stone stupa, which are totally different in regard to the number of stories and the flat form. These two stone stupas are representative Goryeo stone stupas. The Woljeongsa stone stupa is a Goguryeo-oriented stone stupa with many sided multiple stories whereas the Sinboksaji stone stupa has been known as an early case of the insertion of the support of Tapsin in each story. Although the two stone stupas may look very different, but through close investigation it was confirmed that there were many stylistic interchanges between them and not only the seated stone Buddha statue in the cylinder jewel case in front of the stupa but also the stone stupa established by the same master. Consequently, this paper aimed not merely to mention the simple patterns of stone stupas, but, further, to trace the interchange in patterns in accordance with the construction period based on those patterns.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.27-34
• /
• 2023

This paper studied the 3D modeling process for the restoration of the 'Three-story Stone Pagoda of Bulguksa Temple in Gyeongju', a stone pagoda from the Unified Silla Period, using artificial intelligence (AI). Existing 3D modeling methods generate numerous verts and faces, which takes a considerable amount of time for AI learning. Accordingly, a method of performing more efficient 3D modeling by lowering the number of verts and faces is required. To this end, in this study, the structure of the stone pagoda was deeply analyzed and a modeling method optimized for AI learning was studied. In addition, it is meaningful to propose a new 3D modeling methodology for the restoration of stone pagodas in Korea and to secure a data set necessary for artificial intelligence learning.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.1
• /
• pp.24-37
• /
• 2005

In this study we examined the geomorphological and geological characteristics of the granite landforms in the Iksan area. Moreover we investigated the source areas of stones which are used to build the Mieruksaji west stone pagoda. Joint is most identifiable geomorphological and geological structure in the Iksan area. Direction of J1 joint appears to be N71°E∼EW, and that of J2 joint ranges N20°W∼N20°E. Cross-pattern joint is predominant in the study area, and linen.-pattern vertical joint is also observed. Tor and corestone are easily found as geomorphological features in the study area. Corestones forming for are almost 2∼3 m across and 2∼3 m or over 5 m high. Their hardness is mainly of hammer bounce. Tower-type and castle-type of for are characteristic in the Mireuksan granites. Other geomorphological features such as tafoni, gnamma are also observed in the study area. Petrographical and geochemical features of the stones used for the Mireuksaji west stone pagoda are compared with those of the granites cropped out nearby, and indicate that the stones from the Mieruksaji west stone pagoda are quite similar to the Mireuksan granites. In the Mireuksan we can easily find lots of old traces for rock cutting.