• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.525-531
• /
• 1998

Czochralski법으로 congruent(48.6mol% $Li_2O$)한 조성의 $LiNbO_3$와 congruent한 조성에 Fe2O3를 0.05mol%, congruent한 조성에 $K_2O$를 6wt%, congruent한 조성에$K_2O$와 $Fe_2O_3$를 각각 6wt%, 0.05mol% 첨가한 융액으로부터 $LiNbO_3$ 단결정을 c-축 방향으로 성장시켰다. 성장된 결정들은 편광 현미경과 Laue법에 의해 축을 결정한 후 절단하여 연마하였다. 시료들은 상온에서 XRD pattern을 측정하고 상온~$1230^{\circ}C$의 온도영역과 100Hz~13MHz의 주파수영역에서 유전율을 측정하였으며 상온에서 결정내 $Fe^{3+}$ 이온에 대한 ESR 스펙트럼과 UV-VIS, IR영역에서의 투과율을 측정하였다. Congruent한 조성에 $K_2O$를 6wt% 첨가한 융액으로부터 성장시킨 결정의 상온에서의 XRD pattern은 congruent한 조성의 결정과 거의 같으며 상전이온도(Tc)는 증가하고 $Fe^{3+}$을 첨가하면 ESR 스펙트럼은 세기가 증가하며 lineshape가 거의 대칭적으로 되고 선폭도 훨씬 줄어든다. 또 UV-스펙트럼의 흡수단은 단파장쪽으로 이동하며 OH- 이온에 대한 IR-흡수 스펙트럼은 2886nm 성분 스펙트럼이 현저하게 증가한다. 이 결과에 의하면 congruent한 조성에 $K_2O$를 6wt% 첨가한 융액으로부터 성장시킨 결정은 결정 내의 [Li]/[Nb]비가 1에 가까운 거의(nearly) stoichiometric한 결정이 되었음을 알수 있다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.499-502
• /
• 2004

Groundwater chemistry in a coastal region having complex contaminant sources was investigated. Water analysis data for 197 groundwater samples collected from the uniformly distributed sixty-six wells were used. Chemical analysis rand results indicate that groundwaters show wide concentration ranges in major inorganic ions, reflecting complex hydrochemical processes of pollutants. Due to the complexity of groundwater chemistry, Results illustrate that thirty five percent of the wells do not fit for drinking based on nitrate and chloride concentration in the study area. the samples were classified into four groups based on Cl and NO$_3$ concentrations and the processes controlling water chemistry were evaluated based on the reaction stoichiometry. The results explained the importance of mineral weathering, anthropogenic activities (nitrification and oxidation of organic matters), and Cl-salt inputs (seawater, deicer, NaCl, etc.) on groundwater chemistry. It was revealed that mineral dissolution is the major process controlling the water chemistry of the low Cl and NO$_3$ group (Group 1). Groundwaters high in NO$_3$ (Groups 2 and 4) are acidic in nature, and their chemistry is largely influenced by nitrification, oxidation of organic matters and mineral dissolution. In the case of chloride rich waters (Group 3), groundwater chemistry is highly influenced by mineral weathering and seawater intrusion associated with cation-exchange reactions.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.611-615
• /
• 2012

In this study non-stoichiometric $(K_{0.5}Na_{0.5})_{0.97}(Nb_{0.96-x}Ta_xSb_{0.04})O_3$ ceramics were prepared by the conventional soild-state teaction method. The effect of Ta-substitution on the dielectric and piezoelectric properties were investigated. X-ray diffraction analysis of all the specimens less than x= 15 mol% indicated orthorhombic phase. Thereafter, the specimens showed orthorhombic phase near to pseudo-cubic. Sinterablity of all the specimens was improved due to secondary products such as KCT and KCN. The ceramics with x= 5 mol% showed the optimum velues of pizoelectric constant($d_{33}$)= 150 pC/N, electromechanical coupling factor (kp)= 0.45, electromechanical quality factor (Qm)= 418.9 and dielectric constant(${\varepsilon}_r$)= 567. Accordingly, These results indicate that the composition ceramics is a promising candidate for lead-free material.

• 한국자기학회지
• /
• 제18권5호
• /
• pp.190-194
• /
• 2008

FePd 합금박막을 스퍼터링법으로 초격자 박막의 형태로 제작하고 기판온도, 조성변화에 따른 미세구조 및 자기적 특성을 분석하였다. FePd 합금박막의 규칙화를 위한 열처리 온도를 FePt의 열처리 온도에 비해 $150^{\circ}C$ 낮추는데 성공하였다. 또한 FePd 규칙화 합금 박막은 화학양론적 조성일 때 장범위 규칙도는 가장 높은 값을 가졌으며(Fe조성 50 at.%, S = 0.79), 자기이방성 에너지는 Fe 조성이 약간 낮은 조성에서(Fe조성 48 at.%, $K_U=1.6{\times}10^7\;erg/cm^3$) 가장 높은 값을 나타내었다. 이것은 FePd 합금박막의 조성이 장범위 규칙도와 수직자기이방성에 직접적으로 영향을 미친다는 것을 나타낸다.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.793-797
• /
• 2014

To develop a methodology for absolute determination of the surface areal density of functional groups on organic and bio thin films, medium energy ion scattering (MEIS) spectroscopy was utilized to provide references for calibration of X-ray photoelectron spectroscopy (XPS) or Fourier transformation-infrared (FT-IR) intensities. By using the MEIS, XPS, and FT-IR techniques, we were able to analyze the organic thin film of a Ru dye compound ($C_{58}H_{86}O_8N_8S_2Ru$), which consists of one Ru atom and various stoichiometric functional groups. From the MEIS analysis, the absolute surface areal density of Ru atoms (or Ru dye molecules) was determined. The surface areal densities of stoichiometric functional groups in the Ru dye compound were used as references for the calibration of XPS and FT-IR intensities for each functional group. The complementary use of MEIS, XPS, and FT-IR to determine the absolute surface areal density of functional groups on organic and bio thin films will be useful for more reliable development of applications based on organic thin films in areas such as flexible displays, solar cells, organic sensors, biomaterials, and biochips.

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.434-440
• /
• 2014

Silicon carbide(SiC) layer is particularly important tri-isotropic (TRISO) coating layers because it acts as a miniature pressure vessel and a diffusion barrier to gaseous and metallic fission products in the TRISO coated particle. The high temperature deposition of SiC layer normally performed at $1500-1650^{\circ}C$ has a negative effect on the property of IPyC layer by increasing its anisotropy. To investigate the feasibility of lower temperature SiC deposition, the influence of deposition temperature on the property of SiC layer are examined in this study. While the SiC layer coated at $1500^{\circ}C$ obtains nearly stoichiometric composition, the composition of the SiC layer coated at $1300-1400^{\circ}C$ shows discrepancy from stoichiometric ratio(1:1). $3-7{\mu}m$ grain size of SiC layer coated at $1500^{\circ}C$ is decreased to sub-micrometer (< $1{\mu}m$) $-2{\mu}m$ grain size when coated at $1400^{\circ}C$, and further decreased to nano grain size when coated at $1300-1350^{\circ}C$. Moreover, the high density of SiC layer (${\geq}3.19g/cm^3$) which is easily obtained at $1500^{\circ}C$ coating is difficult to achieve at lower temperature owing to nano size pores. the density is remarkably decreased with decreasing SiC deposition temperature.

• 한국결정성장학회지
• /
• 제12권1호
• /
• pp.36-41
• /
• 2002

$H_2$(5%)/Ar의 환원분위기에서 $900^{\circ}C$ 이상의 온도로 소결함으로써 화학양론적인 조성비를 만족하면서 이중 페롭스카이트 구조를 갖는 $Sr_2FeMoO_6$ (SFMO) 소결체를 제조하였다. SFMO 소결체는 우수한 강자성 특성을 나타내었고 8K에서 15%와 상온에서 3% 정도의 자기저항비를 나타내었다. 이 SFMO 소결체를 타겟으로하여 스퍼터링법으로와의 단결정 기판 위에 비정질 SFMO 박막을 증착한 후, 적절한 H$_2$(5%)/Ar의 환원분위기, $680^{\circ}C$ 이상) 열처리 조건의 고상결정법으로 이중 페롭스카이트 구조의 다결정 SFMO 박막을 제조하였다. 이 SFMO 박막은 강자성 특성을 잘 나타내었으나, 자기저항 특성은 상온에서는 나타나지 않았고 8K에서 약 0.3-0.5%의 자기저항비를 나타내었다. 이와같이 박막의 경우 자기저항 특성이 떨어지는 이유는 제조된 SFMO 박막이 화학양론비를 만족하지 못하고 조직의 치밀도가 떨어져서 결정립 사이에서 발생하는 자기스핀 터널링이 제대로 발생하지 못하였기 때문이라 생각되었다.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.194-199
• /
• 2011

In this study, non-stoichiometric 1-x$[(K_{0.5}Na_{0.5})_{0.97}(Nb_{0.96}Sb_{0.04})O_3]$ + x $CeMnO_3$ + 0.8 mol%CuO + 0.2 wt% $Ag_2O$ (x=0, 0.005) ceramics were prepared by a conventional mixed oxide and carbonate method, their dielectric and piezoelectric properties were investigated with the variations of sintering temperature. As $CeMnO_3$ substitution incereased, the density, piezoelectric constant($d_{33}$) and dielectric constant($\varepsilon_r$) were increased and the mechanical quality factor(Qm) was decreased. At the sintering temperature of $1100^{\circ}C$, the density, electromechanical coupling factor($k_p$), dielectric constant($\varepsilon_r$) and piezoelectric constant($d_{33}$) of 0.5mol% $CeMnO_3$ specimen showed the optimun values of 4.475 $g/cm^2$, 0.437, 552 and 166 pC/N, respectively. However, the mechanical quality factor($Q_m$) showed the minimum value of 380.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.630-634
• /
• 1999

$Al(OH)_3$와 비정질 $SiO_2$를 출발원료로 사용하여 반응소결을 통한 다공성 뮬라이트를 제조하였다. $Al(OH)_3$와 $SiO_2$의 몰비를 뮬라이트의 화학양론적 조성과 실리카와 얄루미나가 많은 조성으로 변화시키고, 각 조성에 $AlF_3$를 0, 1, 5, 10wt% 첨가하여 뮬라이트의 생성에 미치는 조성과 첨가제의 영향을 살펴보았다. 첨가한 $AlF_3$의 양이 많아질수록 낮은 온도에서 뮬라이트가 생성됨을 보였고, 첨가된 $AlF_3$의 양이 5wt%인 경우, 화학량론적 뮬라이트 조성에서 율라이트가 $1250^{\circ}C$에서부터 생성되기 시작하였으 며 $1300^{\circ}C$ 이상 열처리한 경우 충분히 발달한 침상형의 다공성 뮬라이트가 합성되었다. $AlF_3$의 양이 5wt% 이상 첨가한 경우 열 처리 온도의 영향은 크게 나타나지 않았으며, 소성체의 수축도 거의 일어냐지 않았다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.39-41
• /
• 2012

The influence of coal blending methods such as out-furnace (external or pre-mixed) blending and in-furnace (initially non-mixed) blending with different excess oxygen (highest, medium, and lowest stoichiometric conditions) on unburned carbon and NOx emissions of blend combustion in an entrained flow reactor (EFR) has been analyzed, using experimental and numerical approaches for binary coals used by Korean power plants. The results confirm that under the medium condition, contrasting processes such as reactive and un-reactive effects occur with SBRs in the out-furnace blending method. The in-furnace blending method results in an improvement in the efficiency of unburned carbon fractions and a further reduction in the NOx emission. Under the highest condition, the unburned carbon fraction in both the out-furnace and the in-furnace blending methods corresponds with the tendency under the medium condition with contrasting processes of lower magnitude, whereas the NOx emission in the highest condition increases slightly. Under the lowest conditions, the unburned carbon fraction in the out-furnace blending method gradually decreases as SBR decreases, without a competition effect. The reduction of NOx emission under the lowest conditions is more effective than those under other conditions for the two blending methods because of a homogeneous and heterogeneous NOx reduction mechanism.