• Structural Engineering and Mechanics
• /
• v.81 no.4
• /
• pp.429-441
• /
• 2022

A probabilistic assessment of the seismic-excited buildings with a multiple-tuned-mass-damper (MTMD) system is carried out in the presence of uncertainties of the structural model, MTMD system, and the stochastic model of the seismic excitations. A free search optimization procedure of the individual mass, stiffness and, damping parameters of the MTMD system based on the snap-drift cuckoo search (SDCS) optimization algorithm is proposed for the optimal design of the MTMD system. Considering a 10-story structure in three cases equipped with single tuned mass damper (STMS), 5-TMD and 10-TMD, sensitivity analyses are carried out using Sobol' indices based on the Monte Carlo simulation (MCS) method. Considering different seismic performance levels, the reliability analyses are done using MCS and kriging-based MCS methods. The results show the maximum structural responses are more affected by changes in the PGA and the stiffness coefficients of the structural floors and TMDs. The results indicate the kriging-based MCS method can estimate the accurate amount of failure probability by spending less time than the MCS. The results also show the MTMD gives a significant reduction in the structural failure probability. The effect of the MTMD on the reduction of the failure probability is remarkable in the performance levels of life safety and collapse prevention. The maximum drift of floors may be reduced for the nominal structural system by increasing the TMDs, however, the complexity of the MTMD model and increasing its corresponding uncertainty sources can be caused a slight increase in the failure probability of the structure.

• Journal of Korean Society on Water Environment
• /
• v.24 no.2
• /
• pp.239-246
• /
• 2008

In this study, an optimized deterministic water-quality model was constructed to estimate water quality of a river and lake in the upstream basin of a dam. A stochastic water-quality analysis using reliability analysis technique was applied to the model. The model was tested in the 13.9 km reach from Maeil stage station of Kyechun to Hoengsung Dam of Sum River. After finding hydraulic characteristics from nonuniform flow analysis, Broyden-Fletcher-Goldfarb-Shanno (BFGS) optimization technique for model calibration was applied to determine optimum reaction parameters, and model verification was performed based on these. The stochastic model, using Mean First­Order Second­-Moment (MFOSM) and Monte-Carlo methods, was applied to the same reach as the deterministic study. Variations of discharge and water quality in headwater were considered, as well as variations of hydraulic coefficients and reaction coefficients. The statistical results of output variables from MFOSM were similar to those from the Monte-Carlo method. Risk analysis using MFOSM and Monte-Carlo methods presented the probabilities of some locations in the Hoengsung Lake violating existing water-quality standards in terms of DO and BOD.

• Wind and Structures
• /
• v.21 no.6
• /
• pp.677-691
• /
• 2015

In this study, the geometrical setup of a turbine blade is tracked. A research-scale rotating turbine blade system is setup with a single 3-axes accelerometer mounted on one of the blades. The turbine system is rotated by a controlled motor. The tilt and rolling angles of the rotating blade under operating conditions are determined from the response measurement of the single accelerometer. Data acquisition is achieved using a prototype wireless sensing system. First, the Rodrigues' rotation formula and an optimization algorithm are used to track the blade rolling angle and pitching angles of the turbine blade system. In addition, the blade flapwise natural frequency is identified by removing the rotation-related response induced by gravity and centrifuge force. To verify the result of calculations, a covariance-driven stochastic subspace identification method (SSI-COV) is applied to the vibration measurements of the blades to determine the system natural frequencies. It is thus proven that by using a single sensor and through a series of coordinate transformations and the Rodrigues' rotation formula, the geometrical setup of the blade can be tracked and the blade flapwise vibration frequency can be determined successfully.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.287-292
• /
• 2022

In this paper, the stochastic distribution of the springback amount is investigated for the stamping process of a U-channel shaped-product with ultra-high strength steel. Using the reliability-based design optimization technique (RBDO), stochastic distribution of process parameters is considered in the analysis including material properties and process variation. Quantification of the springback scatters is carried out with the statistical analysis method according to the material strength. It is found that the scattering amount of springback decreases while the amount of springback increases as the tensile strength of the blank material increases, which is investigated by analyzing the strain and stress distribution of the punch and die shoulder. It is noted that the proposed scheme is capable of predicting and responding to the unavoidable scattering of springback in the sheet metal forming process.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.35-42
• /
• 2021

This paper presents an on-line finite element model updating method for in-service structures using measured data. Conventional updating methods, which are based on numerical optimization, are not efficient for on-line updating because they generally require repeated eigenvalue analyses until convergence criteria are met. The proposed method enables fully automated on-line finite element model updating, almost simultaneously with vibration measurement, without any user intervention or off-line procedures. The automated covariance-driven stochastic subspace identification (Cov-SSI) method is utilized to identify modal frequencies and vectors, and the identified modal data is fed to the neural network of the inverse eigenvalue function to produce the updated finite element model parameters. Numerical examples for a wind excited 20-story building structure shows that the proposed method can update the series of finite element model parameters automatically. It is also shown that sudden changes in the structural parameters can be detected and traced successfully.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.921-927
• /
• 2012

Reliability-based design optimization (RBDO) can be used to determine the reliability of a system by means of probabilistic design criteria, i.e., the possibility of failure considering stochastic features of design variables and input parameters. To assure these criteria, various reliability analysis methods have been developed. Most of these methods assume that distribution functions are continuous. However, in real problems, because real data is often discrete in form, it is important to estimate the distributions for discrete information during reliability analysis. In this study, we employ the Akaike information criterion (AIC) method for reliability analysis to determine the best estimated distribution for discrete information and we suggest an RBDO method using AIC. Mathematical and engineering examples are illustrated to verify the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.686-689
• /
• 2004

Genetic algorithm is well known for stochastic searching method in imitating natural phenomena. In recent times, studies have been conducted in improving conventional evolutionary computation speed and promoting precision. This paper presents an approach to optimize PID controller gains with the application of modified Genetic Algorithm using Support Vector Machine (SVMGA). That is, we aim to explore optimum parameters of PID controller using SVMGA. Simulation results are given to compare to those of tuning methods, based on Simple Genetic Algorithm and Ziegler-Nicholas tuning method.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.265-268
• /
• 2001

This paper proposes the strategy of noise injection into inputs in the Kohonen learning algorithm (KKA) to improve the local convergence problem of the KLA. Noise strengths are high in the begin of the learning and gradually lowered as the teaming proceeds. This strategy is a kind of stochastic relaxation (SR) method which is broadly used in the general optimization problems. It is convenient to implement and improves the convergence properties of the KLA with moderately increased computing time compared to the KLA. Experimental results for Gauss-Markov sources and real speech demonstrate that the proposed method can consistently provide better codebooks than the KLA.

• Journal of Korean Society of Transportation
• /
• v.16 no.1
• /
• pp.151-164
• /
• 1998

본 논문은 통행배정과 교통신호제어기의 결합문제를 풀기 위한 새로운 해법의 제시를 목적으로 한다. 통행배정과 신호제어 결합모형은 네트웍 디자인 문제(Network Design Problem)로 비선형 비분리 목적함수(Nonlinear and Nonseparable Objective Function)와 비선형제약 및 비컴백스 집합(Nonlinear and Non-Convex Set)형태로 인해 다수의 국지해(Multiple Local Optima)를 갖는 특징이 있다. 따라서 이렇게 복잡하고 난해한 문제를 푸는 해법은 많은 국지해중에 가장 최소한 값(Global Optima)을 찾을수 있는 방법을 제공하여야한다. 전체최적해(Global Optima)를 찾 을 수 있는 기존의 방법들은 확률적최적화방법(Stochastic Optimization Methods)에 속한다. 본연구에서는 이러한 방법중 금속공학에서 발 견된 모의담금빌법(Simulated Annealing Method)에 근거한 해법을 제시한다. 이방법이 통행배정과 신호제어 결합문제에 적용되는지 검토하기 위해 이해법의 수렴성(Convergence)을 증명했으며 또한 실제 프로그램된 모형을 작은 고안된 네트워크에 적 용했다. 마지막으로는 개발된 해법의 실용성을 실험하기 위해 두 가지의 보다 큰 도로망에 적용 및 분석을 했다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.894-899
• /
• 2000

Optimization of 26 design variables selected from suspension characteristics for Korean High Speed Train (KHST) is performed according to the minimization of 58 responses which represent running safety and ride comfort for KHST and analyzed by using the each response surface model from stochastic design experiments. Sensitivity of design variables is also analyzed through the response surface model which ineffective design prameters to the performance index are screened by using stepwise regression method. The response surface models are used for optimizing design variables through simplex algorism. Values of performance index simulated by optimized design parameters are totally lower than those by initial design parameters. It shows that this method is effective for optimizing multi-design variables to multi-object function.