• 한국의류학회지
• /
• 제28권6호
• /
• pp.776-783
• /
• 2004

The purpose of this study was to identify the reasonable gathering conditions as consider of effect of gathering and variation of silhouette made by gathering conditions. The experimental design consists of four factorial design: (1) three kinds of different weight and different thickness fabrics (2) three kinds of different stitch densities (3) five kinds of different ratio of gathers (4) three kinds of different angles. Therefore one hundred thirty five (135) samples were made. Data analysis utilize SPSS WIN 10.0 Package. The results of this study were as follows: 1. In the aspect of fabrics, it is shown the visual propriety that it is as thin as the small stitch, and as thick as the big stitch. 2. As stitch densities, it shows the different stabilized nodes. 3. In the aspect of ratio of gathers, it is shown the visual propriety that a few was small stitches, which help formations of nodes, and a lot were big stitches, which help increased the effect of gather. 4. In the aspect of angle of bias, the drape appearance was excellent as a sample of cutting by 0 angle(0$^{\circ}$) of bias. The big stitches that help formations of stabilized nodes, and a case of cutting by 45 angle(45$^{\circ}$) of bias was small stitch.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.77-86
• /
• 2004

The purpose of this study is to characterize physical and tensile properties according to a knitting method as basic materials for solving the difficulties that occur due to the fact that the crosswise elongation is most different among knit stitch at the time of measuring elongation of knitwear. The sample used for this study was wool $100\%$ and was knitted into two, that is, controlled loop length controlled to properties of structure and fixed loop length by using Shimaseiki SES-124S 12G computer automatic flat knitting machine with DSCS device. Also, the density of rib fabric was 12gauge and its quantity was a total of seven of $0{\times}0,\;1{\times}1,\;2{\times}1,\;2{\times}2,\;3{\times}3,\;4{\times}4$ and including plain fabric, and knitted 2 pieces of sample of 300 wale${\times}400$ course. In conclusion, rib stitch has the much higher stretch rate in the direction of the course than other stitches.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.213-215
• /
• 2006

Application for laser welding have increased steadily in recent years due to its benefits such as high speed, high productivity and high density energy heat source. In this article these advantages of the laser welding has been considered for Nd:YAG laser stitch welding as a substitute for spot welding of lightweight car body plates. Optimized parameters for Nd:YAG laser stitch welding have been determined comparing the economical and mechanical characteristics to match with the currently used spot welding characteristics.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.353-360
• /
• 1999

An investigation made of the variations of angle of bias on the top of the sleeve cap curve line and calculated easing contraction ratio by capheights(A ; a,h$\times$5,/6) B: A, H/4 +4cm C:A.H/3 D: A.H/ 4+3cm E:AH/4+2cm, F: A,H/4+1cm, G: A,H/4, H:A,H/6, I:A,H/8) and the efects of easing contraction on the cap curve lines of sleeve A, D, G by easing stitch density with the gathering foot: sewing condition-lockstitch industrial machine stitch density(N1.0 ; 38stitches/3cm N1.5: 26stitches/3cm, N2.0 ; 19stitches/3cm, N2.5 ; 14stitches/ 3cm) The results obtained were as follows; 1) The variations of the angle of bias on the top of the sleeve cap curve line by cap heights can be done according to the angle balance (front; $\alpha$-$\beta$ back ; $\alpha$'- $\beta$') between the angle (front ;$\alpha$, $\beta$, back ; $\alpha$'- $\beta$') of bias of the two base-lines. 2) The higher cap height the more higher the calculated easing contraction ratio. 3) The lower the stitch density the higher easing contraction ratio. 4) The effects of easing contraction was that sleeve G was more than sleeve A, D.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.629-634
• /
• 2012

Knitted fabric using acrylic/wool blended yarn (A/W) is increasingly used in the knit industry; subsequently, research on knitted fabric using A/W has increased. This study presents an scientific database from evaluating physical properties of $1{\times}1$ rib stitch using A/W. In this study,$1{\times}1$ rib stitch using A/W were made at various knitting tensions (dial no. 2-6) and the number (4-6) of ply yarn. The physical properties of $1{\times}1$ rib stitch using A/W were measured and analyzed. The density was in the range 5.5-6.4 wales/cm and 4.0-5.6 courses/cm, respectively. The density increased when less plying yarns and more knitting tension were added during knitting. The thickness was in the range of 1.592-2.362 mm and the tensile strength was in the range 32.75-53.63 Kgf/mm. The burst strength was in the range 107.8-139.2 $N/cm^2$. Thickness, tensile strength, and burst strength increased as the number of ply yarn and the knitting tension increased. The elongation and the recovery extension rate were in the range 102.29-112.13% and 96.4-97.7%, respectively. The heat retention rate was in the range 59.3-65.1%. There was no difference of the elongation and the recovery extension rate and the heat retention rate by the knitting tension and the number of the ply yarn. The permeability was in the range 170.5-396.3 $cm^3/cm^2/sec$. Air permeability decreased as the number of ply yarn and the knitting tension increased. The pilling properties were excellent for all $1{\times}1$ rib stitches.

• 한국의류학회지
• /
• 제22권1호
• /
• pp.41-48
• /
• 1998

An investigation made of the easing contraction ratio according to sewing conditions (eased seam angle; 0$^{\circ}$ 20$^{\circ}$ 30$^{\circ}$ 45$^{\circ}$ 60$^{\circ}$ 70$^{\circ}$ 90$^{\circ}$, stitch density; 38 stitches/3 cm(N1.0), 26 stitches/ 3 cm(N1.5), 19 stitches/3 cm(N2.0), 14 stitches/3 cm(N2.5), 12 stitches/3 cm(N3.0), thread; sp 60' s/2) by lockstitch industrial sewing machine with shirring foot. The results abstained were as follows: 1. The lower the stitch density , the higher the easing contraction ratio. 2. The easing contraction ratio at 0$^{\circ}$ and 90$^{\circ}$ were lower than bias angles (20$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$, 70$^{\circ}$). 3. As the results of visual test, the maximum easing conditions were Fl -0$^{\circ}$.20$^{\circ}$.30$^{\circ}$.45$^{\circ}$-12 stitches/3 cm(N3.0), 60$^{\circ}$. 70$^{\circ}$. 90$^{\circ}$-14 stitches/3 cm(N2.5), F2 -0$^{\circ}$. 20$^{\circ}$.30$^{\circ}$.60$^{\circ}$.70$^{\circ}$.90$^{\circ}$-19 stitches/ 3 cm(N2.0), 45$^{\circ}$ -14 stitches/3 cm(N2.5), and F3 -0$^{\circ}$.20$^{\circ}$.30$^{\circ}$.45$^{\circ}$.60$^{\circ}$.70$^{\circ}$.90$^{\circ}$-19 stitches/3 cm (N2.0). 4. Approximately easing contraction ratio was obtained as 2.0% (N1.0)~ 10.2% (N3.0) in F1, 6.7% (N1.0)~ 15.7% (N2.0) in F2, and 5.2% (N1.0)~ 12.1% (N2.0) in F3, according to different angles on the sleeve cap curve line. 5. As a resets of SPSS PC) statistics analysis, it confirmed the relations which were observed between easing contration ratio and stitch density, and easing contraction ratio was correlated with bending properties.

• 한국의상디자인학회지
• /
• 제14권1호
• /
• pp.111-121
• /
• 2012

This study focused on the plane and side drape coefficients of weft knitted fabrics as a function of knit structure, stitch density, and stiffness. Fifteen weft knitted fabrics are produced with five different structures (interlock, single pique, royal interlock, cross miss interlock, and mock royal interlock) and three different gauges (7G, 10G, and 12G). Five knit structures were the application of knit, tuck, and miss stitch on the basis of interlock of the double knit fabric For this purpose, three-dimensional shapes of the draped sample were obtained by using a drapability tester which can record the contour line coordinates of a projected plane drape. Then, projected shapes of the plane and side drape were derived from those three-dimensional ones to review the relationship between plane drape coefficients and side ones. It was found that the theoretical values of plane and side drape coefficients depending on the change of deflection angles fit to their experimental ones. A5 a result of a regression analysis of the relationship between plane and side drape coefficients, the relationship could be expressed as $y=0.5838x-0.0065x^2+9.03{\times}10^{-5}x^3$. In case of mean of drape coefficient, it was increased according to the rule of that the more tuck and miss stitch overlap. A high degree of correlation was found between stiffness and drape coefficient. The regression equation of drape coefficient($y$) can be represented by $y=y=\sqrt[3]{Stiffness}-10.72$.

• 한국의류산업학회지
• /
• 제23권1호
• /
• pp.129-141
• /
• 2021

This study investigated fabrics, washing and cares, design, pattern, subsidiary materials, and sewing methods with a focus on the functional outers using moisture-permeable waterproof fabric as a shell; in addition, each element was analyzed for differences depending on fabric type. The characteristics of 34 outers were investigated through labels, online product introductions, visual inspection, observations from two experts with more than 30 years experience and wear tests. Moisture-permeable waterproof fabrics used for the outer were classified into two types; in addition, the shell of the high-density fabric and the 2 & 3-layer fabrics had different characteristics. Various fabrics, detailed designs, and three-dimensional patterns suitable for each part of the human body were used to improve functionality. In addition, various subsidiary materials and sewing methods were used to form an organic relationship. The same washing and cares, patterns and subsidiary materials were used regardless of fabric type; however, the fabric type influenced the detailed design and sewing. The outers with high-density fabric had a loose fit, short placket, e-banded cuffs, lock-stitch, and lock-stitch+binding. However, the outer with 2 & 3 layer fabric had a slim fit, hood width adjustment, zippered pockets, cuffs with tab, seamless adhesive sewing such as laminating, lock-stitch+ seam-sealing, and welding.

• 한국의상디자인학회지
• /
• 제24권2호
• /
• pp.1-10
• /
• 2022

The purpose of this study is to analyze the structural properties of 100% wool fabrics knitted with various stitch types and to evaluate dimensional stability from shrinkage in wet cleaning and drying. Materials were weft-knitted from twenty-four different stitches with 7 gauge using a computerized flatbed knitting machine. Weight, thickness, density, and length were measured. A domestic washing machine and a tumble dryer were used for the shrinkage test. The results are as follows: Knitted fabrics were divided into 3 groups based on weight per unit area. Porous knits show light weight whilst milano, pintuck, rib stitches belong to the heaviest group. A positive correlation between weight and thickness was found and the same result was obtained for wale density and weight. Dimensional shrinkage of knitted fabrics was increased during repetitive wet cleaning and drying regardless of knit stitches. Especially, fabrics knitted with float, tuck, cable, and links & links stitches samples were contracted more than 15% in the first treatment whereas 2x1 rib stitch showed 1% shrinkage rate. Fisherman and milano stitches contracted in both course and wale direction with similar shrinkage rates. However, porous knits with float and tuck stitches shrank in course direction by 20% as well as cable samples contracted from 5% to 20% after repeated washing and drying. On the other hand, 30% and 15% contraction of wale direction occurred in orderly float and links & links stitches, respectively. Machine dried knits have a higher shrinkage rate than air-dried knits, but the drying method did not affect to the direction of contraction. In conclusion, variations of knit, tuck, and float stitches affect knit construction and dimensional stability from shrinkage in wet cleaning and drying of wool knitted fabrics.

• 한국의류학회지
• /
• 제30권6호
• /
• pp.870-879
• /
• 2006

In this study, the difference in the mechanical properties of silver and cotton weft knitted fabrics was studied. Six silver fabrics for the summer ladies' knit outwear were knitted varying knit structure and fabric density. Two commercial cotton knitted fabrics were selected to compare the properties. subjective sensation of hand of the fabrics was also studied. Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(THV) was carried out according to the KW-304 Summer. The result of the research show that silver weft knitted fabrics had lower LT, RT, G, 2HG and higher EM, W, LC, WC, RC than cotton weft knitted fabrics. The use of silver yam contributed to increase in surface roughness of knitted fabrics. As the silver knitted fabrics became thicker compressional energy increased. The use of silver yarns contributed to much better fabric handle compared with the use of cotton yam only. It appeared that coefficient of friction of tuck stitch was larger than that of plain and interlock stitch. KOSHI and FUKURAMI values of the tuck samples were significantly higher than those values of the plain and interlock samples, while SHARI values were low in general. The total hand value of tuck stitch was higher than those of interlock and plain stitch.