• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.77-86
• /
• 2004

The purpose of this study is to characterize physical and tensile properties according to a knitting method as basic materials for solving the difficulties that occur due to the fact that the crosswise elongation is most different among knit stitch at the time of measuring elongation of knitwear. The sample used for this study was wool $100\%$ and was knitted into two, that is, controlled loop length controlled to properties of structure and fixed loop length by using Shimaseiki SES-124S 12G computer automatic flat knitting machine with DSCS device. Also, the density of rib fabric was 12gauge and its quantity was a total of seven of $0{\times}0,\;1{\times}1,\;2{\times}1,\;2{\times}2,\;3{\times}3,\;4{\times}4$ and including plain fabric, and knitted 2 pieces of sample of 300 wale${\times}400$ course. In conclusion, rib stitch has the much higher stretch rate in the direction of the course than other stitches.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.213-215
• /
• 2006

Application for laser welding have increased steadily in recent years due to its benefits such as high speed, high productivity and high density energy heat source. In this article these advantages of the laser welding has been considered for Nd:YAG laser stitch welding as a substitute for spot welding of lightweight car body plates. Optimized parameters for Nd:YAG laser stitch welding have been determined comparing the economical and mechanical characteristics to match with the currently used spot welding characteristics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.150-150
• /
• 2003

• 복식문화연구
• /
• 제19권2호
• /
• pp.334-345
• /
• 2011

A study on compressive garments guarantee the required pressure and form depending on the type of disease and the state of injury can be used in the preventive treatment of cardiovascular disease. This research is to provide a preliminary data to develop medical clothing products, especially knitted compression garments. Starting from analyzing knitted structure of imported pressure goods to apply to test samples, 11 kinds of knitted stretchy fabrics were manufactured under the various knitting conditions, then their tensile, mechanical and hand properties were measured. In comparison size changes by knitting structure, tuck stitch applied structure showed an increase in course direction and decrease in wale direction. Float stitch applied structure indicated the contraction of size in width because of unformed loops and floated yarn on the technical back of fabric. As a result of tensile properties in tuck and float applied structure, tensile strength was increased in the course direction. On the other hand, the more loops overlapped due to the tuck and float stitch, the more decreased their elongation and elastic recovery were. In case of mechanical properties, as the tuck and float stitch were overlapped double or triple the bending and shearing properties were risen. Accordingly, the drape of fabric becomes stiff, and its surface becomes rough and uneven. The measurements of hand properties showed that the value of KOSHI, FUKURAMI NUMERI in tuck and float applied structure are higher than the plain structure. This results from the relationship between the mechanical and hand properties.

• 복식
• /
• 제59권3호
• /
• pp.82-95
• /
• 2009

The kind and the use of the fabrics for crown manufacture in the Baekje period has been studied by characterizing the imprinted fabrics on the crowns and the diadem ornaments from the old tomb. The contact region with the skin inside of the crown and the region between the bark of white birch and the gilt bronze openwork plates contained fabrics. The fabrics used in the gilt-bronze crown were all plain weave silk except that of Yongwonri tomb where loosely woven thin tabby was used. There have been 4-types of iron framed diadem of the Baekje, which comprise the inverted triangle-shaped diadem only with iron frame, the diadem with gold plate ornament in the iron frame, the diadem decorated with mica plate and gold plate, and the diadem with silver ornament in the iron frame. The fabrics used in the triangle shaped iron frame diadem include plain weave silk, irregular plain woven silk, thin tabby, complex silk gauze, twill weave on plain ground, and warp-faced compound weave. The iron frames were wrapped with the fabrics from one layer up to three layers, and the iron diadem was covered with one later of loosely woven textile such as irregular plain woven silk, thin tabby, and complex silk gauze. But in case of decorating the iron diadem with gold Plate ornaments, multiple layers of fabric were used to sustain the weight of the ornaments. The fabrics in the iron diadem frame were sewed with running stitch, overedge stitch or hemming stitch, diagonal hemming stitch, half back stitch), and overcast stitch.

• 한국의류학회지
• /
• 제32권12호
• /
• pp.1981-1989
• /
• 2008

개개인은 다른 이유를 가지고 동일한 또는 유사한 제품들을 구매한다. 추구 효익이란 동일한 속성에 동일한 상대적 중요성의 수준을 가지는 사람들을 군집하여 이러한 차이를 이해하려는 것이다. 본 연구에서는 니트 소재의 구성특성에 대한 추구 효익에 따라 소비자들을 세분화하고, 컨조인트 분석을 이용하여 선호도에 대한 구성특성들의 상대적 중요성을 비교 분석하여 세분화 집단에 따른 선호도에 유의한 차이가 있는지 분석하였다. 효용도에 따라서 양모 섬유를 선호하는 집단, 아크릴 섬유를 선호하는 집단과 긴 편환장을 선호하는 집단, 세개의 군집이 도출되었으며, 이들은 다른 구성특성의 이상적인 니트 소재를 선호하는 것으로 나타났다. 군집들 간에 니트 소재의 혼용률과 편환장에 대한 선호도에 유의한 차이가 있는 것으로 나타났다. 양모 섬유를 선호하는 집단은 양모 혼용률이 크고 짧은 편환장을 선호하였으며, 아크릴 섬유를 선호하는 집단과 긴 편환장을 선호하는 집단은 아크릴 혼용률이 크고 긴 편환장을 선호하였다.

• 한국의류학회지
• /
• 제31권11호
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• 감성과학
• /
• 제25권4호
• /
• pp.119-128
• /
• 2022

본 연구의 목적은 웨어러블 에너지 하베스팅의 전도사를 통한 효율적인 전력 전달을 위해 전도사 자수 스트치 회로에서 각도와 굽힘의 개수가 저항에 미치는 영향을 분석하고 실제 태양광 패널과의 연결을 통해 손실 전력의 변화를 연구하는 것이다. 본 연구에서는 전도사 스티치 회로의 각도를 30˚부터 180˚까지 30˚단위로 설계하였으며 저항의 측정은 analog discovery2 장비를 활용하여 측정한다. 측정한 저항값을 분석하여 저항값이 급격히 변화하는 각도의 구간에서는 5˚단위로 다시 측정하여 분석한다. 이후 분석 결과를 토대로 전도사에 가해지는 장력이 수렴하는 각도를 분석하고 해당 각도에서 스티치의 굽힘 개수를 달리하여 다시 저항을 측정한다. 스티치의 각도가 줄어들수록, 굽힘의 개수가 늘어날수록 저항은 줄어듦을 확인하고 연구결과를 토대로 스티치로 인한 손실 전력을 계산한 결과 전도사 자수 스티치가 일반적인 자수에 비해 1.61배의 손실 전력을 줄일 수 있음을 고찰한다. 이러한 결과는 웨어러블 에너지 하베스팅의 전도사를 통한 전달에서 자수의 스티치가 전력 전달에 중요한 영향을 미치는 것을 시사한다. 본 연구결과를 기반으로 후속 연구에서는 곡선 형태의 스티치, 전도사의 개수 등 다양한 형태의 스티치를 비교 분석하여 웨어러블 에너지 하베스팅이 보다 효율적으로 생산 후 저장될 수 있도록 하는 전도사 회로 설계 기술을 개발하고자 한다.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.457-463
• /
• 2018

This study examined the water absorption and drying properties of the thirteen types of the knitted fabrics for sports wear. These physical properties were analysed with relation to the constituent fiber cross-sectional shape and structure parameters of the knitted fabrics by regression analysis. Absorption and drying properties of the knitted fabric specimens were increased with increasing the porosity of the constituent yarns, which was attributed to the capillary channels in the yarns. The water absorption and drying properties were increased and decreased with increasing tightness factor and stitch density of the knitted fabric. The absorption property of the knitted fabric for perspiration absorption and fast dry sport-wear clothing was mostly influenced mostly by fiber cross-sectional shape and its characteristics, whereas, drying property was dependent on the structural parameters of the knitted fabric such as tightness factor and stitch density. Therefore, superior perspiration absorption and fast drying knitted fabric could be obtained in the fabric structure with optimum tightness factor and stitch density, and constituent yarn structure with non-circular fiber crosssection and high porosity. GATS method and MMT method are used to measure sweating fast drying properties and it is necessary to carry out studies using these measurement methods in order to compare with the results of this study.

• 한국가구학회지
• /
• 제27권1호
• /
• pp.49-58
• /
• 2016

In modern society, designers started feeling moral and social responsibility in the aspect of environment as a position of suggesting something new. Rather than creating another waste to make something innovative, the concept of Upcycling which is about adding design or utilization to the existing recyclable materials to raise their value to products or art works has started settling down. Among them, there have been various researches on the use of offcut waste to be dumped. Such use of waste can be found in Jogakbo (patchwork), one of our traditional boudoir crafts. This could be connected to the concept of the modern Upcycling in the aspect of giving new values to the wasted pieces of fabric through needlework. Therefore, this study suggested Stitch work as new Upcycling furniture by seeking for the common connections between Upcycling and traditional Jogakbo, and then reinterpreting them in the same viewpoint. It was an opportunity not only to rediscover 'the esthetics of waste' by changing the awareness of 'behavior of dumping', but also to reinterpret or reconsider the tradition. Based on this, it is expected to continuously have new attempts to use offcut waste for eco-friendly design in the future, and also to have opportunities to seek for new directions of Upcycling to rediscover new values through the revaluation of valuelessness.