• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.189-192
• /
• 2008

콘크리트 교량에서 수행되는 기존 점검방법은 점검자가 현장에서 교량의 외관상태를 기록한 다음 내업을 통해서 수작업으로 외관조사망도를 작성하는 과정으로 진행된다. 하지만, 열악한 현장작업 여건으로 인해 획득되는 데이터는 객관성과 신뢰도가 떨어진다는 문제점이 있다. 본 연구에서는 이러한 문제점을 개선하기 위하여 외관조사결과를 자동으로 추출하는 이미지 처리 프로그램을 개발하였다. 이 프로그램은 교량으로부터 획득한 디지털 이미지를 처리하고 분석하며, 결과의 입출력 및 관리하는 데까지의 모든 관련 프로그램을 통칭한다. 프로그램 개발을 위하여 디지털 이미지의 크기와 카메라 배율간의 관계 분석, 균열 분석 알고리즘 개발, 이미지의 해상도 및 정밀도 분석 등의 연구가 수행되었다. 최초 계획에서는 이미지 처리를 통하여 균열망도를 자동으로 구현하도록 설계하였지만, 데이터의 용량과 이미지 처리의 기술적인 한계 그리고 콘크리트 표면의 여러 가지 조건에 등에 따라 결과의 신뢰도가 많이 차이가 난다는 것을 확인하였다. 따라서 결과를 정확하게 추출하기 위하여 자동판독 프로그램을 근간으로 하면서 사용자에 의해 수정작업이 가능하도록 프로그램을 보완하였다.

• 가정∙방문간호학회지
• /
• 제8권1호
• /
• pp.38-49
• /
• 2001

The purpose of this study was to evaluate the self care focused home nursing' care outcomes of parturient women following Cesarean sections, The subjects included 56 parturient women following a cesarean section, and they were randomly assigned to an experimental group or a control group, The experimental group included women who were discharged early from the hospital. 4-5 days after having a cesarean section. Home nursing care for the experimental group consisted of stitch removal. wound care and education for parturient women. Home nursing care was provided for 2-3 days after early discharge. The outcomes of self care focused home nursing care were measured by self-care competency. Data collection was done by a self-reported questionnaire and by a telephone interview 2-3 days after discharge from the hospital(control) or after home care (experimental) from December, 20, 1998 to June, 10, 1999. The questionnaire consisted of 25 items on 9 self-care domains. Data was analyzed by a t-test. and as $x^2$-test. The study results were as follows: 1. The general characteristics of both groups were similar except for the total number of pregnancies, and whether or not they wanted the pregnancy at this time. 2. The self-care competency scores for the experimental group receiving self care focused home nursing care were higher than the scores for the control group(t=2.361. $p{\le}.05$). 3. There was no significant difference in the rate of OPD visiting, readmission, or emergency room use between the two groups. We concluded that self care focused home nursing care is effective in promoting the self-care competency of parturient women following Cesarean sections. It is suggested that further study is needed with a larger sample to be able to generalize these results.

• 복식
• /
• 제63권5호
• /
• pp.72-86
• /
• 2013

This research aims to analyze the expressive characteristics of the fashion illustration in various fashion products such as clothing, accessories, other fashion products, and magazine advertisements. Targeting 223 items of products that had adjoined fashion illustration from 2000 to 2008, which had been collected through from magazines and web sites using the fashion illustration expression categorization (expression technique drawing style, body expression, expression image, attaching method to product) based on the theoretical background and the general trends by products. In frequency analysis results, painting technique and graphic technique were of great importance in the expression technique, and shading drawing and contour drawing were of great importance over all product groups for the drawing style. In body expression, exaggerative expression was the highest; simple expression and realistic expression were of great importance over all product groups relatively. In particular, there was a very distinct difference by fashion products in expression image. Humor image has the most importance in fashion clothing and fashion accessories. Casual image is the most important in magazine advertisements, and feminine image is the most important for other fashion products. Lastly, in attaching method to products, finished goods printings made up the largest proportion over all products. In fashion clothing, textile printings was the highest in proportions. Stitch in fashion accessory, the original form of commodity in other fashion products. This study will become a very valuable source in fashion products development using fashion illustrations.

• 치위생과학회지
• /
• 제20권1호
• /
• pp.34-43
• /
• 2020

Background: The number and curriculum of dental hygienists in Korea have dramatically increased. Controversies have since resulted from insufficient job descriptions of the work performed by a dental hygienist. A dentist's perception was examined to legally reflect the actual work of dental hygienists. Methods: Four hundred and nineteen dentists were surveyed about the duties of a dental hygienist. Their views on the career and availability of each job were examined. The duties of the dental hygienist include 13 items in dental treatment preparation, 14 items of radiography, 21 items of preventive dentistry, 6 items of periodontal treatment, 12 items of oral medicine, 12 items of conservative dentistry, 8 items of prosthetics, 10 items of orthodontics, 7 items of oral and maxillofacial surgery, 6 items of implantation, 6 items of impression taking and model fabrication, 5 items of anesthesia and injection, 11 items of management and administrative, and 3 items of self-development. Results: Most of the duties were doable by a dental hygienist. Many dentists reported that managing implants, oral hygiene of special patients, some duties in oral medicine, teeth brightening, making temporary crowns, making individual trays, selecting shades, ligaturing, and precision impressions need ≥3 years of experience. Duties perceived by dentists not to be performed by dental hygienists were reading radiographs (55.4%), suture and stitch out (48.0%), intramuscular injection (36.0%), root planning (27.2%), cementation and removal of prostheses (23.2%), and examining pulp vitality (22.0%). Conclusion: Current laws are to be revised to include, the care provided by dental hygienists and under a physician's supervision. Flexibility is also needed to cope with rapidly changing dental technology.

• 패션비즈니스
• /
• 제16권2호
• /
• pp.151-162
• /
• 2012

The industry-wide development of digital technologies has also affected the textile and fashion industries immensely. The applications of 3D technology, virtual reality, and/or augmented reality systems have helped to create novel fashion brands based on the marriage of IT and textile/fashion industries. 3D digital virtual clothing systems have been developed to help the textile and fashion industries in terms of the planning, manufacturing, marketing and sales sectors. So far, most of the development effort for the 3d virtual clothing systems has been focused on the woven fabrics. The characteristics of woven fabrics differ from those of knitted fabric. Since the physical structures and mechanical properties of the knitted fabrics are definitely different from those of woven fabrics, the simulation process for the knitted fabrics should follow different approaches. The loops in a knitted fabric deform easily. The deformation results in a readily stretchable fabric appearance. Cloth simulation mostly employs models that approximate the mechanical properties of linear elastic planes. This simulation scheme does not, however, describe well enough the behavior of knitted fabrics, which deviate largely from the linear isotropic material characteristics. This study aims at characterizing the tensile deformation and surface textures of a knitted fabric product. Tensile deformation curves for the wale, course, and bias direction are analyzed. The surface texture of the knitted fabric is analyzed by using a 3-dimensional scanning device.

• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.125-138
• /
• 2008

For physical and hand property evaluation of fabrics, the knitted fabrics from 11 types of machines knitting fancy yarns, boucle (M1), knot (M2), snarl (M3), and slub (M4), tamtam (M5), tubular (M6), fur 1 (M7), bead (M8), fur 2 (M9), fur 3 (M10), and ladder (M11) yarns, were prepared with 7-10 G plain stitch. Washing test and pilling test had also been carried out. For hand properties by objective sensibility evaluation, 17 items of sir mechanical properties using KES-FB (Kawabata Evaluation System) had been measured. Then hand values of knitted fabrics were calculated with a calculation formula, namely KN-402-KT. Finally the total hand values were obtained through KN-301-WINTER. As a result of physical properties and objective evaluation for machines knitting fancy fabrics, most of them shrank in the direction of wale and course after the washing test, in which their shrinkage rate had a maximum of 3.5%. Therefore, the washing test indicated that the shrinkage ratio of knitted fabrics had a minor change. The results of the pilling test are mostly 4-5th grade, and all of the machines knitting fancy fabrics showed good results in the pilling resistance. In hand properties and objective sensibility evaluation, twisted fancy yarns, such as boucle (M1), knot (M2), snarl (M3), and slub (M4), were superior to bonding rigidity (B) and shear rigidity (G). The surface property between course and wale differs in all samples and course direction is tougher than wale direction. FUKURAMI (fullness and softness) of all samples have high values, besides NUMERI (smoothness) of tamtam (M5) and boucle (M1), which were rather good. Most samples except fur 1 (M7) had low KOSHI (stiffness) value. The total hand value (THV) of twisted yarns was low. This study proves that manufacturers, who plan knitting yarn products and knit fashion, can apply these data to develop machines knitting yarns and knits that fit the consumers' demands.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권1호
• /
• pp.22-33
• /
• 2005

본 논문에서는 얼굴 형태와 유사한 타원체형 모델의 가변적 블록크기를 기반으로 하는 영상정렬 알고리즘을 제안한다. 블록정합 수행 시 좌우 곡률만을 고려한 기존의 실린더형 원형모델 방법은 좌우 영상에 대하여 정확한 정렬을 수행하지만 상하 영상에 대해서는 사람의 두상모양이나 턱 구조의 특징을 반영하지 않았기 때문에 정렬오류가 발생한다. 본 논문에서 제안한 알고리즘은 타원체형 얼굴 모델의 상하 좌우의 곡률에 따라 가변적인 블록크기를 사용하는 블록정합 알고리즘으로서 영상의 상관관계를 이용하여 정확한 정렬을 할 수 있다. 그리고 정렬된 영상으로부터 얼굴 텍스쳐 영상을 생성하기 위하여 영상 모자익 기법을 사용한다. 이때 중첩된 영역에 따라 선형적인 가중치를 부여하여 영상을 스티칭하고 부분적으로 나타나는 고스트 효과를 제거함으로써 더 실감 있는 텍스쳐를 생성한다.

• 방송공학회논문지
• /
• 제24권6호
• /
• pp.992-1001
• /
• 2019

다수의 카메라를 이용하여 취득된 영상을 정합 하여 하나의 넓은 시야각을 가지는 영상을 합성하는 기술이 많은 영역에서 사용되고 있다. 영상의 정합 영역 내에 이동 객체가 등장한 경우 객체의 왜곡 없이 영상을 정합 하기 위하여 움직임 정보를 이용하는 시접선 추정 방법을 제안한다. 기존 시접선 추정 기반 기술들은 영상 외곽선 정보와 시차 등을 이용하여 에너지 함수를 형성하고 시접선을 추정하는 방법을 사용하여 왔으나, 본 논문에서는 프레임 별 외곽선 정보를 이용하여 움직임 정보를 계산하고, 이를 에너지 함수에 반영하여 영상 정합 시 이동 객체의 왜곡을 방지하는 시접선 추정 기술을 제안한다. 또한, 정합 영상의 왜곡 정도를 정량화 할 수 있는 지표를 제안하여 기존 기술과 제안된 방법의 성능 차이를 검증한다.

• Parasites, Hosts and Diseases
• /
• 제58권4호
• /
• pp.403-411
• /
• 2020

Adult ascarid worms from the field mice, Apodemus agrarius, were observed with a light and scanning electron microscope, and molecularly analized with 18S rRNA gene. In the scanning electron microscope, 3 prominent labia were present in the anterior end of male and female worms, but the interlabia and gubernaculum were absent. Scanning electron micrographs showed cervical alae as vestigial organs that looked like a slightly uplifted superficial sewing stitch. Total 6 pairs of post-cloacal papillae were observed on the tail of the male worms. The tail of female worms was blunt and conical shape with a spine-like structure, mucron. The eggs were sub-globular, coated with the albuminous layer and 73 by 82 ㎛ in average size. The superficial pits of T. apodemi egg (mean 8.6×6.7 ㎛) are obviously bigger than those of Toxocara spp. The partial sequence of 18S rRNA showed the sequence homology of Toxocara canis (99.6%), Toxocara cati (99.4%), Toxascaris leonina (99.4%), and Toxocara vitulorum (99.2%). Conclusively, it was confirmed that ascarid nematodes, Toxocara apodemi, recovered from striped field mice in Korea are taxonomically conspecific relationship with genus Toxocara and genetic divergence from other Toxocara species.

• 패션비즈니스
• /
• 제12권3호
• /
• pp.116-135
• /
• 2008

To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer's dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.