• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.247-248
• /
• 2006

In this study, the morphology of the change of primary Al phase in A356 alloy by two kinds of electromagnetic stirrers(vertical and horizontal) were investigated to obtain the globular structure. The effects of the stirring current, the stirring time and the pouring temperature were determined. The greater stirring current and longer stirring time were to get the finer the Al phase. However, over a certain stirring current and stirring time, the primary Al was merged together and was increased. The reason is the degree of breakdown of initial dendrites has been decreased by the collision and coalescence of particles with increasing stirring current and stirring time. The optimum conditions and difference of the two kinds of electromagnetic stirrers have been investigated for rheology forming with controlled solid fraction.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.463-466
• /
• 2005

The microstructure and mechanical properties of rheocast A356 aluminum alloy by electromagnetic stirring are studied. In the electromagnetic stirring, main parameters are stirring current and stirring time. Stirring current is ranged from 0 A to 60 A, and stirring time is 20, 40, and 60 sec. In the rheocasting, injection velocity and applied pressure are changed. In this paper, the effect of stirring current and stirring time on the morphology and mechanical properties are investigated and analyzed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.350-353
• /
• 2005

Microstructures according to experimental conditions (pouring temperature, stirring current and stirring time) and hardness according to aging time were investigated for A356 cast aluminum alloy and 7075 wrought aluminum alloy. In pouring temperature control, grains became larger and non-uniform at high temperature, however dendritic shapes were shown at lower temperature. In stirring current control, dendritic grains were not destroyed enough at lower current, however fine grains were agglomerated at higher current. And, in stirring time control, grains were more globular but grew larger and larger with the stirring time increasing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.111-114
• /
• 2004

It is many devices to obtain the globular structure because the globularity of the structure is the key to the low apparent viscosity and also to good rheological properties. In this study, the morphology of the change of primary Al phase in A356 alloy by electro magnetic stirrer was investigated to obtain the globular structure. The parameters are the current, stirring time, pouring temperature individually. The greater current and longer stirring time was to get the finer the primary however in case of over the 80A of current and 60sec of stirring time, the primary Al was merged together and was increased. The effect of pouring temperature has an important effect on the size of primary phase. About the $675^{\circ}C$, the primary Al was very fined.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.135-138
• /
• 2007

A semi-solid forming processing has been developed for manufacturing near net-shape components. The semi-solid forming has two methods. One is thixo-forming with reheating prepared billet, the other is rheo- forming with cooled melt until semi-solid state. In indirect forging processing, this experiment used aluminum rheology materials by electromagnetic stirring system. Rheology material is made by A16061. An experiment has variation factors which are pressure, solid-fraction, stirring current and stirring time. Forged samples are found microstructures and mechanical properties. Forged samples are accomplished heat treatment T6 for high mechanical properties.

• 소성∙가공
• /
• 제16권6호
• /
• pp.443-446
• /
• 2007

The semi-solid process has been developed near net-shape components for kinds of methods. Thixo-forming with reheating prepared billet and rheo-forming with cooled melt until semi-solid state. Material is applied electromagnetic stirring system to slurry with aluminum 6061 alloy. An experiment has variation factors which are pressure, solid-fraction, stirring current and stirring time. The mechanical properties are compared to forge sample with to apply heat treatment T6. This study is researched function a virtual pressure and fine shape zone. Optimum pressure is found to prevent defect of porosity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.660-663
• /
• 2004

Recently in the automotive industries, light and high quality material is strongly required because of emissions regulation issues. In the electromagnetic stirring process, it has many merits that are the exact control ability about material processing and a good point of the protection of environment. In this paper, the morphology of the change of primary Al phase in A356 alloy by electro magnetic stirrer was investigated to obtain the globular structure. The parameters are the current, stirring time, pouring temperature and cooling rate of different wall thickness; 5mm, 15mm, 25mm respectively. By proper selection of the processing parameters, globular primary particles can be obtained by electromagnetic stirrer.

• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.1-6
• /
• 1999

This study was carried out to investigate the effect of a scouring machine including an ultrasonic system on desizing and scouring polyester fabrics. The ultrasonic frequency of the improved machine showed up at 28.882 kHz. Frequency amplitude increased with the current and the bath temperature, and then showed a constant level. Scouring effect of the ultrasonic machine was better than that of the conventional scouring machine using the mechanical stirring. The ultrasonic machine showed the optimum scouring effect at $50^\circ{C}$ of bath temperature and 10 min. of operation time, as compared to the conventional machine that required operating conditions of high temperature at $90^\circ{C}$, stirring speed at 40 rpm, and stirring time for 15 min..

• 한국해양학회지:바다
• /
• 제16권4호
• /
• pp.155-168
• /
• 2011

여름철 황해 동부 연안 저층에 형성되는 수온전선을 따라 북쪽으로 흐르는 연안 경계류의 크기와 위치에 영향을 주는 요소들을 3차원 수치모형인 ROMS를 이용하여 살펴보았다. 여름에 수심이 깊은 외해에서는 태양 가열로 강한 성층에 존재하지만 수심이 얕은 연안에서는 조류가 일으키는 저층 혼합으로 해수물성이 연직으로 잘 혼합된다. 이 과정에서 성층화된 외해와 연직 혼합이 잘되고 수온이 높은 연안 사이에서 수온전선이 형성되며, 수온전선을 가로 지르는 방향의 밀도 구배에 의해 수온전선을 따라 북쪽으로 흐르는 연안 경계류가 발생함을 확인하였다. 해류계를 이용한 현장 관측에서도 약 10 cm/s로 북상하는 연안 경계류가 관측되었다. 이러한 수온전선을 따라 북쪽으로 흐르는 연안 경계류는 주로 조류와 바람의 영향을 크게 받는다. 조류에 의한 저층 혼합과 바람에 의한 표층 혼합이 여름철 황해 동부 경계류에 가장 큰 영향을 주는 요소다. 바람에 의한 표층 혼합은 북쪽으로 흐르는 황해 동부 연안 경계류의 폭을 더 넓게 하여 수송량을 증가시킨다. 강물의 유입과 일사량의 변화는 연안 경계류의 세기와 위치 변화에 큰 영향을 주지 않는다. 성층이 강하게 이루어지는 여름철 황해 동부 연안 $36^{\circ}N$에서는 대조기(소조기) 동안 강한(약한) 조류가 북쪽으로 흐르는 해류의 수송량을 증가(감소)시키지만, 동안 경계류의 위치를 크게 변화시키지는 않는다. 연안 경계류의 평균적인 위치는 바람의 세기 변화에 따라 변화하였다.

• 한국표면공학회지
• /
• 제53권1호
• /
• pp.15-21
• /
• 2020

In this study, growth and burning behavior of 6061 aluminum alloy was studied under constant anodic voltages at various temperatures and magnetic stirring rates in 20% sulfuric acid solution by analysing I-t curves, measuring thickness and hardness of aluminum anodic oxide (AAO) films, observations of surface and cross-sectional images of AAO films. AAO films were grown continuously at lower voltages than 18.5V but burning occurred when a voltage more than 19V was applied in 20% H₂SO₄ solution at 20±0.5℃ and 200 rpm of magnetic stirring. The burning was always related with an extremely large increase of anodic current density with anodizing time, suggesting that high heat generation during anodizing causes deteriorations of AAO films by chemical reaction with acidic solutions. The burning resulted in decreases of film thickness and hardness, surface color brightened and formation of porous defects in the AAO films. The burning voltage was found to decrease with increasing solution temperature and decreasing magnetic stirring rate. The decreased burning voltages seem to be closely related with increased chemical reactions between AAO films and hydrogen ions.