• Computers and Concrete
• /
• 제29권4호
• /
• pp.209-217
• /
• 2022

In order to analyze the static and dynamic structural characteristics of the Obermeyer gate under overflow conditions, the force characteristics and vibration characteristics of the shield plate structure are studied based on the fluid-solid coupling theory. In this paper, the effects of the flow rate, airbag pressure and overflow water level on the structural performance of shield plate of air shield dam are explored through the method of controlling variables. The results show that the maximum equivalent stress and total deformation of the shield plate decrease first and then increase with the flow velocity. In addition, they are positively correlated with the airbag pressure. What's more, we find that the maximum equivalent stress of the shield plate decreases first and then increases with the overflow water level, and the total deformation of the shield plate decreases with the overflow water level. What's more importantly, the natural frequency of the shield structure of the Obermeyer gate is concentrated at 50 Hz and 100 Hz, so there is still the possibility of resonance. Once the resonance occurs, the free edge of the shield vibrates back and forth. This work may provide a theoretical reference for the safe and stable operation of the shield of the Obermeyer gate.

• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.613-619
• /
• 2017

최근의 초대형 컨테이너선들은 점차 거대화되고 있으며, 흘수의 증가로 인한 연안해역 및 항만 등과 같은 저수심 수역에서의 안전항해에 많은 주의가 필요하다. 이러한 저수심 해역을 항행하는 초대형 컨테이너선은 정수중 뿐만 아니라 파랑중에서의 선박 운동 특성을 파악하여야 할 필요가 있다. 저수심 해역에서는 특히 선박의 상하운동에 의한 스쿼트 현상이 안전 항해의 중요한 평가 요소가 될 수 있으며, 수평방향으로 작용하는 파표류력은 선박의 조종성능에 미치는 영향이 매우 크다고 할 수 있다. 본 연구에서는 저수심 해역을 항행하는 초대형 컨테이너선을 대상으로 선박에 수직방향으로 작용하는 파랑강제력과 수평방향으로 작용하는 파표류력에 대하여 전산유체역학에 의한 수치시뮬레이션을 실시하였다. 그 결과 천수역에서 정수중 전저항 값이 큰 폭으로 증가하고 있는 것을 알 수 있었다. 파랑중 단파장 영역보다는 장파장 영역이 될수록 수심과 관계없이 파표류력은 작아지고 있는 모습을 보여주고 있다. 또한 파랑강제력은 천수역에서 다른 수심의 유체력 값에 비해 상당히 크게 작용하고 있는 것을 확인할 수 있었다. 그리고 선체중앙 부분의 파고는 낮아지고 선미쪽 파고는 더욱 높아지는 현상을 파악할 수 있었다.

• 한국전산응용수학회:학술대회논문집
• /
• 한국전산응용수학회 2003년도 KSCAM 학술발표회 프로그램 및 초록집
• /
• pp.1-1
• /
• 2003

In this talk, a reduced-order modeling methodology based on centroidal Voronoi tessellations (CVT's)is introduced. CVT's are special Voronoi tessellations for which the generators of the Voronoi diagram are also the centers of mass (means) of the corresponding Voronoi cells. The discrete data sets, CVT's are closely related to the h-means clustering techniques. Even with the use of good mesh generators, discretization schemes, and solution algorithms, the computational simulation of complex, turbulent, or chaotic systems still remains a formidable endeavor. For example, typical finite element codes may require many thousands of degrees of freedom for the accurate simulation of fluid flows. The situation is even worse for optimization problems for which multiple solutions of the complex state system are usually required or in feedback control problems for which real-time solutions of the complex state system are needed. There hava been many studies devoted to the development, testing, and use of reduced-order models for complex systems such as unsteady fluid flows. The types of reduced-ordered models that we study are those attempt to determine accurate approximate solutions of a complex system using very few degrees of freedom. To do so, such models have to use basis functions that are in some way intimately connected to the problem being approximated. Once a very low-dimensional reduced basis has been determined, one can employ it to solve the complex system by applying, e.g., a Galerkin method. In general, reduced bases are globally supported so that the discrete systems are dense; however, if the reduced basis is of very low dimension, one does not care about the lack of sparsity in the discrete system. A discussion of reduced-ordering modeling for complex systems such as fluid flows is given to provide a context for the application of reduced-order bases. Then, detailed descriptions of CVT-based reduced-order bases and how they can be constructed of complex systems are given. Subsequently, some concrete incompressible flow examples are used to illustrate the construction and use of CVT-based reduced-order bases. The CVT-based reduced-order modeling methodology is shown to be effective for these examples and is also shown to be inexpensive to apply compared to other reduced-order methods.

• The Korean Journal of Physiology
• /
• 제18권1호
• /
• pp.1-8
• /
• 1984

In order to determine the extent of the placental transfer of Lithium ion, pregnant rabbits at $27{\sim}29$ days of gestation, which has hemochorial placenta similar to the human placenta, received 2 mM/Kg of $Li^+$ in the form of LiCl intravenously. Maternal arterial blood, placental sinus blood, fetal blood, amniotic fluid and maternal urine were drawn two hours after the single dose of LiCl. Concentrations of $Li^+$, $Na^+$, $K^+$ and osmolarity were measured in plasma of collected bloods, amniotic fluid and urine. Followings are the results obtained. 1) Evident level of $Li^+$ was detected in fetal blood, although fetal plasma concentration of $Li^+$ found to be almost one third of maternal plasma. 2) Plasma concentration of $Li^+$ in placental sinus blood was higher than that in fetal plasma but lower than that in maternal plasma. It means that downward concentration gradient of $Li^+$ from mother to fetus was still remarkable two hours after the injection. 3) Significant level of $Li^+$ was also detected in amniotic fluid. It seemed likely that $Li^+$, at least in part, excreted by the fetal urinary tract. 4) There were no differences in $Na^+$ and osmolar concentration between fetal and maternal blood. 5) From above results, it was concluded that $Li^+$ may transfer across the placenta but limited passage capacity through placental barrier for $Li^+$ is significant, beacause net transfer assumed to be going on even at two hours, at which time maternal equlibrium has been reached.

• 한국콘텐츠학회논문지
• /
• 제8권4호
• /
• pp.17-29
• /
• 2008

컴퓨터 그래픽스에서 물을 애니메이션하거나 다양한 특수효과를 표현하기위해 유체역학의 기술들이 사용되고 있다. 하드웨어성능이 높아지면서 이전에 불가능했던 알고리즘들이 실시간으로 가능해지고 있기는 하지만, 정밀한 표현에는 여전히 많은 시간이 소요되며, 성능과 사실성 사이의 균형을 위한 다양한 기술들이 연구되고 있다. 특히 게임과 같은 문맥을 가지는 곳에서 사용자의 요구에 의해 바다나 호수 같은 넓은 지역의 물표면과 객체의 상호작용을 표현하기 위해서는, 물리적 사실성을 어느 정도 희생하더라도 시각적인 사실성을 유지하는 범위에서 실행 성능을 높이는 것이 우선시 된다. 본 논문에서는 물표면과 객체의 상호작용에 의한 다양한 물표면의 형태변화를 선형 컨벌루션 기법과 경계구를 이용하여 실시간으로 자연스럽게 애니메이션하는 방법을 제안한다.

• 대한한방소아과학회지
• /
• 제24권1호
• /
• pp.126-133
• /
• 2010

Objectives In this study, we evaluated the therapeutic effects of Gami-Bojungikgitang and Gami-Jwagwieum for bleomycin-induced lung fibrosis in mice. Methods Extracted lyophilization, Gami-Bojungikgitang (96g) and Gami-Jwagwieum (118g) boiled, filtered, depressed, concentrated, and are obtained. They were divided into five groups: normal, group IA; Animal group treated with bleomycin observed on the 21th day, group IB; Animal group treated with bleomycin observed on the 42th day, group IIA; Animal group treated with bleomycin and Gami-Bojungikgitang. Gami-Jwagwieum observed on the 21th day, group IIB; Animal group treated with bleomycin and Gami-Bojungikgitang/Gami-Jwagwieum observed on the 42th day. Mice are used on the 42th day and as a result, bronchoalveolar lavages fluid is obtained. Counting total number of cells, different ratio of macrophage, lymphocyte, and neutrophil are established. Results In animal group treated with bleomycin and Gami-Bojungikgitang, total cell count decreased by 50% in 3 weeks compared to animal group with non-administrated Gami-Bojungikgitang. However, total cell count in 6 weeks increased compared to 3 weeks although total cell count still decreased compared to animal group with non-administrated Gami-Bojungikgitang. In the view of differential cell counts in bronchoalveolar lavages fluid in treatment group on 3 and 6 weeks, neutrophile was a few and lymphocyte decreased. In animal group treated with bleomycin and Gami-Jwagwieum, total cell count decreased by 50% in 3 and 6 weeks compared to animal group with non-administrated Gami-Jwagwieum. In the view of differential cell counts in bronchoalveolar lavages fluid in treatment group on 3 and 6 weeks, lymphocyte also decreased. Conclusions Gami-Bojungikgitang and especially Gami-Jwagwieum for bleomycin-induced lung fibrosis in mice were effective in total cell count and differential cell count.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.29-35
• /
• 2001

The development of filament stretching extensional rheometers over the past decade has enabled the systematic measurement of the transient extensional stress growth in dilute and semi-dilute polymer solutions. The strain-hardening in the extensional viscosity of dilute solutions overwhelms the perturbative effects of capillarity, inertia & gravity and the kinematics of the extensional deformation become increasingly homogeneous at large strains. This permits the development of a robust open-loop control algorithm for rapidly realizing a deformation with constant stretch history that is desired for extensional rheometry. For entangled fluids such as concentrated solutions and melts the situation is less well defined since the material functions are governed by the molecular weight between entanglements, and the fluids therefore show much less pronounced strain-hardening in transient elongation. We use experiments with semi-dilute/entangled and concentrated/entangled monodisperse polystyrene solutions coupled with time-dependent numerical computations using nonlinear viscoelastic constitutive equations such as the Giesekus model in order to show that an open-loop control strategy is still viable for such fluids. Multiple iterations using a successive substitution may be necessary, however, in order to obtain the true transient extensional viscosity material function. At large strains and high extension rates the extension of fluid filaments in both dilute and concentrated polymer solutions is limited by the onset of purely elastic instabilities which result in necking or peeling of the elongating column. The mode of instability is demonstrated to be a sensitive function of the magnitude of the strain-hardening in the fluid sample. In entangled solutions of linear polymers the observed transition from necking instability to peeling instability observed at high strain rates (of order of the reciprocal of the Rouse time for the fluid) is directly connected to the cross-over from a reptative mechanism of tube orientation to one of chain extension.

• Steel and Composite Structures
• /
• 제42권2호
• /
• pp.243-256
• /
• 2022

A coupled finite element method (FEM)-boundary element method (BEM) for analyzing the hydroelastic response of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) floating plates under moving loads is firstly introduced in this article. For that aim, the plate displacement field is described utilizing a generalized shear deformation theory (GSDT)-based FEM, meanwhile the linear water-wave theory (LWWT)-relied BEM is employed for the fluid hydrodynamic modeling. Both computational domains of the plate and fluid are coincidentally discretized into 4-node Hermite elements. Accordingly, the C1-continuous plate element model can be simply captured owing to the inherent feature of third-order Hermite polynomials. In addition, this model is also completely free from shear correction factors, although the shear deformation effects are still taken into account. While the fluid BEM can easily handle the free surface with a lower computational effort due to its boundary integral performance. Material properties through the plate thickness follow four specific CNT distributions. Outcomes gained by the present FEM-BEM are compared with those of previously released papers including analytical solutions and experimental data to validate its reliability. In addition, the influences of CNT volume fraction, different CNT configurations, water depth, and load speed on the hydroelastic behavior of FG-CNTRC plates are also examined.

• Tribology and Lubricants
• /
• 제26권4호
• /
• pp.219-223
• /
• 2010

Despite the increasing need of nanometer-scale accuracy in abrasive machining using ultrasmall particles such as abrasive jet and chemical mechanical polishing(CMP), the process mechanism is still unknown. Based on the background, research on the effects of various process parameters on the machined surface at abrasive machining was motivated and performed by using finite element analysis where the effect of slurry fluid flow involved. The effect of particle shape on the machined surface during particle-surface collision was discussed in this paper. The results from FEA simulation revealed that any damage or defect generation on machined surface by the impact may occur only if the particle has enough impact energy. Therefore, it could be concluded that generation of the defects and damage on the wafer surface after CMP process was mainly due to direct contact of the 3 bodies, i.e., pad-particle-wafer.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.31-39
• /
• 1999

Previous researches and experiments have already verified that the primary noise source of high pressure tandem axial thpe piston pump is fluid-borne noise from the process of oil distribution between the kidney-shaped port and valve plate. So, many researchers have improved pressure gradients and reduced sound levels by applying pre-compression and pre-decompression metering grooves to valve plate. In practice however, the sound level of th high pressure tandem axial type piston pump is still undesirable. This paper testified the effect of pumping phase of the piston on vibration and noise of th high pressure tandem axial type piston pump on the best of theoretical research in $this^(1)$. Therefore considering the pumping phase of the piston when assembling the tandem axial type piston pump, it is possible to reduce 1.5~2[dB]of sound level.