• 한국음향학회지
• /
• 제43권1호
• /
• pp.49-59
• /
• 2024

최근 환경규제가 강화되고 고유가 문제로 인하여 전기차 시장이 점차 커지고 있으며 또한 내연기관 자동차에서도 엔진의 Noise, Vibration, Harshness(NVH) 관련 소음이 저감되고 외부에서 유입되는 소음의 차폐 기술이 발전됨에 따라 Buzz, Squeak, Rattle(BSR) 이음의 민감도가 증가하는 추세이다. 본 연구에서는 자동차의 Panoramic Curved Display(PCD)에서 발생하는 Stick-slip 이음과 고분자 플라스틱의 표면에너지 및 극성 성분과의 상관관계에 대하여 분석하였다. 극성 고분자 소재인 Acrylonitrile Butadiene Styrene(ABS)와 PolyCarbonate-Acrylonitrile Butadiene Styrene(PC-ABS)를 대상으로 컴파운드 소재를 제작하여 평가하였다. 결과적으로 고분자 플라스틱의 극성성분이 3.86 mN/m 이상일 때 Stick-slip 거동이 발생하였으며, 시간에 따른 마찰 거동에서 absolute transition slope가 증가할수록 Stick-slip의 이음 가능성이 증가하고 마찰계수의 값 차이가 클수록 Stick-slip 이음의 세기가 증가하였다.

• 한국음향학회지
• /
• 제43권3호
• /
• pp.270-276
• /
• 2024

본 연구에서는 기계전자 제품에 사용되는 소재의 마찰실험을 통해 스틱슬립 특성을 분석하고 냉장고 내부에서 발생하는 이상소음을 저감하는 개선안을 제안하였다. 소재의 스틱슬립 현상을 분석하기 위해 마찰실험장치를 제작하고 마찰실험을 수행하였다. 또한 냉장고 내부에서 발생하는 이상소음의 현상과 위치를 분석하기 위해 내부부품의 진동과 소음 레벨을 측정하였다. 그리고 냉장고 현상분석 결과와 마찰실험 결과를 비교하여 냉장고 내부에서 발생하는 이상소음은 내부부품의 스틱슬립 현상에 의한 것임을 확인하였다. 마지막으로 이상소음을 저감하는 개선안을 제안하기 위해 다구찌 기법을 이용한 마찰실험을 수행하였다. 그리고 개선안을 냉장고에 적용하여 성능을 검증하였다.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.64-71
• /
• 2001

In general, precise linear actuators using piezoelectric element are driven by friction force. Exact understanding of friction plays an important role in analysis and control of a motor. In this research, we designed a precise linear actuator using piezoelectric elements and observed its dynamic characteristics. By varying phase angle difference and amplitudes of the sinusoidal waves that are driving inputs, we can know that it is possible to control moving direction and distance of the slider. As preload is increased, its moving distance is decreased. And also, we have modeled a precise linear actuator using stick slip friction models such as classical, Karnopp. and reset integrator. Finally, by comparing the results of simulation and experiment, it was verified that the model is well designed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.672-677
• /
• 2000

This paper compares the two kinds of friction model. The first model is classical stick/slip model. In the stick/slip model, the system is treated to have two different states, namely, stick state or slip state. The second one is continuous model developed by Dahl et. al, namely, Extended Dahl's model. Each model has unique properties, and can be best useful when it is applied on the appropriate system. In this paper, each model is applied on the simple two-block system and the complex automatic transmission system. And the simulation result including simulation accuracy and time required are compared.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.88-98
• /
• 2014

A moving mass on a skewed linear guideway model to analyze the friction-induced stick-slip behavior of ball-screw-driven slides is proposed. To describe the friction force, a friction coefficient function is modelled as a third-order polynomial of the relative velocity between the slide mass and a guideway. A nonlinear differential equation of motion is derived and an approximate solution is obtained using a perturbation method for the amplitudes and base frequencies of both pure-slip and stick-slip oscillations. The results are presented with time responses, phase plots, and amplitude plots, which are compared adequately with those obtained by Runge Kutta 4th-order numerical integration, as long as the difference between the static and kinematic friction coefficients is small. However, errors in the results by the approximate solution increase and are not negligible if the difference between the friction coefficients exceeds approximately 40% of the static friction coefficient.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.717-720
• /
• 2002

An Amplitude Proportional Friction Damper (APFD) system is considered in order to improve the stick-slip characteristics of Coulomb friction damper. The frictional force is proportional to the amplitude in APFD system and the system is non-linear as is Coulomb damper system. The free vibration analysis on an 1-DOF system has conducted to demonstrate the characteristics of the APFD system and the results show that the APFD system has similar damping characteristics to the viscous damper system. It is concluded that the APFD system may become a cost effective substitution for the viscous damper and it also has certain advantages over Coulomb damper system since the APFD system can be designed to work with no stick-slip.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.59-60
• /
• 2012

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.6-12
• /
• 2015

This paper investigates the stick-slip characteristic of magnetorheological elastomer (MRE) between an aluminum plate and the surface of the MRE. MRE is a smart material and it can change its mechanical behavior with the interior iron particles under the influence of an applied magnetic field. Stick-slip is a movement of two surfaces relative to each other that proceeds as a series of jerks caused by alternate sticking from friction and sliding when the friction is overcome by an applied force. This special tribology phenomenon can lead to unnecessary wear, vibration, noise, and reduced service life of work piece. The stick-slip phenomenon is avoided as far as possible in the field of mechanical engineering. As this phenomenon is a function of material property, applied load, and velocity, it can be controlled using the characteristics of MRE. MRE as a soft smart material, whose mechanical properties such as modulus and stiffness can be changed via the strength of an external magnetic field, has been widely studied as a prospective replacement for general rubber in the mechanical domain. In this study, friction force is measured under different loads, speed, and magnetic field strength. From the test results, it is confirmed that the stick-slip phenomenon can be minimized under optimum conditions and can be applied in various mechanical components.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.772-779
• /
• 2000

The friction and wear behavior of short carbon fiber reinforced polyetheretherketone was studied experimentally under dry sliding conditions against SCM440(AISI 4140) disks with a different surface roughness and hardness at the low sliding speeds and the high pressures on a pin-on-disk apparatus. Under the low disk surface roughness value the earsplitting noise and stick-slip were occurred. The increased adhesion friction and wear factor with stick-slip made the friction and wear behavior worse. Under the high disk surface hardness the break and falling-off of carbon fibers were accelerated. The carbon fibers fallen off from the matrix were ground into powder between two wear surfaces and this phenomenon caused a abrasive friction and wear factor to increase. So the friction and wear behavior became worse. With the transfer film made of wear particles formed on a disk, the carbon powder film formed on a pin lowered a friction coefficient.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.108-117
• /
• 1997

To prove the stability and the effectiveness of the robust non-linear friction control suggested and proved analytically in the previous paper, the describing function analysis is introduced. The instability of the Southward's nonlinear friction compensation for a digital position control and the improvement of phase margin of the robust nonlinear friction compensation are verified qualitatively through the describing function analysis. Those controls are applied to a single-axis digital servo driving experimental setup which has inherent stick-slip friction and experimental results confirm the results obtained in and the effectiveness of the robust nonlinear friction compensation for a digital position control.