• 열처리공학회지
• /
• 제17권4호
• /
• pp.230-235
• /
• 2004

Present work was carried out to investigate the influence of welded conditions, such as welding current, diameter of welding wire on the microstructural change and mechanical properties of TIG welded joint in AZ31B Mg alloy. It was found that good and sound welded joint was achieved in all welding conditions. The grain size decreased with increasing welding current and decreasing diameter of welding wire. Also, the second phases were homogeneously distributed in the grain and grain boundary as decreasing welding current and diameter of welding wire. The ${\beta}$ discontinuos precipitates were observed in the welded joint, but this microstructure has not been reported by previous researchs in AZ31B Mg alloy. The hardness value is affected by the existence state of the second phase and the hardness of the welded joint region is lower than the other regions in welded AZ31B Mg alloy. The strength of the welded joint region was influenced by the grain size and has more than 90%, compared to that of ASTM standard specification.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.779-788
• /
• 2009

This study is the result of a field survey of four sewer networks selected from in domestic sanitary sewers. The main purpose of this study is to understand the characteristics of sediment in domestic sanitary sewers and to verify sewer design criteria using minimum Shear Stess for preventing sedimnet. This investigation was carried out at a total of 22 points in the four areas. The characteristics of the sanitary solids that were sampled for suspended solids and bedload matter showed a specific gravity of 1.09, a median particle size of 1.26mm, and 88.9% organic contents. On the other hand, deposited sediment was found at 6 points out of the 22 monitoring points. The analysis results of disposed sediment showed a specific gravity of 2.16, a median particle size of 1.31mm, and 15% organic contents. In flow velocity, the majority of deposited sites have under 0.6m/s. However, one-site which was in large-diameter collector sewers, has recorded over 0.6m/s. The analysis results of tractive force showed that the ability of tractive force has to be $1.5{\sim}2.0N/m^2$ to prevent sediment in domestic Sanitary sewers. In conclusion, to prevent sediment it is necessary to apply a design velocity criteria higher than 0.6m/s in the large diameter collector sewer.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.608-619
• /
• 2017

In this paper, the effects of parameters related to the residual stress induced due to laser shock peening process to determine mitigation of the initial tensile residual stresses are discussed, such as the maximum pressure, pressure pulse duration, laser spot size and number of laser shots. In order to estimate the influence of the initial tensile residual stresses, which is generated by welding in 35CD4 50HRC steel alloy, the initial condition option was employed in the finite element code. It is found that $2{\times}HEL$ maximum pressure and a certain range of the pressure pulse duration time can produce maximum mitigation effects near the surface and depth, regardless of the magnitudes of tensile residual stess. But plastically affected depth increase with increasing maximum pressure and pressure pulse duration time. For the laser spot size, maximum compressive residual stresses have almost constant values. But LSP is more effective with increasing the magnitudes of tensile residual stress. For the multiple LSP, magnitudes of compressive residual stresses and plastically affected depths are found to increase with increasing number of laser shots, but the effect is less pronounced for more laser shots. And to conclude, even though the initial tensile residual stresses such as weld residual stress field are existed, LSP is enough to make the surface and depth reinforcement effects.

• 대한기계학회논문집
• /
• 제9권1호
• /
• pp.40-46
• /
• 1985

본 연구에서는 제 1보에 밝힌 바 있는 용접 HAZ조직의 파괴인성에 영향을 주 는 PWHT 유지시간과 가열속도에 이어, 용접 HAZ의 불안정포성파괴에 미치는 용접잔유 응력의 영향을 상세히 밝히기 위하여 일층 용접을 실시하고, 이 용접재의 용접HAZ에 단축상태의 일정한 응력을 작용시켜 주면서 소정의 열처리를 실시함으로써 용접후 열 처리시 용접HAZ에 작용된 응력의 크기가 파괴인성에 어떠한 영향을 미치는지를 COD파 괴인성시험, 미소경도시험, 파면관찰을 통하여 고찰하고자 한다.

• 한국지반환경공학회 논문집
• /
• 제4권2호
• /
• pp.27-37
• /
• 2003

본 연구에서는 삼축 조건하에서 지오셀-흙 복합체의 응력-변형 거동과 지오셀에 의한 강도증가를 고찰하였다. 연구를 위하여 직경 50mm, 높이 100mm인 시료 중앙에 직경 50mm, 높이는 각각 35, 50, 70mm인 연성의 모형셀을 넣고 3개의 밀도 변화에 따른 일련의 삼축시험을 수행하였다. 시험결과 지오셀의 구속은 모래의 등가점착력을 유발시키는 것으로 나타났으나 점착력은 지오셀 재료의 특성에 관계되는 것으로 나타났다. 기존의 지반보강재에 의한 강도증가가 등가점착력의 유발만 나타난 것과는 달리 본 연구에서 사용된 탄성의 고무지오셀 재료는 등가점착력의 유발뿐만 아니라 내부마찰각도 증가시키는 것으로 나타났다. 지오셀-모래 복합재의 강도를 쌍곡선 모델에 적용시킨 결과 지오셀 복합재료의 거동이 일반 흙과는 거동이 다르므로 적용된 설계하중 범위에서의 첨두강도 결정이 거동을 묘사하는데 중요한 것으로 인식되었다.

• 한국식품영양과학회지
• /
• 제27권1호
• /
• pp.175-181
• /
• 1998

The relation between lipid peroxidation and thrombotic reaction were investigated in streptozotocin (STZ)-induced diabetic rats. Sprague-Dawley male rats weighing 100$\pm$10gm were randomly assigned to normal and STZ-induced diabetic group(DM). Diabetes was experimentally induced by intravenous injection of 55mg/kg of body weight of STZ in citrate buffer(pH 4.3) after 4 weeks feeding of basal diet. Animals were sacrificed at the 6th day of diabetic states. Body weight gains were lower in diabetic group after STZ injection. Serum levels of thiobarbituric acid reacting substances(TBARS) that were markedly increased in DM group compared with of normal group. TBARS levels of HDL and LDL were similar patterns to total TBARA of serum. Activities of platelet phospholipase A2(PLA2) were higher in diabetic group than those of normal group. Activities of platelet cyclooxygenase were 106% in DM group than normal group. Platelet thromboxane A2(TXA2) formation was increased in DM group than normal group. Production of aortic prostacyclin(PGI2) was lower in diabetic group than that of normal group. PGI2/TXA2 ratios were decreased by 55% in DM groups than those of normal group. The present results indicate that STZ-induced diabetic rats are more sensitive to oxidative stess which leads to acceleration of lipid peroxidation and platelet aggregability. In conclusion, accelerating effect of lipid peroxidation and thrombogenesis in diabetic state is regareded to be resulted from enhancement of PLA2 activity and arachidonic acid metabolism, inhibition of antiaggrgating agent and aortic PGI2 formation.

• 한국전산구조공학회논문집
• /
• 제20권6호
• /
• pp.699-708
• /
• 2007

일반적으로 깊은 보의 개구부 보강을 할 경우 개구부 주변의 부족한 내력에 대해 수직, 수평, 대각, 혹은 혼합된 배근 형태를 사용하게 되는데, 경제성과 구조적 안전성을 고려하기 위해서는 각 배근 형태 및 방법에 따른 깊은 보의 거론 평가와 적절한 조합에 관한 연구가 절실히 필요하다. 이에 본 연구에서는 개구부 보강방법을 변수로 한 simulation 모델을 통해 수직, 수평 보강의 효과에 대해 해석적으로 검증을 한 후, 각 규준에서 제시하고 있는 개구부가 있는 깊은 보의 전단 내력식을 분석하고 해당 식을 보완하여 단순지지 1경간 및 연속 경간에 적용 가능한 전단 내력 산정식을 제안하고자 한다.

• 한방비만학회지
• /
• 제12권2호
• /
• pp.8-16
• /
• 2012

Objectives: This study is designed to report the correlation between Body Mass Index(BMI), Heart Rate Variability(HRV), stess, drinking alcohol, coffee and smoking. Methods: From 1st January 2010 to 31st December 2012, We tested on 458 patients who hospitalized in Cheong Yeon Korean Medicine Hospital for reducing their weights, then we collected the statistical analysis with the result of their HRV and the special survey. Results: This experiment was studied on total 458 patients, 27 were men and 431 were women. The average of the age of men was $28.23{\pm}4.22$ and $24.31{\pm}385$ was women. There were significant differences in BMI, Low frequency(LF), High frequency(HF), stress score, frequency of drinking alcohol, smoking and drinking coffee followed by their ages. When we looked at the correlation between obesity with smoking and drinking coffee, we can see that the BMI increased, the frequency of drinking alcohol was decreased, however there were no statistic correlation in smoking and drinking coffee with BMI. Conclusions: With the result of HRV, we can suggest the BMI and stress score are correlated each other but we need further studies about passive stress relief by taking favourite food such as drinking alcohol, smoking, drinking coffee, etc.

• Journal of Ginseng Research
• /
• 제19권1호
• /
• pp.31-38
• /
• 1995

Antioxidant effect of Korean ginseng (Panax ginseng C.A. Meyer) was investigated in rats. Long-term administration of ginseng water extract protected the activity of liver cytosotic SOD, catalase and glutathione peroxidase from being significantly decreased with advancing age (p<0.05). It was more effective toward glutathione peroxidase than other antioxidant enzymes. However, the level of sulfhydryl compounds and its related enzymes such as glutathione reductase and glutathione-5-transferase was not significantly changed by the administration of ginseng. Liver microsomal formation of reactive oxygen species such as superoxide and hydrogen peroxide did not show a significant difference between two groups although it was slightly decreased with age, but lipid peroxidizability of microsomal membrane induced by a prooxidant was slightly lower in ginseng-treated rats. Interestingly, antioxidant capacity of plasma from ginseng treated rats on autooxidation of ok-brain homogenates was much higher than that of normal ones. However, resistance of RBC membrane against oxidative stress showed a similar tendency. The content of serum TBA reactive substances lowered consistently in the rats treated with r ginseng at all corresponding age and a significant difference between two groups was found at 24 months of age (p<0.05). Ginseng extract protected lipid peroxidation in brain and liver. This protection was more effective in the stressed rats imposed by immobilization than normal ones. In conclusion, ginseng water extract protected the age related deterioration of major antioxidant enzymes, and this effect was more striking with increasing duration of treatment. This comprehensive antioxidant action of ginseng seems to be bra certain action of ginseng other than a direct antioxidant action, which might be a long term normalizing effect through the harmony of various components.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권2호
• /
• pp.111-117
• /
• 2001

There are three designs of thread form in screw type implants: V-thread, Reverse buttress thread and Square thread. The purpose of this study was to find out how thread form designs have an influence on the equivalent stress, equivalent strain, maximum shear stress and maximum shear strain and which design of thread form generates more maximum equivalent stress and strain. 3-D finite element analysis was used to evaluate the stress and strain patterns of three tread types. The results of this study were as follow. 1. Under the 200N of axial load, the value of maximum equivalent stress is smallest in square thread and there is no significant difference between that of V thread and reverse buttress thread. 2. Under the 200N of axial load, the value of maximum equivalent strain is largest in V thread and smallest in square thread. 3. Under the 200N of axial load, the value of maximum shear stress is smallest in square thread and there is no significant difference between that of V thread and reverse buttress thread. 4. Under the 200N of axial load, the value of maximum equivalent strain is largest in V thread and there is no significant difference between that of square thread and reverse buttress thread. 5. Above results show that the square thread has special advantages in stress and strain compared with other thread types, especially in shear stess which is most determinant to implant-bone interface. Considering the superior biomechanical properties of square form implant, we presume that square form implant has better clinical results than the other types of implants in the same clinical conditions.