• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.709-713
• /
• 1996

The ceramic has such high qualities as light weight, abrasion resistance, heat resistance compared with metal, but since it is breakable, it can't be used as structural material and it is desirable to joining metal which is full of toughness, but, according as the ceramic/metal joint is executed at high temperature, the joint residual stress develops near the joint sides in the process of cooling the high temperature down to the suitable temperature due to difference of the thermal expansion coefficient between ceramic and metal, and the joint residualstress lowers the fracture strength. In this study, to ensure security and improvement of bending strength, 1 studies on see distribution shape of residual stress according to high thermal cycle, and the influnence of theraml cycle and distribution shape of residual stess on joint-strength.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1261-1270
• /
• 2000

This paper is concerned with the development of a general model for predicting material damping in laminates based on the strain energy method. In this model, the effect of interlaminar stress on damping is taken into accounts along with those of in-plane extension/compression and in-plane shear. The model was verified by carrying out the damping measurements on $90^0$ unidirectional composite beams varying length and thickness. The analytical predictions were favorably compared with the experimental data. The transverse shear($$\sigma$_{yz}$) appears to have a considerable influence on the damping behaviors in $90^0$ unidirectional polymer composites. However, the other interlaminar stresses($$\sigma$_{xz}$, $$\sigma$_z$) were shown to have little impact on vibration damping in $90^0$ laminated composite beam.

• 한국동물학회지
• /
• 제38권2호
• /
• pp.238-247
• /
• 1995

쥐 뇌에·처 카드뮴에 대한 metallothionein-like protein(MTLP)의 유도 생성 능력을 알아보기 위하여 Stereotaxic Bpparatus를 이용하여 측뇌실에 카드뮴을 주사하여 다음과 같은 결과를 얻었다. 대조군과 생리식염수 처리군에서는 MTLP의 양적 변화가 없었고. 카드를 처리군은 대조군과 식염수 처리군에 비하여 MTLP가 2배 이상 유도되었다. MTLP의 분자량은 6.000-6,500 Oa 정도 였으며. 흡광도가 254 nm에서 높게 나타나고. 280 nm에서 낮게 나타나는 것으로 보아 thiol 함량이 높고 방향족 아미노산이 적은 단백질임을 알 수 있었다 또한 카드뮴 처리군에서는 MTLP 이외의 여러 종류의 protein-30. 64, 68, 80, 108 kDa-들이 유도되었다 이와 같은 결과로 카드뮴은 흰쥐 뇌에서도 MTLP의 유도 능력이 있음을 알 수 있었다.

• 한국표면공학회지
• /
• 제31권2호
• /
• pp.91-100
• /
• 1998

NiCrAlY/YSZ(8wt%$Y_2O_3-ZrO_2$) functionally graded thermal barrier coating (FGC) layers on a Co-base superalloy (HAYNESS 188) substrate were fabstrate were fabicated using Ar shielded single torch air plasma spraying method. Functional grading with the stepwise compositional change throughout layer thickness. Microstructural observation trvealed a successful fabrication of NiCrAlY/YSZ FGC. From the results of the curvature measurement, adhesive strength measurement and thermal shock test for the FGC, it was concluded that the optimum conditions of functionally graded coating layer thinkness and compositional pattern exit to enhance the properties of FGC, which is closely related to the internal residual stess distribution witin it.

• 한국지진공학회논문집
• /
• 제4권4호
• /
• pp.73-81
• /
• 2000

본 연구에서는 용접 수평헌치로 보강된 철골 모멘트 접합부의 내진설계법을 제시하고자 한다. 최근의 실험결과에 의하면 보의 하부를 수평헌치로 용접하는 방안은 취약한 내진성능이 드러나 기존 철골 모멘트 접합부의 내진보강이나 내진성능이 뛰어난 건물의 구축에 매우 효과적임을 알 수 있다. 용점 삼각헌치로 보강된 접합부의 설계법은 최근에 미국의 연구자들에 의해 제시된 바가 있다. 그러나 이 설계법은 응력 전달 메커니즘이 상이한 수평헌티 접합부의 설계에는 적용될수 없다. 본 논문에서는 우선 수평헌치와 보의 상호작용 및 변형의 적합 조건을 고려하여 도출된 단순화된 해석적 응력전달 모형을 간략히 기술한다. 이를 기초로 수평헌치 접합부의 단계별 내진 설계절차를 제안한다. 아울러 헌티단부의 응력집중을 줄이는데 매우 효과적인 디테일도 제시하고자 한다.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.67-74
• /
• 2018

The verification for the design limit margin of the power device for the information communication and surveillance systems using HALT(Highly Accelerated Life Test) reliability test is described. The HALT reliability test performs with a step stress method which change condition until the marginal step in a design and development phase. The HALT test methods are the low temperature(cold) step stress test, the high temperature(hot) step stress test, the thermal shock cyclic stess test, and the high temperature destruct limit(hot DL) step stress test. The power device is checked the operating performance during the test. In this paper, the HALT was performed to find out the design limit margin of the power device.

• 성인간호학회지
• /
• 제15권2호
• /
• pp.173-182
• /
• 2003

Purpose: This study was founded to identify perception and ways of coping with stress according to classification of Sasangin(4 constitutions). Method: The subjects were 258 regular students who majored in oriental medicine in Jechon and Seoul. Data was collected by 3 types of questionnaires for 3 months; Perceived stess, ways of coping, Questionnaires of Sasang Constitution Classification (QSCCII). Data analysis was conducted by SPSS version 10. Result: 1) Difference of perceived stress in Sasangin: Perceived stress by the Sasangin indicated that Soeumin perceived more stress than Soyangin and Taeumin(P=.013). 2) Different method in coping with stress of Sasangin: It was found that Soeumin didn't make use of emotional coping way according to the analysis(P=.040). 3) Relationship between ways of coping for stress and perceived stress in Sasangin: It was shown that as Soeumin perceived stress so higher than Soyangin and Taeumin, they tended to use the solving problem-method therefore it was shown to have a negative correlation(P=.044). Conclusion: In conclusion, it was found that there were differences of Sasangin in perceived stress and ways to cope with it. The dose relationship between the perception and coping method of stress was found.

• 한국임상보건과학회지
• /
• 제4권1호
• /
• pp.510-521
• /
• 2016

Purpose. The aim of this study was to provide Aromatherapist with analysis of correlation between MBTI personality type and scent preference of natural aroma essential oil in university students. Methods. Data was analyzed by students whom participated in the research on the scent preference of natural aroma essential oil of students from m university who accomplished to MBTI personality survey. Results. As a result, the introverted personality types more liked Peppermint and felt more intensive scent than extroverted personality types did(p=0.006). Extroverted personality types recognized Neroli as feminine scent(p=0.034) and introverted personalty types recognized Frankincense as feminine scent(p=0.045). Extroverted personality types felt that Juniper berry is exciting scent(p=0.036) and that Rosemary(p=0.044) and Lavender(p=0.030) are eco-friendly scent. And introverted personality types relatively less did than extroverted personality types. Conclusions. This study is to get a basic data of aroma preference of university students by looking into the influence that MBTI personality type affect natural aroma preference and to use this data for ease off school stress and job seekng stess and counsel the students.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.123-128
• /
• 2004

This study investigated effect of arm posture, repetition of wrist motion and external load on perceived discomfort. The arm postures were controlled by shoulder flexion, elbow flexion, and ist motions such as flexion, extension, radial deviation and ulnar deviation. An experiment was conducted to measure discomfort scores for experimental treatments using the magnitude estimation, in which the L16 orthogonal array was adopted for reducing the size of experiment. The results showed that while the effect of the shoulder flexion, repetition of wrist motion and external load was statistically significant at $\alpha=0.05$or 0.10, that of the elbow and wrist motions was not. Discomfor ratings increased linearly as levels of wrist repetition and external load increased. This implies that the existing posture classification schemes such as OWAS, RULA, which do not properly consider effect of motion repetition and external load, may underestimate postural load. Based on the regression equation for wrist repetition and external load, isocomfort region indicating the region within which discomfort scores were expected to be the same was proposed. It is recommended that when assessing risk of postures or developing new posture classification schemes, motion repetition and external load as well as posture itself be fully taken into consideration for precisely evaluating postural stress.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1349-1355
• /
• 1990

By examining the fatigue deformation properties of 12% Cr rotor steel which has been proved to have high fatigue and creep rupture strength around 600deg. C, authors reviewed major fatigue life prediction models such as Manson, Langer and Morrow equations, and following results were obtained. (1) A simple life prediction model for 12% Cr rotor steel was obtained as follows : DELTA..epsilon.$_{t}$ =2.18+.sigma.$_{u}$ /E+ $N^{-0.065}$+ $e^{0.6}$ $N^{-0.025}$ This equation shows that fatigue life, N, can be easily determined when total strain range, DELTA..epsilon.$_{t}$ and ultimate tensile strength, .sigma.$_{u}$ are known by simple tension test on the given test conditions. (2) Life prediction equation with equivalent maximum stress, DELTA..sigma./2, corresponding maximum strain in one cycle at room temperature is as follows: DELTA..sigma./w=-7.01logN+96.69+96.69