• Korean Chemical Engineering Research
• /
• 제54권5호
• /
• pp.630-635
• /
• 2016

선행연구에서는 2차오염이 없는 물리적 처리방법인 전단응력을 이용한 선박평형수 처리장치에 대하여 연구하였다. 정지상태의 외부 실린더와 회전하는 내부 실린더 사이에 발생하는 전단응력을 이용하여 다양한 미생물을 파쇄 처리하는 원리이며, 전단응력은 실린더 표면의 형태나 회전속도에 따라 크기가 달라진다. 전단응력의 크기와 전단응력을 받는 시간에 따라 멸균정도가 차이를 보이기 때문에, 다양한 조건에 따른 멸균효율을 밝히는 실험이 필요하며 이를 통해 상업용 장치의 제작을 위한 기초 자료를 마련하고자 하였다. 선행연구에서는 disk type과 cylinder type의 비교를 통하여 cylinder type이 우수함을 밝혔다. 본 연구에서는 선행연구를 통하여 얻은 결과를 바탕으로 cylinder type, groove type, knurling type의 표면 조건을 변화시켜 가장 우수한 조합을 밝혀냄과 동시에 실린더 사이의 간격에 따른 회전속도 및 유속 조건을 최적화 하고자하였다. 그 결과 groove type에서 250 mL/min의 유량조건에서는 8000 rpm 이상, 혹은 500 mL/min의 유량조건에서는 10000 rpm 이상에서 100% 살균 처리되는 결과를 얻었다.

• Applied Biological Chemistry
• /
• 제26권4호
• /
• pp.248-254
• /
• 1983

토양(土壤) 살충제(殺蟲劑)인 thiolix를 토양(土壤) 수분(水分) 조건(條件)과 약제(藥劑)의 농도(濃度) 및 토양(土壤) 미생물(微生物)의 영향에 의한 경시적(經時的) 분해(分解) 양상과 토양(土壤) 효소(酵素)에 미치는 영향을 실험(實驗)한 결과를 요약(要約)하면 다음과 같다. 침수토양(浸水土壤) 조건(條件)에서는 반 토양(土壤) 조건(條件)보다, 밭 토양(土壤) 조건(條件)에서는 수분(水分)이 많을수록 분해(分解)가 촉진되었고 반 토양(土壤) 조건(條件)에서 저농도(低濃度)는 고농도(高濃度) 처리구(處理區)에서보다 분해율(分解律)이 증가(增加)하였다. 살균(殺菌)토양(土壤)이 비살균(非殺菌) 토양(土壤)에서 보다 분해(分解)가 완만했고 포도당 첨가는 분해를 촉진시켰다. TLC와 GLC에 의해 90일 처리시료(處理試料)에서 확인(確認)된 분해산물(分解産物)로는 Thiolix alcoho, Thiolix sulfate, Thiolix ether 등(等)이 있고 미확인(未確認) 물질(物質) 하나가 검출 되었다. 토양(土壤) 효소(酵素) acid phosphatase의 활성(活性)은 처리농도(處理濃度)가 높은 구에서, 수분함량(水分含量)이 낮은 구에서 활성(活性)이 더 저하되었으며 포도당 첨가시엔 더욱 증가하는 경향이었고, urease와 dehydrogenase의 활성(활성)은 처리농도((處理濃度)가 높을수록 더욱 저하되었다.

• 대한치과기공학회지
• /
• 제31권3호
• /
• pp.21-26
• /
• 2009

Purpose: Standards of alloy for porcelain fused to metal crown be classified by metallic factor and biological factor. Metallic factors consist of stability of alloy composition and mechanical strength and surface characteristics for chemical bond. Biological factors be considered properties of metallic elements and problems originated by toxicity and hypersensitive reaction. Alloys considered such controversial points are the most suitable alloy for dental instrument. Method: Alloys added Be and Nb using Ni-Cr alloy which has been widely used for dental instrument be selected and classified experimental group. Non-addition Be and Nb to Ni-Cr alloy classify control group and addition Be alloy is Be-experimental group, addition Nb alloy is Nb-experimental group. Specimens for cytotoxicity analysis gave effect to washing and sterilization. and then made an experiment on elution with cell medium after disinfection. It conducted specimens within cell medium with 24hours, 48hours, 72hours, respectively. It cultured human dermal fibroblast(HDF) using cell medium for cytotoxicity test and then investigated elution rate through spectroscopic analysis by MTT-assay. Result: As results of cytotoxicity test by MTT-assay, cultured cell rate of VII measured more low numerical value within elution medium for 24hours focused on control group. Also, cultured cell rate of K3 alloys observed low value for 48hours, 72hours than value of control group. Conclusion: According to final result that synthesize above results, Ni-Cr alloy added Be and Ni has little difference in Cytotoxicity by MTT-assay.

• Archives of Plastic Surgery
• /
• 제36권2호
• /
• pp.183-187
• /
• 2009

Purpose: Because of the volume of elective sterilizations performed in the world during the past decade, the vasectomy was a popular method for male sterilization in Korea and this, in turn, had been followed by an increase in the number of patient requiring vasectomy reversal with the high rate of subsequent divorce and remarriage. Recently, many authors have reported high success rates of vasovasostomy using microsurgical techniques and we performed modified two layer vasovasostomy with intravasal silicone tube to increase postoperative patency and pregnacy rate. Methods: Microscopic vasovasostomy was performed in 9 patients and their average age was $35.78{\pm}1.36years$(from 28 years to 44 years) from June 2006 to June 2008 at our department using modified two layer vasovasostomy with silicone tube insertion. Standard Guibor silicone tube, consisting of two 17.7 cm, 0.064 cm diameter, malleable, stainless steel probes connected by 29 cm of silicone tubing wedged onto disposable probes, were used in all cases. Results: Success rates were 88.8 % for patency and pregnancy 44.4 % for pregnancy in modified two layer vasovasostomy with silicone tube insertion. The patency rates were higher in cases of long postoperative day and in cases of short duration of vasectomy and vasovasostomy. Conclusion: We used a modified method to correspond the patency and pregnancy rate in microscopical modified two layer vasovasostomy using the intravasal silicone tube permanently. This method brings normal patency in microsurgical vasovasostomy because the silicone tube prevent obstruction of anastomosed site of the vas permanently.

• 한국식품과학회지
• /
• 제36권3호
• /
• pp.416-422
• /
• 2004

본 연구에서는 전해 격막의 방식 및 재질, 전해액에 따른 전기분해수의 물리적 특성과 미생물의 표면살균 효과를 검토하였다. 격막 방식의 전기분해수 제조 시스템의 최적조건은 간극이 1.0mm, 20% NaCl 첨가량이 6mL/min 일 때 제조된 전기분해수의 물성치가 ORP 1,170mV 수준, HClO 함량 100ppm 수준, pH 2.5 수준으로 가장 우수하게 나타났으며, 1단 방식보다는 2단의 전기분해 방식이 물성 측면에서 우수함을 알 수 있었다. 무격막 방식의 전기분해수는 간극이 1.0mm, 20% NaCl 첨가량이 4mL/min 일 때 격막 방식의 최적조건과 가장 유사하게 나타났으나 차아염소산 함량은 132-266ppm 수준, pH는 9 수준으로 격막 방식과는 크게 달라지는 것을 알 수 있었다. 전극의 재질에 따른 성능을 평가한 결과, $IrO_{2}$ 및 Pt+Ir 재질의 극판이 산화환원전위 1,144-1,142mV 수준, 차아염소간 함량 190-235ppm 수준, pH 2.24-2.73으로 Pt 재질에 비해 물성치가 다소 높음을 볼 수 있으며 제조 수량도 가장 양호하게 나타났다. 전극판의 재질 특성에 따라 제조한 전기분해수의 미생물 살균효과는 Salmonella typhimurium을 제외한 나머지 3균주는 초기 $10^{7}-10^{9}CFU/mL$에서 30초 후에 모두 사멸되는 것으로 나타났으나, Salmonella typhimurium는 $IrO_{2}$ 재질에서는 1-2분 이내에 사멸되었다. 전해액으로 NaCl 및 $CaCl_{2}$, KCl을 사용하여 제조한 전기분해수의 ORP및 HClO 함량은 NaCl, KCl, $CaCl_{2}$ 순으로 높게 나타났으나 큰 차이는 없었으며, 미생물 사멸효과는 동일하게 나타났다.c}C$에서 발효한 비지장에서 glucose 함량이 높게 나타났다. 대두로 비지를 제조했을 때와 비지장의 발효과정 중 isoflavones 조성은 glucosides 함량은 감소하고 aglycones 함량은 증가하였으며 $40^{\circ}C$에서 발효한 비지장에서 그 증감의 폭이 컸다. 이상의 결과로부터 비지장의 맛과 인체 이용율에 바람직한 영향을 주는 요인이라 생각되는 ${\beta}-amylase$와 중성 protease 활성도, 단백질 분해율과 용해율, 유리 아미노산 총함량 및 조성, 환원당과 glucose 함량, genistein과 daidzein의 함량 등을 고려했을 때 품질이 우수한 비지장을 얻기 위해서는 $40^{\circ}C$에서 48시간 발효시키는 것이 바람직할 것으로 생각된다.. 환원당(還元糖)은 원기(元氣)가 가장 많고 도입(導入) 2호(號)가 가장 적었고 자당(蔗糖)은 칠복(七福)이 가장 많고 원기(元氣)가 가장 낮았으며 가용성전당(可溶性全糖)은 유심(琉心)이 가장 많고 천미(千美)가 가장 적었다. 3. 전단백질함량(全蛋白質含量)은 수원(水原) 147호(號)가 가장 높고 유심(琉心)이 가장 낮았으며 가용성단백질함량(可溶性蛋白質含量)은 칠복(七福)이 가장 높고 유심(琉心)이 가장 낮았으며 전단백질함량(全蛋白質含量)과 수용성단백질함량(水溶性蛋白質含量) 간(間)의 차이(差異)도 각각(各各) 상이(相異)하였다.& Inner part)의 순서등 5품종을 선정하였다. B. 숙성온도별 영향으로서 실온 $24{\sim}25^{\circ}C,\;30^{\circ}C,\;45^{\circ}C$ 별로 각 fine spirit에 oak chip을 넣고 숙성시킨 결과 $45^{\circ}C$에서 숙성시킨 것이 가장 숙성이 촉진 되었고

• Journal of Chest Surgery
• /
• 제13권4호
• /
• pp.475-485
• /
• 1980

For the past 5 year 6 months from January 1975 to June 1980, 176 patients with empyema have been treated in Chonnam University Hospital. They were 134 males and 42 females ranging from ] 8 days to 69 years of age. [mean age: 26.1 years] The duration of illness prior to treatment was relatively shorter in pediatric group than in adult group, that is, the duration of less than 1 month was 89.5% in pediatric group and 38.0% in adult group. In bacteria study there were Staphylococcus 26.1%, Streptococcus 17.6%, E. coil 10.8%, Pseudomonas 10.8%, Diplococcus pneumoniae 5.7% and Candidia. And 4 children and 3 adults had infections of two species of bacteria. The underlying pathologic lesions were pyogenic pneumonia 34.7%, tuberculosis 29.5%, paragonimiasis 15.3%, trauma 9.7% and postoperative state. The over-all mortality rate was 1.7% [3 patients]. The causes of death were sepsis In 1 child and sepsis secondary to esophageal fistula in 2 adults. Adequate drainage and obliteration of the pleural space seems to be the most important aspect of treatment and can frequently be achieved by initial tube drainage in acute empyema, especially in the pediatric group. The chronic thick walled or loculated cavities required open window therapy, decortication, resection therapy and sterilization. Modified Eloesser`s operation and 0.3-0.5% potadine irrigation brought good result in the patients who had general weakness, marked pulmonary parenchymal destruction due to pyothorax, and pyothorax with severe bronchopleural fistula.

• Preventive Nutrition and Food Science
• /
• 제20권1호
• /
• pp.60-66
• /
• 2015

The aim of this study was to determine the heat-penetration characteristics using stationary and rotary retorts to manufacture Kimchi soup. Both heat-penetration tests and computer simulation based on mathematical modeling were performed. The sterility was measured at five different positions in the pouch. The results revealed only a small deviation of $F_0$ among the different positions, and the rate of heat transfer was increased by rotation of the retort. The thermal processing of retort-pouched Kimchi soup was analyzed mathematically using a finite-element model, and optimum models for predicting the time course of the temperature and $F_0$ were developed. The mathematical models could accurately predict the actual heat penetration of retort-pouched Kimchi soup. The average deviation of the temperature between the experimental and mathematical predicted model was 2.46% ($R^2=0.975$). The changes in nodal temperature and $F_0$ caused by microbial inactivation in the finite-element model predicted using the NISA program were very similar to that of the experimental data of for the retorted Kimchi soup during sterilization with rotary retorts. The correlation coefficient between the simulation using the NISA program and the experimental data was very high, at 99%.

• 설비공학논문집
• /
• 제16권1호
• /
• pp.1-7
• /
• 2004

This study has been numerically conducted to investigate the removal efficiency of Volatile Organic Compound (VOC) for different photocatalytic honeycomb filters. Recently, the photocatalysis is being applied to air-cleaner, air-conditioner and vacuum-cleaner with the capability of air-purification, sterilization and antibiosis. However, photocatalysis is less efficient than other methods for removing VOC except in the case of low concentration. So far most of studies have focused on an improvement of the photocatalytic materials, but this study have placed emphasis on the improvements of shape of photocatalytic honeycomb filter. UV irradiation, concentration profile and pressure drop have been investigated for different cross sections of filters and for different filter lengths. Light intensity is dropped sharply with increasing distance from the UV-lamp, and becomes very low in the middle of the filters. Since photocatalytic reaction rate is a function of light intensity, VOC concentration gradient might be small in the middle of long filters. Thus, most of reaction have risen within only three times of dimensionless axial distance. These results can be used effectively for the design of advanced photocatalytic honeycomb filters.

• 한국주거학회논문집
• /
• 제19권1호
• /
• pp.79-88
• /
• 2008

Hot water is used by having a wash, dishes, taking tub and drinking water in residential buildings, and the use objective is to raise comfort of human body sense, washing and sterilization effect and so on. Cold & hot water supply system is understanded simpler than HVAC systems relatively, so it is true that pace of performance improvement is slower than other systems for plan and technical development. In this study, the performance evaluations are conducted under the condition of composition ratio by 1:1 for cold & hot water supply manifold system using functionally complex valves such as constant flow regulating valve and 3-way mixing valve in the area of $105.6m^2$ apartment which consist of the largest part of the whole apartment. Also, flow rate related to simultaneous use of faucets and change of hot water temperature are compared with the existing method.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.352-356
• /
• 2003

The objectives of this study were to investigate the influence of gamma irradiation for sterilization on poly(D,L-lactide-co-glycolide) (PLGA) with different molecular weight and the effect of gamma irradiation on the release behavior of 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, carmustine) from PLGA wafer with various irradiation doses. The effect of gamma irradiation on PLGA was evaluated by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and electron paramagnetic resonance (EPR). The weight average molecular weight (M$_{w}$) and glass transition temperature (T$_{g}$) of PLGA decreased after gamma irradiation. The extent of M$_{w}$ reduction was dependent on irradiation dose and PLGA molecular weight. Using EPR spectroscopy, we successfully detected gamma irradiation induced free radicals in PLGA. The gamma irradiation increased the release rate of BCNU from PLGA wafer at applied irradiation doses except 2.5 Mrad of irradiation dose in this study.study.