• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1637-1644
• /
• 2003

Stereoscopic particle image velocimetry is a measurement technique to acquire three dimensional velocity field by two cameras. With a laser sheet illumination, the third velocity component can be deduced from out-of$.$plane velocity components using a stereoscopic matching method. Most industrial fluid flows are three dimensional turbulent flows, so it is necessary to use the stereoscopic PIV measurement method. However the existing stereoscopic PIV system seems hard to use since it is very expensive and complex. In this study we have developed a Miniature Stereo-PIV(MSPIV) system based on the concept of the Miniature PIV system which we have already developed. In this paper, we address the design and some primitive experimental results of the Miniature Stereo-PIV system. The Miniature Stereo-PIV system features relatively modest performances, but is considerably smaller, cheaper and easy to handle. The proposed Miniature Stereo-PIV system uses two one-chip-only CMOS cameras with digital output. Only two other chips are needed, one for a buffer memory and one for an interfacing logic that controls the system. Images are transferred to a personal computer (PC) via its standard parallel port. No extra hardware is required (in particular, no frame grabber board is needed).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.2
• /
• pp.22-27
• /
• 2000

We present a sequential stereoscopic display system using volume holographic storage. Multiple angular multiplexed stereoscopic image pairs are recorded into a photorefractive crystal that can store data with high density, transfer them with high speed, and select a randomly chosen data element. The reference beam with Bragg selectivity is scattered by the index grating and the diffracted beams are propagating along the directions of the stereoscopic image pairs. The images are to be suitably projected on the left and right display plane sequentially for stereoscopic video viewing.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.265-272
• /
• 2001

The perceptual presentation of interior design is to represent an interior space planned by a designer as if people see it in reality. The perceptual presentation methods that have developed are perspectives, full-scathe models, small-scale models, photography of models, video taping of models, computer images, computer animation, and virtual reality. The purpose of this study is to investigate limits of those perceptual presentation methods according to their characteristics. The methods have characteristics that are either static or dynamic and either monoscopic or stereoscopic. In terms of representing interior spaces and perceiving interior spaces, the dynamic characteristic is more helpful than the static characteristic because the dynamic characteristic provides consecutively changing views of interior spaces when people walk around within the spaces. The stereoscopic characteristic is more helpful than the monoscopic characteristic because the stereoscopic characteristic provides the binocular depth perception. Full-scale models, small-scale models, virtual reality that have dynamic and stereoscopic characteristics, are most effective. The next effective methods are video taping of models and computer animation that have dynamic and monoscopic characteristics. The last effective methods are perspectives and photography each of models that haute static and monoscopic characteristics. But the most effective methods can nut be said that those are perfect because each of them still has limits. Designers have to consider the limits of each perceptual presentation method to find a way that shows their designs most effectively. To develop the perceptual presentation methods of interior design, researchers should focus on the helpful characteristics that are dynamic and stereoscopic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1938-1945
• /
• 2001

In this paper, a new scheme for image conversion of the 2D input images into the stereoscopic 3D images by using differential shifting method is proposed. First, the relative depth information is estimated by disparity and occlusion information from the input stereo images and then, each of image objects are segmented by gray-level using the estimated information. Finally, through the differential shifting of the segmented objects according to the horizontal parallax, a stereoscopic 3D image having optimal stereopsis is reconstructed. From some experimental results, it is found that the horizontal disparity can be improved about 1.6dB in PSNR for the reconstructed stereo image using the proposed scheme through comparing to that of the given input image. In the experiment of using the commercial stereo viewer, the reconstructed stereoscopic 3D images, in which each of the segmented objects are horizontally shifted in the range of 4 ∼5 pixels are also found to have the mast improved stereopsis.

• The KIPS Transactions:PartB
• /
• v.18B no.3
• /
• pp.139-146
• /
• 2011

The color correction is the important process of influencing on the picture quality of the 3D stereoscopic images. Existing colorcorrecting methods handle the processing intensifying a correspondence among a left and right image using a histogram based on any one side. In case of color correction based on a histogram, it is difficult to correct tone of image, because the color temperature is not converted enough. And in this paper, the color temperature correction and color consistency correction is proposed without using histogram. The proposed color correction method by color temperature gives 3 in CIE-${\Delta}E$ for each pixel on the images captured with same illuminants and the conventional gives similar results. For color consistency, the proposed gives 9 in CIE-${\Delta}E$ on the images captured with different illuminants while the conventional gives 18. The proposed method shows better results than the conventional in color consistency processing.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.362-371
• /
• 2013

This paper presents a framework of real-time augmented reality on 3-D mobile display with stereo camera tracking. In the framework, camera poses are jointly estimated with the geometric relationship between stereoscopic images, which is based on model-based tracking. With the estimated camera poses, the virtual contents are correctly augmented on stereoscopic images through image rectification. For real-time performance, stereo camera tracking and image rectification are efficiently performed using multiple threads. Image rectification and color conversion are accelerated with a GPU processing. The proposed framework is tested and demonstrated on a commercial smartphone, which is equipped with a stereoscopic camera and a parallax barrier 3-D display.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.115-121
• /
• 2013

Recently an extension to DMB AF (Digital Multimedia Broadcasting Application Format) standard has been proposed in such a way that the extended DMB AF can include stereoscopic video and stereoscopic images for interactive service data, i.e., MPEG-4 BIFS (Binary Format for Scene) data, in addition to the existing 2D video and 2D images for BIFS services. In this paper we developed a service that provides the streaming of 3D contents in DMB AF by using MPEG-DASH (Dynamic Adaptive Streaming over HTTP) standard and validated it by implementing the client software.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.5
• /
• pp.333-341
• /
• 2012

Modeling and simulation is important for military training. People can feel perspective when stereoscope images are created using multi-channel visualizations. A submarine oscillates when the submarine is just below the surface of the sea, so that the reconnaissance becomes difficult. Also, the operator should read the information of the target within 6 seconds using the periscope. The operator must have experience. To solve these problems, stereoscopic multi-channel visualization has been tested. The iCAVE system of KAIST provides a large-scale screen, 7 PCs, and 14 projectors to create the stereoscope images. To simulate the motion of a submarine just below the ocean surface, a 4-DOF motion platform is used. The motion data is transmitted to the visual system and the motion platform through the UDP protocol. Variety of weather conditions are created using the Vega Prime software. The stereoscopic multi-channel visualization and the motion platform system created a realistic simulation system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.360-362
• /
• 2010

In this paper, the next generation of digital video media attention to the 3D digital stereoscopic images can be most easily produced and minimize the cost for technology that can be made three-dimensional imaging technique, one of the leaf anaglyph research on methods through the low cost of the optimal representation of the three-dimensional stereoscopic images, and enjoy watching, a technique is proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1428-1436
• /
• 2012

This paper presents the delta image composition methods using Depth-Image-Based Rendering (DIBR) for 3D stereoscopic broadcasting for the low bandwidth mobile DMB broadcasting system. With DIBR, a left and depth images are transmitted to a mobile device, which restores the right view, whose quality may be poor. This paper describes delta image composition methods for the restoration while minimizing the amount of the transmitted data.