• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.363-370
• /
• 1999

When the first red tide alert by Cochlodinium polykrikoides was alarmed around the Oenarodo coast on Aug. 27, 1997, there co-occurred two chain-forming naked dinoflagellates which were different sized but looked fairly similar. The analyses of 24S rRNA sequences of these species showed that their gene sequences had only 74.9% identity. This low value implies that they are quite different species. After isolation and cultivation of each species, the morphological characteristics were observed. This revealed that the larger species ranging from 20 to 35 ${\mu}m$ was the well known, Cochlodinium polykrikoides and the smaller one ranging from 12 to 25 ${\mu}m$ was Gyrodinium impudicum which had not been reported in Korea. As their 24S rRNA sequences had not been analysed yet, we deposited the sequences in Genbank. At that time of the investigation. the red tide was caused by G. impudicum of which maximum cell counts reached up to 30,000 cells $ml^{-1}$. In this study we describe the morphological characteristics and the behavioral patterns of each species which can be easily observed with light microscope or stereomicroscope. In addition, their morphology transformed by the fixation with Lugol's solution are also characterized. which can help to discriminate each one in the fixed sample.

• Parasites, Hosts and Diseases
• /
• v.51 no.6
• /
• pp.703-710
• /
• 2013

To increase public health awareness for prevention of opisthorchiasis caused by eating raw freshwater fish, the distribution and abundance of Opisthorchis viverrini metacercariae (OV MC) was investigated in freshwater fish obtained from 20 provinces in northeastern Thailand between April 2011 and February 2012. A cross-sectional survey was conducted on 12,890 fish consisting of 13 species randomly caught from 26 rivers, 10 dams, and 38 ponds/lakes. Fish, were collected in each of the rainy and winter seasons from each province. Fish were identified, counted, weighed, and digested using pepsin-HCl. Samples were examined for OV MC by a sedimentation method, and metacercariae were identified under a stereomicroscope. OV MC were found in 6 species of fish; i.e., Cyclocheilichthys armatus, Puntius orphoides, Hampala dispar, Henicorhynchus siamensis, Osteochilus hasselti, and Puntioplites proctozysron from localities in 13 provinces. Among the sites where OV MC-infected fish were found, 70.0% were dams, 23.7% were ponds/lakes, and 7.7% were rivers. The mean intensity of OV MC ranged from 0.01 to 6.5 cysts per fish (or 1.3-287.5 cysts per kg of fish). A high mean intensity of OV MC per fish (>3 cysts) was found in 5 provinces: Amnat Charoen (6.5 cysts), Nakhon Phanom (4.3), Mukdahan (4.1), Khon Kaen, (3.5) and Si Sa Ket (3.4). In conclusion, OV MC are prevalent in natural cyprinid fish, with the infection rate varying according to fish species and habitats.

• Korean Journal of Veterinary Research
• /
• v.29 no.3
• /
• pp.373-381
• /
• 1989

The aim of the present study was to test the efficiency of estrous induction in the premature, metestrous and anestrous bitches. The estrus was induced with prostaglandin $F_{2{\alpha}}$, estradiol-$17{\beta}$, pregnant mare serum gonadotropin (PMSG) and human chorionic gonadotropin(HCG) in the treatment A, and with PMSG and HCG in the treatment B. Day 0 was the first day of estrone injection in the treatment A and the day of PMSG injection in the treatment B. Twenty three of the twenty six bitches were laparotomized under general anesthesia between 11 and 18 days after onset of behavioral estrus, whereas three bitches were not laparotomized and remained until parturition. Ovarian responses were evaluated with the total number of corpora lutea or ovulation sites. The uterine horns were flushed with phosphate-buffered saline added heat treated canine serum(10%), the flushing media was collected into watch glass and the ova were examined under stereomicroscope. The results obtained were as follows: 1. Standing estrus was observed on the day $17.7{\pm}1.5$ after injection of estrone in the treament A, but ovarian responses were not detectable. 2. Standing estrus was observed on the day $12.2{\pm}0.2$ after injection of PMSG in the treament Band 14 of 17 bitches showed ovarian responses. Ova were recovered in 9 of the 14 bitches. 3. Ovarian responses were observed in one of the three premature bitches. two of the three metestrous bitches and all of the 11 anestrous bitches. The average number of the ova collected from 9 bitchs were $12.2{\pm}1.4$. 4. Three bitches in the treament B exhibited behavioural estrus and all of them were mated with fertile male dog, resulting the pregnancy in only one bitch. The pregnant bitch gave the birth of two pups.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.2
• /
• pp.102-107
• /
• 1998

Solomon's seal (Polygonatum odoratum) seedlings raised through its seeds can replace the rhizomes impelling higher cost for transplanting, This experiment was done to determine the seed characteristics and the germinating processes to give some information on bulk production of seedlings using the seeds. The external or internal morphology of seeds or seedlings grown in lab. or greenhouse was examined mainly with stereomicroscope. The external shape of Solomon's seal seed was hard seed-coat and orthotropous ovule with linear type embryo stretching to the center of seed. Germination proceeded through the several steps. The lower part of seed embryo having the primordia of bulbil and roots first grew before the bulbil and roots was developed from the primordia. The lower part of embryo was enlarged toward the endosperm of seed as soon as seed germinated. Then epicotyl was formed on the apex of bulbil. The epicotyl was elongated after at least 6-week chilling treatment for breaking its dormancy and the first leaf shape was affected by light intensity given during seedling emergence. The bulbil was the first organ of the rhizome used as tea or herb medicine.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.55-66
• /
• 1999

The purpose of this study was to evaluate the microleakage of 5 current dentin bonding systems which are composed of 2 multi-bottle systems(Scotchbond Multi-Purpose, All Bond2) and 3 one-bottle systems(Single bond, One-Step, Prime & Bond). In this in vitro study, class V cavities were prepared on buccal and lingual surfaces of sixty extracted human premolars and molars on cementum margin. The experimental teeth were randomly divided into six groups of 10 samples (20 surfaces) each, Group 1 : Scotchbond Multi-Purpose ; Group 2 : All Bond 2 ; Group 3 : Single Bond ; Group 4 : One-Step ; Group 5 : Prime & Bond ; Group 6 : no bonding agent(control). The bonding agent and composite resin were applied for each group following the manufacturer's instructions. After 500 thermocycling between $5^{\circ}C$ and $55^{\circ}C$, the 60 teeth were placed in 2% Methylene blue dye for 24 hours, then rinsed with tab water. The specimen were embedded in clear resin, then sectioned buccolingually through the center of restoration with a low speed diamond saw. The dye penetration on each of the specimen were then observed with a stereomicroscope at ${\times}20$. The results of study were statistically analyzed using the Student-Newmann-Keul's Methods and the Mann-Whitney Rank Sum Test. The resin/dentin interfaces were examined under Scanning Electron Microscopy. The results of this study were as follows. 1. None of the dentin bonding systems used in this study showed significant difference in leakage values at both the enamel and the dentin margins (P>0.05). 2. In all groups except the control, leakage value seen at the enamel margin was significantly lower than that seen at the dentin margin (P<0.05). 3. Compared to the control group, all the groups treated with dentin bonding systems showed significantly lower leakage value at both enamel and dentin margins (P<0.05). 4. In the SEM view, gaps were observed in the composite resin / dentin interface in group 6 where no dentin bonding agent was used, and in all the other groups (group 1, 2, 3, 4, 5) composite resin, hybrid layer, and dentin were seen to be closely adhering to each other where there were no leakages. Well-developed resin tags 3~100${\mu}m$ in length infiltrated dentinal tubules past the hybrid layer and a hybrid layer 1~5${\mu}m$ thick had developed between the dentinal surface and the composite resin surface.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.222-232
• /
• 1999

The purpose of this study was to evaluate the effect of heated spreader on the sealing ability of lateral condensation, compared with regular cold spreader. Forty two extracted human teeth with single canal were randomly placed into 3 experimental groups, and four additional teeth were used as positive and negative controls. Each group was prepared with Ni-Ti Profile #40 using step-down technique and obturated with standardized colored gutta-percha cone by standard(cold) lateral condensation technique, warm lateral condensation technique with Endotec and hot spreader soaked in glass bead sterilizer, each with Sealapex sealer. Control groups were not obturated, but prepared. After 2 days in 2% methylene blue, the teeth were invested and made into transparent resin blocks. And then, each block was sectioned horizontally with microtome at 1, 2, 3, 4, 5 mm levels from the apex. The linear extent of dye penetration was examined with stereomicroscope at ${\times}$20 magnification. At each of 5 levels, ratio of the area of gutta-percha was obtained by calculating the area of gutta-percha to the total area of the canal. The data collected were then analyzed statistically using an analysis of variance(ANOVA) and Scheffe test. The results were as follows ; 1. All experimental groups produced the apical microleakage. 2. The mean leakage was 1.57${\pm}$0.76mm for cold spreader group, 0.86${\pm}$0.95mm for Endotec spreader group, and 0.64${\pm}$0.93mm for hot spreader group. The difference between hot spreader group and cold spreader group was statistically significant(p<0.05). 1. At the 1 mm level, the mean ratio of area of gutta-percha was 74.58${\pm}$13.15(%) for cold spreader group, 65.42${\pm}$14.62(%) for Endotec spreader group, and 80.72${\pm}$14.63(%) for hot spreader group. There was statistically significant difference between hot spreader group and Endotec spreader group(p<0.05). 2. At the 2mm level, the mean ratio of area of gutta-percha was 87.86${\pm}$11.22(%) for cold spreader group, 66.55${\pm}$14.02(%) for Endotec spreader group, and 92.93${\pm}$7.24(%) for hot spreader group. There was statistically significant difference between Endotec spreader group and other two spreader groups(p<0.05). 3. At the level 3, 4, 5 mm, there was no statistically significant difference between each group. Within the limits of the results of this experiment, warm lateral condensation technique with hot spreader soaked in a glass bead sterilizer demonstrated favorable apical sealing effect and improved density of gutta-percha mass. Thus, it is thought that this obturation technique is effective for clinical use and beneficial to reduce condensation forces, also economical and easy. Lateral condensation, Heated spreader, canal sealing, Microleakage.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.91-101
• /
• 1988

The purpose of this study was to evaluate Ultrasonic devices in root canal enlargement, about the effects on the canal shape and on the cutting ability beyond the curvature in curved canals. 180 resin blocks with $40^{\circ}$ curvature in apical third and 16mm long canal were made of epoxy resin and smooth broaches. These blocks were devided into six groups. According to the devices (ENAC$^{(R)}$, HARMOSONIC$^{(R)}$, Sonic Air MM 3000$^{(R)}$) and files (Zipperer file, H-file, Flexofile, K-file, Sharper file), five groups were instrumented one minute with # 15 files, then the enlarged size was measured. And # 20 files were used again in the same groups, then the enlarged size was measured. In control group, the time which was taken to enlarge the canal from # 15 to # 20 by hand technique was measured. The data was analyzed statistically. Then the enlarged shapes were evaluated in six groups with the stereomicroscope and recorded in ideal and non-ideal canal shape to compare the effects of ultrasonic devices on the canal shape. Only the ideal shaped canals were used in the study whether the cutting ability beyond the curvature in curved canals was, or not. The files with whole flutes, no flutes, and flutes in apical 5mm only were used. The weight differences of pre-and post-instrumentation by Sonic Air MM 3000$^{(R)}$ for two minutes were compared. The results were as follow: 1. Intracanal instrumentation for 1 minute with ultrasonic devices using # 15 and # 20 file in curved root canal of the epoxy resin block can not reach to the next file size. 2. Sonic Air MM 3000$^{(R)}$ shows higher cutting ability than the other two devices (p=0.001), however the percentage of non-ideal canal shape was the highest. 3. Two ultrasonic devices except Sonic Air MM 3000 considered normal in ideal canal shaping ability. 4. little cutting ability was shown beyond the curvature of curved canals.

• Parasites, Hosts and Diseases
• /
• v.34 no.4
• /
• pp.273-278
• /
• 1996

An epidemiologic survey along the several sites of southern coastal areas of Korean peninsula was performed to know the infection status of Pcnlotremc app. metacercariae in Tapes phiLlppirlawm. The clams were purchased from 13 coastal areas in Kyongsangnam- do alld Chollanam-do. in September, 1990. Each of them was digested with pepsin-HCI solution and examined under a stereomicroscope for the recovery of metacercariae. A total of 232 (77.3%) out of 300 examined clams were proved to have 1 to 273 Pawatrema app. metacercariae (54.7 in average). None of the clams from Samoan-myon Kosong-gun and Dolsan-up. Yochon-gun was infected with metacercariae. However, all of the clams from Yonghyon-myon, Sachon-guu, Dohwa-myon, Kohung-gun, Ahllyang-myon. Changhung- gun and Chiryang-myon. Kangiin-gun were infected with average 71, 31, 80 and 42 metacercariae respectively. Of the clams from Kohyon-myon, Namhae-gun, Doam-myon, Kangiin-gun and Kusan-myon. Uichang-guil examined, 97.5%. 95.0% and 90.0% were infected with about 117. 76 and 28 metacercariae. In other 4 surveyed areas. Seolchon rlyoll, Namhae-gun, Hwayang-myon. Yochon-gun Byollyang-myon, Sungju-gun and Bukpyong-myon, Haenam-gun. 55.0%-80.0% of clams were positive. and their average intensity of infection ranged from 6 to 25 metacercariae. From these results, it was confirmed that Tcpes philippincrum from southern coastal areas of Korea are highly infected by Parvatrema spp. metacercariae.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.136-141
• /
• 2016

In the present study, the distribution of glass particles inside 10 patrol cars of Chungnam Province has been studied. The target seats were front seats (driver’s seat, passenger’s seat) and the back seat. The target areas were the bottom of the seat (seat contacting buttocks, back of the seat, and the corner of the seat (the bottom and back attached part)). The target areas were tape lifted with an adhesive tape. The glass particles adhering to the adhesive tape were examined and counted under a stereomicroscope. The total number of glass particles found was 679. Among them, 471 (driver’s seat 293, passenger seat 178) were collected from front seats, which are usually occupied by police officers. The majority of glass particles were under 0.49 mm size. The results show that the majority of glass particles can be found on the front seats, rather than on the back seat. There is a high probability that glass particles found on the front seat adhere to police officers, so that to get further transferred to the convict upon physical contact (secondary transfer). Thus, there is a risk of misinterpretation of the value of glass evidence in the course of forensic examinations. Hence, a separate method to prevent cross contamination has to be prepared by police authorities as soon as possible.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.245-255
• /
• 2013

Identification of paint on victim's clothing and a vehicle are valuable for forensic examination when investigating hit-and-run accidents. Automotive paints on clothes are used to prove a victim caused by traffic accident and to identify a suspected vehicle. The comparison of transferred paints between victim's vehicle and suspected vehicle can be an important evidence in reconstructing the accident situation and in discovering the truth. The paints such as white, yellow, red, blue, or black are hard to examine particle shape under a stereomicroscope because of it is not included aluminum, pearl, and mica flakes in the pigments. The aim of this study under forensic aspect is to compare pigment among basecoat layers of solid paints by identifying inorganic elemental compositions and binder resins of pigments using by micro-FT-IR and micro-XRF spectrometer. The pigment samples were analyzed by using two methods of FT-IR: Reflectance and ATR method. Two methods of FT-IR were useful in discriminating binder resins of pigments by comparing characteristic peaks and patterns of spectra. Also, XRF spectrometer could identify the elemental compositions in inorganic pigments of trace paints which are difficult to compare the identification by FT-IR.