• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2A
• /
• pp.137-145
• /
• 2002

In the method of 3D modeling, stereo matching method which obtains three dimensional depth information from the two images is taken from the different view points. In general, it is very essential work for the 3D modeling from 2D stereo images to estimate the exact disparity through fading the conjugate pair of pixel from the left and right image. In this paper to solve the problems of the stereo image disparity estimation, we introduce a novel approach method to improve the exactness and efficiency of the disparity. In the first place, we perform a wavelet transformation of the stereo images and set the reference points in the image by the feature-based matching method. This reference points have very high probability over 95 %. In the base of these reference points we can decide the size of the variable block searching windows for estimating dense disparity of area based method and perform the ordering constraint to prevent mismatching. By doing this, we could estimate the disparity in a short time and solve the occlusion caused by applying the fried-sized windows and probable error caused by repeating patterns.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.59-67
• /
• 2005

This paper proposes method for determining exterior orientation parameters (EOPs) from the RPC mathematical camera model of the satellite image. SPOT satellite stereo pair is pre-tested using the proposed method. As results that, geopositioning errors are similar with those of the original EOPs. Differences between EOPs determined from the RPC and original EOPs were small. IKONOS Geo-level stereo pair is tested by the proposed method. Results of this method are compared with those of the RPC block adjustment method which have been verified in reported studies. Consequently, the proposed method showed accuracy similar to the RPC block adjustment method. The digital elevation models (DEMs) of sample area acquired by the two method almost did not have a difference.

• Journal of Korea Multimedia Society
• /
• v.19 no.9
• /
• pp.1647-1658
• /
• 2016

RGB+D database has been widely used in object recognition, object tracking, robot control, to name a few. While rapid advance of active depth sensing technologies allows for the widespread of indoor RGB+D databases, there are only few outdoor RGB+D databases largely due to an inherent limitation of active depth cameras. In this paper, we propose a novel method used to build outdoor RGB+D databases. Instead of using active depth cameras such as Kinect or LIDAR, we acquire a pair of stereo image using high-resolution stereo camera and then obtain a depth map by applying stereo matching algorithm. To deal with estimation errors that inevitably exist in the depth map obtained from stereo matching methods, we develop an approach that estimates confidence of depth maps based on unsupervised learning. Unlike existing confidence estimation approaches, we explicitly consider a spatial correlation that may exist in the confidence map. Specifically, we focus on refining confidence feature with the assumption that the confidence feature and resultant confidence map are smoothly-varying in spatial domain and are highly correlated to each other. Experimental result shows that the proposed method outperforms existing confidence measure based approaches in various benchmark dataset.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.1
• /
• pp.21-24
• /
• 2017

Passive millimeter wave (MMW) imaging penetrates clothing to detect concealed objects. The distances extraction to the concealed objects is critical for the security and defense. In this paper, we address a passive stereo 3 mm MMW imaging system to extract the longitudinal distance to the concealed object. The concealed object area is segmented and extracted by the k-means clustering algorithm with splitting initialization. The distance to the concealed object is estimated by the corresponding centers of the segmented objects. In the experimental two pairs (each pair for horizontal and vertical polarization) of stereo MMW images are obtained to estimate distances to concealed objects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.530-535
• /
• 2007

Disparity space image (DSI) technique is a method of establishing correspondence between a pair of images. It has a merit of generating a dense disparity map for each pixel. DSI has a cost function to be minimized, and it needs empirical weighting factors for occlusion penalty and match reward. This paper provides theoretical basis for the weighting factors, which depend on image noise and contrast between an object and background.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.75-85
• /
• 2013

To acquire depth information using stereo vision, it is required to find correspondence points between stereo image pair. Conventional stereo vision systems usually use two cameras to get disparity data. Therefore, conventional stereo matching methods cannot resolve the tradeoff problem between accuracy and precision with respect to the length of baseline. Besides, belief propagation method, which is being used recently, has a problem that matching performance is dependent on the fixed weight parameter ${\lambda}$. In this paper, we propose a modified belief propagation stereo matching technique based on multi-baseline stereo vision to solve the tradeoff problem. The proposed method calculates EMAD(extended mean of absolute differences) as local evidence. And proposed method decides weight parameter ${\lambda}$ adaptively to local texture information. The proposed method shows higher initial matching performance than conventional methods and reached optimum solution in less iteration. The matching performance is increased about 4.85 dB in PSNR.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.439-445
• /
• 2007

Stereoscopic viewing is an efficient technique for not only computer vision but also remote sensing applications. Generally, stereo pair obtained at the same time is necessary for 3D viewing, but it is possible to synthesize a stereomate suitable for stereo view with a single image and disparity-map. There have been researches concerning the generation of the synthetic stereomate from remote sensing imagery. However it is hard to find researches concerning the restoration of occlusion in stereomate. In this paper, we generated synthetic stereomates from remote sensing images, focused on the occlusion restoration. In order to figure out proper restoration methods depending on the spatial resolution of remote sensing imagery, we tested several methods including general interpolation and inpainting technique, then evaluated the results.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.156-166
• /
• 2014

As of 2014, KARI (Korea Aerospace Research Institute) operates two high-resolution satellites such as Kompsat-2 and Kompsat-3. Kompsat-3 has capability of in-track stereo images acquisition but it is quite limited because the stereo mode lowers the spatial coverage in a trajectory. In this paper we analyze the epipolar geometry from the heterogeneous Kompsat-2 and Kompsat-3 image combination to epipolar resample them for 3D spatial data acquisition. The analysis was carried out using the piecewise approach with RPCs (Rational Polynomial Coefficients) and the result showed the parabolic epipolar curve pattern. We also concluded that the third order polynomial transformation is required for epipolar image resampling. The resampled image pair showed 1 pixel level of y-parallax and can be used for 3D display and digitizing.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.683-686
• /
• 2005

This study addresses a photogrammetric approach to generate Mars topographic products from mapping data of Mars Global Surveyor (MGS). High-resolution stereo images and laser altimetry data collected from the MGS mission are combined and processed to produce Digital Elevation Models (DEM) and orthoimages. First, altimeter data is registered to high resolution images and considerable registration offset (around 325 m) is discovered on high resolution stereo images. Altimetry data, exterior orientation elements of the camera and conjugate points are used for bundle adjustment to solve this mis-registration and detennine the ground coordinates. The mis-registration of altimetry data are effectively eliminated after the bundle adjustment. Using the adjusted exterior orientation the ground coordinates of conjugate points are detennined. A sufficient number of corresponding points collected through image matching and their precise 3-D ground coordinates are used to generate DEM and orthoimages. A posteriori standard deviations of ground points after bundle adjustment indicate the accuracy of OEM generated in this study. This paper addresses the photogrammetric procedure: the registration of altimetry data to stereo pair images, the bundle adjustment and the evaluation, and the generation of OEM and orthoimages.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1445-1456
• /
• 2018

The purpose of this study is to compare the quality and characteristics of matching DEMs by using KOMPSAT-3 stereo pair capture in in-track and cross-track. For this purpose, two stereo pairs of KOMPSAT-3 were collected that were taken in the same area. The two stereo pairs have similar stereo geometry elements such as B/H, convergence angle. Sensor modeling for DEM production was performed with RFM affine calibration using multiple GCPs. The GCPs used in the study were extracted from the 0.25 m ortho-image and 5 meter DEM provided by NGII. In addition, matching DEMs were produced at the same resolution as the reference DEMs for a comparison analysis. As a result of the experiment, the horizontal and vertical errors at the CPs indicated an accuracy of 1 to 3 pixels. In addition, the shapes and accuracy of two DEMs produced in areas where the effects of natural or artificial surface land were low were almost similar.