DOI QR코드

DOI QR Code

Occlusion Restoration of Synthetic Stereomate for Remote Sensing Imagery

  • Kim, Hye-Jin (Department of Civil and Environmental Engineering, Seoul National University) ;
  • Choi, Jae-Wan (Department of Civil and Environmental Engineering, Seoul National University) ;
  • Chang, Ho-Wook (Department of Civil and Environmental Engineering, Seoul National University) ;
  • Ryu, Ki-Yun (Department of Civil and Environmental Engineering, Seoul National University)
  • Published : 2007.10.31

Abstract

Stereoscopic viewing is an efficient technique for not only computer vision but also remote sensing applications. Generally, stereo pair obtained at the same time is necessary for 3D viewing, but it is possible to synthesize a stereomate suitable for stereo view with a single image and disparity-map. There have been researches concerning the generation of the synthetic stereomate from remote sensing imagery. However it is hard to find researches concerning the restoration of occlusion in stereomate. In this paper, we generated synthetic stereomates from remote sensing images, focused on the occlusion restoration. In order to figure out proper restoration methods depending on the spatial resolution of remote sensing imagery, we tested several methods including general interpolation and inpainting technique, then evaluated the results.

Keywords

References

  1. Batson, R. M. and Edwards, K., 1976. Synthetic Stereo and LANDSAT Pictures, Photogrammetric Engineering and Remote Sensing, 42(10): 1279-1284
  2. Bethel J. S., 1991. Generation of synthetic stereo views from digital terrain models and digitized photographs, Proc. SPIE Conf. on Stereoscopic Displays and Applications II, San Jose, The USA, 1457: 49-53
  3. Chang, H., Kim, H, Lee, J., and Yu, K., 2006. Synthesis of stereo-mate through the fusion of a single aerial photo and LiDAR data, Proc. Conf. on ISRS 2006 PORSEC, Busan, Korea, CD-ROM
  4. Criminisi, A., Perez, P., and Toyama, K., 2003. Object removal by exemplar-based inpainting, Proc. IEEE Conf. on Computer Vision and Pattern Recognition, Madison, The USA, 2: 721-728
  5. Criminisi, A., Perez, P. and Toyama, K., 2004. Region filling and object removal by exemplar-based inpainting, IEEE Trans. Image Processing, 13: 1200-1212 https://doi.org/10.1109/TIP.2004.833105
  6. Dubois, E., 2001. A projection method to generate anaglyph stereo images, Proc. IEEE Conf. on Acoustics. Speech Signal Processing, Salt Lake City, USA, 3: 1661-1664
  7. Fehn, C., 2003. A 3D-TV Approach Using Depth-Image-Based Rendering (DIBR), Proc. Conf. on Visualization, Imaging, and Image Processing, Benalmadena, Spain, pp. 482-487
  8. Fehn, C., 2004. Depth-Image-Based Rendering (DIBR), Compression and Transmission for an New Approach on 3D-TV, Proc. SPIE Conf. Stereoscopic Displays and Virtual Reality Systems XI , San Jose, USA, pp. 93-104
  9. Ideses, I. and Yaroslavsky, L., 2005. Three methods that improve the visual quality of colour anaglyphs, Journal of Optics A: Pure and Applied Optics, 7(12): 755-762 https://doi.org/10.1088/1464-4258/7/12/008
  10. O'Neill, M. A. and Dowman, I. J., 1998. The generation of epipolar synthetic stereo mates for SPOT images using a DEM, Proc. 16th ISPRS Congress, Kyoto, Japan, vol.27, part B3, pp.587-598
  11. Roth, S. and Black, M. J, 2005. Fields of Experts: A Framework for Learning Image Priors, Proc. IEEE Conf. on Computer Vision and Pattern Recognition, San Diego, USA, pp. 860-867
  12. Salvi, S., 1995. Analysis and interpretation of Landsat synthetic stereo pair for the detection of active fault zones in the Abruzzi region, Remote Sensing of Environment, 53(3): 153-163 https://doi.org/10.1016/0034-4257(94)00039-P
  13. Scharstein, D., 1996. Stereo vision for view synthesis, Proc. IEEE Conf. on Computer Vision and Pattern Recognition, San Francisco, USA, pp852 -858
  14. Usery, E. L., 1993. Virtual stereo display techniques for three-dimensional geographic data, Photogrammetric Engineering and Remote Sensing, 59(12): 1737-1744