• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.504-507
• /
• 2005

본 논문에서는 직교식 스테레오 비젼을 이용하여 단일개체에 대한 움직임 추적결과를 3차원 좌표로 생성, 보정하는 기법을 제안한다. 먼저, 직교로 구성된 두 대의 카메라로부터 실시간으로 영상을 획득한 후, 각 영상에 대하여 차영상 기법과 ART2(Adaptive Resonance Theory 2)를 이용하여 움직이는 개체를 추출한다. 다음으로 추출된 정면, 상면 영상의 좌표를 통해 3차원 좌표로 생성할 수 있으나, 원근감 문제 등으로 좌표가 정밀하지 못하다. 그래서 추출된 두 영상의 좌표를 직교식 스테레오 비젼을 이용하여 좌표보정을 한 후 3차원 좌표를 생성한다. 제안된 방법을 통해 단일개체의 움직임에 대한 추적 결과가 3차원 좌표로 정밀하게 추출 되는지 실험을 통하여 검증하였다.

• 한국측량학회지
• /
• 제39권3호
• /
• pp.123-132
• /
• 2021

근거리 사진측량에서 스테레오 카메라를 이용하여 3차원 위치를 결정하기 위해 카메라의 내부표정요소뿐만 아니라 카메라 간의 상호표정요소를 결정하는 카메라 캘리브레이션이 선행되어야 한다. 카메라 캘리브레이션을 수행하고 나서 시간이 흐르면 비측량용 카메라의 경우 내부적인 불안정성이나 외부적인 요인에 의해 내부표정요소와 상호표정요소가 변할 수 있다. 본 연구에서는 스테레오 카메라 안정성을 평가하기 위해 두 대의 단일 카메라와 스테레오 카메라의 안정성을 분석뿐만 아니라 검사점을 이용하여 3차원 위치 정확도를 평가하였다. 4개월간 3회의 카메라 캘리브레이션을 수행한 실험을 통해 단일 카메라의 안정성을 평가한 결과 평균제곱근오차는 ±0.001mm로 나타났으며, 스테레오 카메라의 평균제곱근오차는 ±0.012mm ~ ±0.025mm로 나타났다. 또한, 검사점을 이용한 거리정확도를 평가한 결과 ±1mm로 나타나 다시기에 걸쳐 추정한 스테레오 카메라의 내부표정요소와 상호표정요소는 안정적인 것으로 판단되었다.

• Journal of Welding and Joining
• /
• 제19권2호
• /
• pp.200-207
• /
• 2001

Three-diemnsional bead profile was measured using the biprism stereo vision sensor in GMAW, which consists of an optical filter, biprism and CCD camera. Since single CCD camera is used, this system has various advantages over the conventional stereo vision system using two cameras such as finding the corresponding points along the horizontal scanline. In this wort, the biprism stereo vision sensor was designed for the GMAW, and the linear calibration method was proposed to determine the prism and camera parameters. Image processing techniques were employed to find the corresponding point along the pool boundary. The ism-intensity contour corresponding to the pool boundary was found in the pixel order and the filter-based matching algorithm was used to refine the corresponding points in the subpixel order. Predicted bead dimensions were in broad agreements with the measured results under the conditions of spray mode and humping bead.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.83-83
• /
• 2004

The analysis of relative pose(position and rotation) between stereo cameras is very important to determine the solution that provides three-dimensional information for an arbitrary moving target with respect to robot-end. In the space of free camera-model, the rotational parameters act on non-linear factors acquiring a kinematical solution. In this paper the general solution of active stereo that gives a three-dimensional pose of moving object is presented. The focus is to achieve a derivation of linear equation between a robot′s end and active stereo cameras. The equation is consistently derived from the vector of quaternion space. The calibration of cameras is also derived in this space. Computer simulation and the results of error-sensitivity demonstrate the successful operation of the solution. The suggested solution can also be applied to the more complex real time tracking and quite general and are applicable in various stereo fields.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.89-90
• /
• 2004

The analysis of relative pose(position and rotation) between stereo cameras is very important to determine the solution that provides three-dimensional information for an arbitrary moving target with respect to robot-end. In the space of free camera-model, the rotational parameters act on non-linear factors acquiring a kinematical solution. In this paper the general solution of active stereo that gives a three-dimensional pose of moving object is presented. The focus is to achieve a derivation of linear equation between a robot's end and active stereo cameras. The equation is consistently derived from the vector of quaternion space. The calibration of cameras is also derived in this space. Computer simulation and the results of error-sensitivity demonstrate the successful operation of the solution. The suggested solution can also be applied to the more complex real time tracking and quite general and are applicable in various stereo fields.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.224-229
• /
• 2007

This paper presents a camera calibration method using several images for three dimensional measurement applications such as stereo systems, mobile robots, and visual inspection systems in factories. Conventional calibration methods that use single image suffer from errors related to reference point extraction in image, lens distortion, and numerical analysis of nonlinear optimization. The camera parameter values obtained from images of same camera is not same even though we use same calibration method. The camera parameters that are obtained from several images of different view for a calibration target is usaully not same with large error values and we can not assume a special probabilistic distribution when we estimate the parameter values. In this paper, the median value of camera parameters from several images is used to improve estimation of the camera values in an iterative step with nonlinear optimization. The proposed method is proved by experiments using real images.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2313-2316
• /
• 2004

Accurate calibration effect for maladjusted stereo cameras with calibrated pixel distance parameter is presented. The camera calibration is a necessary procedure for stereo vision-based depth computation. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. No effective methods for such alignment have been presented before. Some amount of depth error caused from such non-parallel installation of cameras is inevitable. If the pixel distance parameter which is one of intra parameter is calibrated with known points, such error can be compensated in some amount and showed the variable experiments for accurate effects.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3856-3863
• /
• 2012

스테레오 영상으로부터 3차원 형상을 구현함에 있어 사용자의 개입을 최소로 필요로 하는 기법을 개발하였다. 형상구현은 특정 기하학 그룹을 평가하는 3단계로 이루어진다. 1단계는 영상에 존재하는 epipolar 기하 평가로 각 영상에서의 특정점들을 일치시킨다. 2단계는 소실점 방법을 이용하여 투영공간에서 특정평면을 찾는 affine 기하 평가이다. 3단계에서는 카메라의 자기보정을 포함하며 3차원 모델이 얻어질 수 있는 계량 기하 변수를 구한다. 이 방법의 장점은 형상구현을 위해 스테레오 영상을 보정할 필요가 없는 것으로, 그 구현가능성을 실증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.171-174
• /
• 2003

In this paper, we propose the method of stereo images composition using adaptive dense disparity estimation. For the correct composition of stereo image and 3D virtual object, we need correct marker position and depth information. The existing algorithms use position information of markers in stereo images for calculating depth of calibration object. But this depth information may be wrong in case of inaccurate marker tracking. Moreover in occlusion region, we can't know depth of 3D object, so we can't composite stereo images and 3D virtual object. In these reasons, the proposed algorithm uses adaptive dense disparity estimation for calculation of depth. The adaptive dense disparity estimation is the algorithm that use pixel-based disparity estimation and the search range is limited around calibration object.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.147-152
• /
• 1997

This paper presents a method for measuring and analyzing strains in sheet metal forming by stereo vision system. A better understanding and evaluation of the formability can be achieved by analyzing stain distribution in deformed sheet metals. By means of image processing technique, it is possible to get strain distribution efficiently. For measuring strain automatically and accurately, algorithms for camera calibration, grid detection, stereo matching and strain analysis has been developed and verified by experiments with GUI(Graphic User Interface).