• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.580-583
• /
• 2007

Various matching methods have been introduced by investigators to improve digital elevation model (DEM) accuracy of satellite imagery. This study proposed an area-based matching method according to land cover property using correlation coefficient of pixel brightness value between the two images for DEM generation from IKONOS stereo imagery. For this, matching line (where "matching line" implies straight line that is approximated to complex nonlinear epipolar geometry) is established by exterior orientation parameters to minimize search area. The matching is carried out based on this line. Land cover classes are divided off into water, urban land, forest and agricultural land. Matching size is selected using a correlation-coefficient image in the four areas. The selected sizes are $81{\times}81$ pixels window, $21{\times}21$ pixels window, $119{\times}119$ pixels window and $51{\times}51$ pixels window in the water area, urban land, forest land and agricultural land, respectively. And hence, DEM is generated from IKONOS stereo imagery using the selected matching sizes and land cover map on the four types.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.518-523
• /
• 2002

Nowadays the Rational Function Model (RFM), an abstract sensor model, is substituting physical sensor models for highly complicated imaging geometry. But RFM is algorithm to be required many Ground Control Points (GCP). In case of RFM of the third order, At least forty GCP are required far RFM generation. The purpose of this study is to research more efficient algorithm on GCP and accurate algorithm similar to RFM. The Polynomial Camera Model is relatively accurate and requires a little GCP in comparisons of RFM. This paper introduces how to generate Polynomial Camera Model and fundamental algorithms for construction of 3-D topographic data using the Polynomial Camera Model information in the Kompsat stereo pair and describes how to generate the 3-D ground coordinates by manual matching. Finally we tried to extract height information for the whole image area with the stereo matching technique based on the correlation.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.596-601
• /
• 2008

In this paper, we propose a new scheme to generate region-of-interest (ROI) enhanced depth maps in the hybrid camera system, which is composed of a low-resolution depth camera and a high-resolution stereoscopic camera. The proposed method creates an ROI depth map for the left image by carrying out a three-dimensional (3-D) warping operation onto the depth information obtained from the depth camera. Then, we generate a background depth map for the left image by applying a stereo matching algorithm onto the left and right images captured by the stereoscopic camera. Finally, we merge the ROI map with the background one to create the final depth map. The proposed method provides higher quality depth information on ROI than the previous methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.565-574
• /
• 2015

Recently, a medium-level representation named "Stixel" has been extensively researched in stereo vision-based environmental perception. Obstacle detection using Stixel representation consists of three steps: static Stixel generation, dynamic Stixel generation, and Stixel segmentation. This paper focuses on the Stixel segmentation step and has two contributions. One is that it shows that Stixel segmentation performance can be enhanced by utilizing both image domain and real world domain features. The other is that it suggests that parameters used for Stixel segmentation can be effectively tuned based on genetic algorithm. The proposed method was quantitatively evaluated and the result showed that the proposed method increased Stixel segmentation accuracy compared with the previous method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.45-51
• /
• 2003

Stereo bird's-eyes-view was prepared for 3-dimensional view of various forms of Jecheon city, and 3-dimensional simulation was applied to it so as to show it in moving pictures in spatial. In manufacturing stereo bird's-eyes-view, perspective technology was used in image-making technology, and the basic material images are prepared as fellows: used EOC Images from Arirang-1 satellite, created DEM whose error was optionally geometric corrected after drawn from the contour line of the map on a scale of l/5,000 manufactured by national geography institute as a national standard map, and classified road lines which were manufactured as a road layer vector file of a map on a scale of l/l,000 and then overlay it over the three dimensional image of target area. Especially for the connectivity with address system to be used in new address, an arterial road map on a scale of l/l,000 that had been manufactured to grant new address was used in maximum in road network structure data of city area in this study.

• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1518-1525
• /
• 2021

Due to the growth of VR industry and rise of digital twin industry, the importance of implementing 3D data same as real space is increasing. However, the fact that it requires expertise personnel and huge amount of time is a problem. In this paper, we propose a system that generates point cloud data with same shape and color as a real space, just by scanning the space. The proposed system integrates 3D geometric information from lidar and color information from stereo camera into one point cloud. Since the number of 3D points generated by lidar is not enough to express a real space with good quality, some of the pixels of 2D image generated by camera are mapped to the correct 3D coordinate to increase the number of points. Additionally, to minimize the capacity, overlapping points are filtered out so that only one point exists in the same 3D coordinates. Finally, 6DoF pose information generated from lidar point cloud is replaced with the one generated from camera image to position the points to a more accurate place. Experimental results show that the proposed system easily and quickly generates point clouds very similar to the scanned space.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.401-413
• /
• 2019

The purpose of this study is to generate DSM using the stereo matching algorithm of worldview-1 stereo images and verify the accuracy of the generated DSM. To generate DSM, RPC block modeling was performed to correct RPC errors, and image matching was performed using SGM, which is a stereo matching algorithm after the epipolar image was generated. The COST for SGM was calculated by using CENSUS, and 4-paths and 8-paths were applied for COST aggregation in SGM. To verify the quality and accuracy of the generated DSM, it was compared with the LiDAR-derived DSM and the DSM generated by commercial SW. The results showed that the vertical accuracy of the generated DSM using 4-paths of COST aggregation was 1.647 m to 3.689 m (RMSE). In case of using 8-paths of COST aggregation was 1.550 m to 3.106 m (RMSE).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.359-365
• /
• 2008

This paper focused on generation of more accurate DEM and analysis of accuracy. For this, we applied suitable sensor modeling technique for each satellite image and automatic pyramid matching using image pyramid was applied. Matching algorithm based on epipolarity and scene geometry also was applied for stereo matching. IKONOS, Quickbird, SPOT-5, Kompsat-2 were used for experiments. In particular, we applied orbit-attitude sensor modeling technique for Kompsat-2 and performed DEM generation successfully. All DEM generated show good quality. Assessment was carried out using USGS DTED and we also compared between DEM generated in this research and DEM generated from common software. All DEM had $9m{\sim}12m$ Mean Absolute Error and $13m{\sim}16m$ RMS Error. Experimental results show that the DEMs of good performance which is similar to or better than result of DEMs generated from common software.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.949-959
• /
• 2020

In this paper, as a prior study related to the generation of topographic information using the CAS500-1/2 satellite, we propose a method of extraction DSM for each 1:5000 scaled map in North Korea using KOMPSAT-3A strip images. This technique is designed to set the processing area by receiving shape file, only to generate output for every 1:5000 scaled map. In addition, dense point clouds and the DSM were extracted by applying MDR, a robust stereo image matching technique. Considering that the strip images are input in the units of scenes, we attempted to extract a DSM by processing and merging multiple image pairs in one 1:5000 map area. As a result, it was possible to confirm the generation of an integrated DSM with minimal separation at the junction, and as a result of the accuracy analysis, it was confirmed that the accuracy was within 5m compared to GCP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.201-208
• /
• 2015

3D image must have depth image for depth information in order for 3D realistic media broadcasting. We used generally belief propagation algorithm to solve probability model. Belief propagation algorithm is operated by message passing between nodes corresponding to each pixel. The high resolution image will be able to precisely represent but that required much computational complexity for 3D representation. We proposed fast stereo matching algorithm using belief propagation with multi-resolution based wavelet or lifting. This method can be shown efficiently computational time at much iterations for accurate disparity map.