• 항공우주시스템공학회지
• /
• 제9권4호
• /
• pp.37-42
• /
• 2015

The CubeSats is classified as a pico-class satellite which requires a ground station to track the satellite, transmit commands, and receive an on-orbit data such as SOH (State-of-Health) and mission data according to the operation plan. In order to this, the ground station system has to be properly designed to perform a communication to with the satellite with enough up- and down-link budgets. In this study, a conceptual design of the ground station has been performed for the CubeSat named as STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project). The paper includes a ground station hardware interface design, a link budget analysis and a ground station software realization. In addition, the operation plan of the ground station has been established considering the STEP Cube Lab. mission requirements.

• 한국공간구조학회논문집
• /
• 제4권2호
• /
• pp.81-88
• /
• 2004

동적 불안정 좌굴현상에 관한 연구는 다소 발표되고 있으나, 주기성을 가진 하중하에서의 동적 좌굴을 다룬 연구는 그리 많지 않은 편이다. 주기성을 가진 하중하에서의 거동은 STEP 하중하에서의 거동과는 매우 다르리라 예상된다. 본 논문에서는 동적 불안정의 기본 메커니즘을 파악하기 위하여 양단 핀으로 고정된 정현형 아치가 정현형 조화하중을 받았을 때의 얕은 아치를 대상으로 한다. 얕은 아치의 동적 간접 좌굴 메커니즘을 파악하기 위하여 STEP 하중뿐만 아니라 정현형 조화하중일 때를 대상으로 한다. 동적 비선형 응답 특성을 알기 위하여 수치적분에 의해 기하학적 비선형 운동방정식을 유도한다. 여기서 얻어진 비선형 변위 응답으로 FFT(Fast Fourier Transform)에 의한 연속 응답 스펙트럼을 구해 동적 불안정 특성에 관해서 분석한다.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.994-1001
• /
• 2001

본 논문에서는 이동 통신 시스템에서의 PIC기법으로 간섭을 제거하여 개선된 SIR을 기반으로 하는 전력 제어 방식을 제안한다. 일반적으로 전력 제어는 SIR을 기반으로 하는 방식이 사용되고 있다. 그러나 이 방식은 시스템의 안정성을 떨어뜨리는 Positive Feedback 현상을 발생시킨다. 따라서 제안된 전력 제어 기법은 SIR의 변수인 간섭신호를 감소시켜 개선된 SIR을 기반으로 하는 전력제어를 수행하여 시스템의 안정화를 도모하였다. 또한 이동국에서 기존의 Up-Down전력 명령대신 Up-Maintain-Down기법을 이용하여 성능을 향상시켰다. 새로운 전력 제어 기법인 개선된 SIR방식과 기존의 방식을 모의 실험을 통하여 비교, 제안된 시스템의 성능 개선을 확인했다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.119-119
• /
• 2010

Among the various factors influencing the service life of the electric equipment, the performance of dielectric insulation materials has an important role to determine their whole service life. In order to determine the degradation of insulating materials immersed in extremely low temperature media such as liquid nitrogen, the abrupt temperature change from cryogenic to normal room temperature should be considered. But the assessments of low-temperature aging test method for the dielectric materials immersed in liquid nitrogen considering these conditions were not fully reported. Therefore, for the fundamental step to establish the suitable degradation test methods for cryogenic dielectric materials, we focused on the evaluation of ageing test methods for dielectric materials exposed to low temperature environments considering thermal shock by cool-down and warm up test.

• 에너지공학
• /
• 제23권4호
• /
• pp.150-159
• /
• 2014

2020년을 목표로 한 국내 중기 온실가스 감축목표가 2009년에 발표된 이후 다양한 온실가스 방안들이 제시되고 있다. 장기적인 온실가스 감축 정책들을 체계적으로 평가하기 위해 대부분의 국가에서는 상향식 모형 또는 하향식 모형이 이용이 되고 있다. 본 연구에서는 상향식 모형의 일반적인 현황 및 적용방안에 대해서 알아보고, 또한 가장 많이 사용되는 LP를 이용한 상향식 모형에 대한 이론적 고찰을 수행하였다. 특히 새롭게 제시된 단순화된 LP 정식화를 제시하기 위해, 의사결정변수 분석, 목적함수에 대한 분석, 기본적인 제약식인 흐름보존제약 및 용량제약에 대한 보다 간결한 정식화를 제시하고 있으며, 다양한 시나리오나 정책의 효과를 LP에 포함시킬 수 있도록 선형제약식을 만드는 방법도 제시하고 있다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제7권
• /
• pp.91-100
• /
• 1999

This paper investigates ventilation characteristics of an environmental chamber simulating an under-floor air conditioning system for isothermal and cooling supply air conditions. The tracer gas sulfur-hexafluoride (SF$F_6$) was injected into a supply duct using step-up and step-down methods. Local mean and room mean ages were calculated from the concentrations measured at internal points and at the exhaust duct. The air change efficiency of the chamber has been found to be greater in cooling conditions than in isothermal conditions. Also the room air change efficiency is not significantly affected but slightly improved by the presence of a supply diffuser.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.860-868
• /
• 2016

A bidirectional DC-DC converter (BDC) is an indispensable electrical unit for the electric vehicles (EVs). High efficiency, high power density, isolation, light weight and reliability are all essential requirements for BDC. In this paper, a 3 kW BDC for the battery charger of EVs is proposed. The proposed converter consists of a half-bridge structure on the primary side and an isolation transformer and a synchronous rectifier structure on the secondary side. With this topology, minimum number of switching devices are required for bidirectional power flow between the two dc buses of EVs. The easy implementation of the synchronous rectification gives advantages in terms of efficiency, cost and flexibility. The proposed BDC achieves high efficiency when operating in both modes (step-up and step-down). A 3 kW prototype is implemented to verify theoretical analysis and the performance of the proposed converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.160-162
• /
• 2020

A control technique for the auxiliary buck/boost converter is proposed herein to improve the load transient response of the buck converter. The proposed technique improves the system efficiency by enabling the soft switching operation of the auxiliary converter. The design guidelines for achieving capacitor charge balance for the output capacitor during the transient are also presented herein. The experimental results revealed that the output voltage undershoot and settling time during the load step-up transient were 40 mV and 14 ㎲, respectively, and the output voltage overshoot and settling time during the load step-down transient were 35 mV and 21 ㎲, respectively. The performance and effectiveness of the proposed technique were experimentally verified using a prototype buck converter with a 15-V input, 3.3-V output, and 200-kHz switching frequency.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.343-350
• /
• 2006

This paper introduces a new high efficient bi-directional, non-isolated DC/DC converter. Through variations of the topology of the conventional Cuk converter, an optimum bi-directional DC/DC converter is proposed. Voltage and current in the proposed DC/DC converter are continuous. Furthermore, the efficiency in both step-up and step-down mode is improved over that of the conventional bi-directional converter. To prove the validation for the proposed converter, simulations and experiments are executed with a 300W bi-directional converter.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1049-1053
• /
• 2007

Cogged belts get unpleasant noise when the speed is up and down. This paper investigates optimum condition for reducing a belt noise that is caused by a belt shape and properties of the material. Order tracking is used analyze belt noise. First step, the pitch length exerts an important influence on the order noise. Second step, material of belt is also important for reducing noise level. The experimental results showed the modified form and material of belts to reduce the noise.