• Clinics in Shoulder and Elbow
• /
• 제19권3호
• /
• pp.125-129
• /
• 2016

Background: Superior migration of humeral head has been conventionally determined by measuring the acromiohumeral distance (AHD), We sought to devise a novel measurement system more reliably and accurately than AHD. We described a structural landmark called 'C-line'. In this study, we investigated the clinical usefulness of 'step-off of the C-line (SOC)' compared to that of AHD. Methods: The C-line formed from the medial margin of the proximal humeral head continuing up to the inferior margin of the articular glenoid and then to the lateral border of the scapula. The superior migration of the humeral head triggered by a rotator cuff tear introduces a discontinuity in this C-line. We measured the distance of this discontinuity. We enrolled 144 patients who underwent a rotator cuff repair. We selected 58 controls who didn't have any cuff lesions apparent on magnetic resonance imaging. Using radiographs derived from standardized true anteroposterior views of the shoulder, we measured the SOC and the AHD. We used t-tests for statistical analyses. Results: A rotator cuff tear was associated with an increase in SOC and a decrease in AHD. In control group, the mean SOC was $1.29{\pm}1.71mm$ and AHD was $9.71{\pm}2.65mm$. In cuff tear group, the mean SOC was $3.15{\pm}3.41mm$ and AHD was $8.28{\pm}1.76mm$. The mean SOCs of the patient group in relation to the mean SOC of the control group according to tear size, the SOCs of medium tear and lager groups showed statistically significant increase (p<0.05). Conclusions: The SOC may be a similarly effective to diagnose cuff tears of medium size and larger compared with AHD.

• 산업기술연구
• /
• 제35권
• /
• pp.3-8
• /
• 2015

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step(sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased by the second step(rolling process of sintered plate ; Series B). After the third step(re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process effects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at junction between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• 산업기술연구
• /
• 제31권A호
• /
• pp.45-51
• /
• 2011

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step (sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased at the second step (rolling process of sintered plate ; Series B). After the third step (re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process affects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at interface between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• 전자공학회논문지C
• /
• 제36C권4호
• /
• pp.87-94
• /
• 1999

본 논문은 필기체 한글인식에 적합한 모듈화된 부분연결 다층신경회로망 구조를 제안한다. 세가지 특징 벡터들에 대한 세 개의 부분연결 다층신경회로망 인식기를 구성하고 이를 통합하기 위한 또 하나의 부분연결 신경회로망을 결합시킴으로써 인식률을 높일 수 있도록 설계하였다. 각각의 부분연결 다층신경회로망은 한글의 이차원적 특징을 잘 반영할 수 있도록 입력층을 10개의 수용영역으로 분할하고 입력층과 은닉층 사이를 부분 연결하였다. 결합단계에서 새로운 부분연결 신경회로망을 도입하고, 그 입력으로 이미 학습된 세 개 인식기의 은닉층 출력을 이용하여 재학습한다. 제안된 인식기의 성능을 평가하기 위해서 전표처리에 많이 사용되는 한글 문자 18개를 선정하여 평가하였다.

• 한국실천공학교육학회논문지
• /
• 제3권1호
• /
• pp.84-91
• /
• 2011

급변하는 산업 환경에 대응하여 보다 경쟁력 있는 공학인의 양성이라는 측면에서 경영 마인드를 함양시키는 공학 소양 교육의 필요성이 대두 되고 있다. 본 연구에서는 공과대학 교육 내실화와 수요자 중심의 공학교육과정 개발, 공학교육인증 획득의 필요성 증대에 부응하여, 산업체에서 요구하는 경영마인드를 갖춘 공학도의 양성을 목표로 공학도를 위한 경영학 교과목 개발 사례를 고찰하였다. 교과목 개발 및 운영전략으로 강좌 간 강의품질 편차의 최소화를 위해 표준화된 온라인 콘텐츠와 교안을 개발하였으며, 학습효과를 극대화하기 위해 온 오프라인 혼합강의를 구현하여 적용하였다. 본 연구의 결과 및 교과내용과 교수방식은 타 공학대학의 공학경영교육 설계 시 참조모델로서 효과적으로 적용될 수 있다.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.415-423
• /
• 1996

Thin film technologies for fabricating SQUIDs involve etching and deposition procedures with the proper substrate materials and $YBa_2Cu_3O_{7-d}$ (YBCO) as the high $T_c$ superconductor. YBCO were prepared on various substrates of MgO, $SrTiO_3$, and $LaAlO_3$ by using off-axis magnetron sputtering methods and annealing in-situ. The parameters of film fabrication processes had been optimized to yield good quality films in terms of the critical temperature $T_c$ and the critical current density $J_c$. The optimized processes yielded $T_C$>90K along with $J_c$>$10_6A$$extrm{cm}^2$ at 77K and>$2\times10_7A/Cm^2$ at 5K. We fabricated step-edge type dc-SQUIDs and directly coupled magnetometers, producing step edges on MgO(100) substrates by etching with Ar-ion beam, depositing YBCO material on them, then patterning them by using ion-milling technique. Circuitizing washer-shape SQUIDs to possess a pair of step-edge junctions of 2-5$\mu$ line width with a high angle>$50^{\circ}C$ , we examined their I-V characteristics thoroughly and Shapiro steps clearly as we irradiate microwaves of 8-20 GHz frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.187-188
• /
• 2007

This paper describes a simple and high-performance LDO regulator designed using a $0.18{\mu}m$ CMOS process. It is designed to provide a regulated voltage for on-chip small loads instead of for off-chip heavy loads. Since the load capacitance is very small in this applications, the frequency compensation can be easily achieved without a buffer. The designed LDO drives a load current up to 15mA and dissipates only 12uA quiescent current. The line regulation is and the load regulation is for a 9mA load step. The PSRR at 10kHz is 54dB.

• 전자공학회논문지C
• /
• 제35C권6호
• /
• pp.56-66
• /
• 1998

본 논문은 비최소 위상 시스템을 보다 효율적으로 제어하기 위하여 기존의 PID 타입의 선형 제어기와 병렬적으로 구성된 신경망 제어기의 구성에 대하여 다룬다. 제안된 제어기의 제어 목표는 비최소 위상 시스템의 제어의 경우 흔히 나타나는 언더슛 현상을 최소화하면서 설정된 시스템 응답과의 응답 오차가 최소화하는 것이다. 전체 비용 함수는 고려된 두 가지의 개별 목적 함수간의 선형 합으로 이루어 진다. 신경망 제어기는 주어진 전체 제어 시간 동안의 제어 성능을 광역 평가를 통하여 주어진 전체 비용 함수를 최소화하는 최적 제어기를 구성하도록 진화 프로그래밍을 이용하여 off-line으로 학습된다. 일반적인 컴퓨터 모의 실험으로 계단 신호 응답에서 나타나는 빠른 settling 시간, 작은 언더슛과 오버슛과 같은 제어 성능 향상의 관점에서 기존의 선형 제어 시스템의 성능에 비해 훨씬 효과적이라는 것을 보인다. 또한, 파렛토(pareto) 다중 최적화 개념을 도입하여 선형 합으로 이루어진 비용 함수 최적화의 한계성과 문제점을 극복한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.635-642
• /
• 1989

We formulated the multi-robot trajectory problem into a series of NLP problem, each of which is that of finding the optimal tip positions of the robots for the next time step. The NLP problem is composed of an objective function and three constraints, namely: a) Joint position limits, b) Joint velocity limits, and c) Collision-avoidance constraints. By solving a series of NLP problem, optimally coordinated trajectories can be determined without requiring any prior path information. This is a novel departure from the previous approach in which either all paths or at least one path is assumed to be given. Practical application of the developed method is for optimal synthesis of multiple robot trajectories in off-line. To test the validity and effectiveness of the method, numerical examples are illustrated.

• 한국산업융합학회 논문집
• /
• 제8권2호
• /
• pp.69-76
• /
• 2005

This study for Customer Satisfaction(Customer Focus) by Profit security' in the field Process improvement activity and man-power upgrade by DAS(DATA Acquisition System) in the Plant that is fusion Off Line and On Line(IT), Especially the basic of the most foundation in the beginning Step of Toyota system is 3-jeong(a standard instrument; right volume, right box, right position), 5S(Seiri, Seiton, Seisoh, Seiketsu, Sitsuke ; KAISEN, KANBNA System(for Logistic), Further more KPC has established the digital environment such as CIM ; Computer Integrated Manufacturing), IMS ; Intelligent Manufacturing System ERP ; Enterprise Resource Planning, DAS; Data Acquisition System, Autonomous QC & SPC etc,.) in order to realize the intelligent informatization, which is core base for obtaining the competitive power and for responding to the various 21C management environment in flexibility. In this digital management environment, continuously and powerfully they would advance for becoming the best of the world. For strategic changes to take place in industry 3 key important factors need to be included ; Integration of tasks function and process, Decentralization of information, Responsibility, Finally simplification of products and product structures.