• 한국의상디자인학회지
• /
• 제23권4호
• /
• pp.105-116
• /
• 2021

Pillows are tools that humans have used for a long time to sleep or lie down and rest. It is bedding, and the oldest literature dealing with it is Volume 29 of 'GoryeoDogyeong', which describes embroidered pillows. The oldest relic is the queen's pillow (National Treasure No. 164) excavated from the tomb of King Muryeong, and is in the Gongju National Museum. This study attempts to investigate and reproduce the materials used in traditional pillows Yukgol pillows and pine nut pillows designs are based on literature and artifacts from the Joseon period to modern times. Regarding the research method, after reviewing literature and the relics of traditional pillows, the process of reproducing the traditional Yukgol pillow and the pine nut pillow production method were explained step by step. This study found the plain attitudes in the lives of people who used materials that could be easily gained from their daily lives in rural communities oriented to rice farming never recklessly threw out any piece of cloth or cotton and use it for pillow stuffing or pillow ends. Also, the sophisticated sense of aesthetics that you can see from the pine nut pillows, whose ends were made of remnants from making clothing are exquisitely similar to what was shown in patchwork previously. The biggest meaning of restoring traditional pillows was looking into traditional culture, particularly the ordinary people's living culture. It was very difficult because the researcher had to find materials that were difficult to obtain in this age, the making process was complex, and it took much time; however, it is significant in that the restoration of traditional pillows allows for the succession of tradition.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권2호
• /
• pp.23-26
• /
• 2007

The influence of water partial pressure in Metal-organic Deposition (MOD) method was investigated on the texture and the morphology of $YBa_2Cu_3O_{7-x}$ (YBCO) films grown on the buffered metal tapes. The water partial pressure was varied from 4.2% up to 10.0% with the other process variables, such as annealing temperature and oxygen partial pressure, kept constant. In this work, the fluorine-free Y & Cu precursor solution added with Sm was synthesized and coated by the continuous slot-die coating & calcination step. The next annealing step of the YBCO films was done by the reel-to-reel method with the gas flowed vertically down. From the x-ray diffraction analysis, the un-reacted phase like $BaF_2$ peak was found at the water partial pressure of 4.2%, but $BaF_2$ peak intensity is much reduced as the water partial pressure is increased. However, the higher water partial pressure of about 10% in this experiment leads to the poor crystallinity of YBCO films. The morphologies of the YBCO films were not different from each other when the water partial pressure was varied in this work. The maximum critical current density of 3.8MA/$cm^2$ was obtained at the water partial pressure of 6.2% with the annealing temperature of 780$^{\circ}C$ and oxygen partial pressure of 500ppm.

• 대한산업공학회지
• /
• 제16권2호
• /
• pp.135-147
• /
• 1990

A nuclear power plant can be viewed as a large complex man-machine system where high system reliability is obtained by ensuring that sub-systems are designed to operate at a very high level of performance. The chance of severe accident involving at least partial core-melt is very low but once it happens the consequence is very catastrophic. The prediction of risk in low probability, high-risk incidents must be examined in the contest of general engineering knowledge and operational experience. Engineering knowledge forms part of the prior information that must be quantified and then updated by statistical evidence gathered from operational experience. Recently, Bayesian procedures have been used to estimate rate of accident and to predict future risks. The Bayesian procedure has advantages in that it efficiently incorporates experts opinions and, if properly applied, it adaptively updates the model parameters such as the rate or probability of accidents. But at the same time it has the disadvantages of computational complexity. The predictive distribution for the time to next incident can not always be expected to end up with a nice closed form even with conjugate priors. Thus we often encounter a numerical integration problem with high dimensions to obtain a predictive distribution, which is practically unsolvable for a model that involves many parameters. In order to circumvent this difficulty, we propose a method of approximation that essentially breaks down a problem involving many integrations into several repetitive steps so that each step involves only a small number of integrations.

• 정보처리학회논문지A
• /
• 제11A권1호
• /
• pp.97-108
• /
• 2004

본 논문은 자바 프로그램에서 논리적인 오류를 발견하기 위해 알고리즈믹 디버깅 기술의 이용을 제안한다. 알고리즈믹 디버깅 기술은 원시프로그램으로부터 실행 트리를 생성하고, 실행 트리로부터 프로그램 내에 포함된 논리적인 오류를 하향식 방법으로 발견하는 반자동화 디버깅기술이다. 따라서 알고리즈믹 디버깅 기술은 다양한 프로그래밍 언어에 알맞은 실행 트리를 생성하는 것이 중요하다. 주 논문에서는 자바 프로그램으로부터 실행 트리를 생성하는 방법을 제안하고 예제론 통해서 자바 프로그램을 위한 알고리즈믹 디버깅 기술을 확인한다. 이 접근은 전통적인 순차적 디버깅 기술보다 사용자와 디버깅 시스템 사이에서 상호작용의 수를 줄일 수 있다.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.97-102
• /
• 2005

The procedure of semi-solid forming is composed of heating a billet, forming, compression holding and ejecting step. There are several methods to heat a billet during semi-solid forming process such as electric heating and induction heating. Usually in semi-solid forming process, induction heating has been adopted to achieve more uniform temperature of semi-solid material. Although induction heating is better method than any others, however, there is still difference of temperature between internal part and surface part of semi-solid material. Worse yet, in case of high liquid fraction of semi-solid material, liquid of the billet will flow down though solid of the billet still remains, which is very difficult to handle. In the present study, induction heating of semi-solid material with compulsive surface cooling has been performed to obtain uniform distribution of temperature. Distribution of temperature of the billets was measured and compared with that of conventional distribution of temperature. By this new induction heating method, not only temperature over the whole billet become uniform, but also control of temperature is possible.

• Genomics & Informatics
• /
• 제1권2호
• /
• pp.94-100
• /
• 2003

Motivation: Many have observed a nonlinear relationship between the signal intensity and the transcript abundance in microarray data. The first step in analyzing the data is to normalize it properly, and this should include a correction for the nonlinearity. The commonly used linear normalization schemes do not address this problem. Results: Nonlinearity is present in both cDNA and oligonucleotide arrays, but we concentrate on the latter in this paper. Across a set of chips, we identify those genes whose within-chip ranks are relatively constant compared to other genes of similar intensity. For each gene, we compute the sum of the squares of the differences in its within-chip ranks between every pair of chips as our statistic and we select a small fraction of the genes with the minimal changes in ranks at each intensity level. These genes are most likely to be non-differentially expressed and are subsequently used in the normalization procedure. This method is a generalization of the rank-invariant normalization (Li and Wong, 2001), using all available chips rather than two at a time to gather more information, while using the chip that is least likely to be affected by nonlinear effects as the reference chip. The assumption in our method is that there are at least a small number of non­differentially expressed genes across the intensity range. The normalized expression values can be substantially different from the unnormalized values and may result in altered down-stream analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.465-468
• /
• 2000

The procedure of semi-solid forming is composed of heating a billet, forming, compression holding and ejecting step. There are several methods to heat a billet during semi-solid forming process such as electric heating and induction heating. Usually in semi-solid forming process, induction heating has been adopted to achieve more uniform temperature of semi-solid material. Although induction heating is better method than any others, however, there is still difference of temperature between internal part and surface part of semi-solid material. Worse yet, in case of high liquid fraction of semi-solid material, liquid of the billet will flow down though solid of the billet still remains, which is very difficult to handle. In the present study, induction heating of semi-solid material with compulsive surface cooling has been performed to obtain uniform distribution of temperature. Distribution of temperature of the billets was measured and compared with that of conventional distribution of temperature. By this new induction heating method, not only temperature over the whole billet become uniform, but also control of temperature is possible.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.157-157
• /
• 2011

Graphene has generated significant interest in the recent years as a functional material for electronics, sensing, and energy applications due to its unique electrical, optical, and mechanical properties. Much of the considerable interest in graphene stems from results obtained for samples mechanically exfoliated from graphite. Practical applications, however, require reliable and well-controlled methods for fabrication of large area graphene films. Recently high quality graphene layers were fabricated using chemical vapor deposition (CVD) on nickel and copper with methane as the source of the carbon atoms. Here, we report a simple and efficient method to synthesize graphene layers using solid carbon source. Few-layer graphene films are grown using filtered vacuum arc source (FVAS) technique by evaporation of carbon atom on Ni catalytic metal and subsequent annealing of the samples at 800$^{\circ}$C. In our system, carbon atoms diffuse into the Ni metal layer at elevated temperatures followed by their segregation as graphene on the free surface during the cooling down step as the solubility of carbon in the metal decrease. For a given annealing condition and cooling rate, the number of graphene layers is easily controlled by changing the thickness of the initially evaporated amorphous carbon film. Based on the Raman analysis, the quality of graphene is comparable to other synthesis methods found in the literature, such as CVD and chemical methods.

• 지질공학
• /
• 제19권1호
• /
• pp.71-79
• /
• 2009

다공질매질에 굴착된 2개의 관정과 단열암반층에 굴착된 2개의 관정으로 부터 단계양수시험이 실시되었다. Jacob(1947)이 제시한 P = 2.0 값은 단계양수시험의 수위강하를 해석하기 위하여 다공질매질과 단열암반층에 모두 적용되고 있다. 단계양수시험 해석에 대한 선형 모델(Jacob's graphic method)의 문제점들을 파악하기 위하여, 선형과 비선형 모델(Labadie and Helweg's least-sauares method)에서 산정된 우물상수(대수층손실상수(B), 우물손실상수(C) 및 우물손실지수(P))를 비교 분석하였다. 선형과 비선형 모델에서 산정된 C와 P값의 차이는 대수층의 투수성과 관정의 조건에 따라 다양하게 나타났다. 즉, 다공질매질에서 비선형 모델로 산정된 C값은 선형 모델로 산정된 C값에 비해 약 $10^0{\sim}10^{-2}$, 단열암반층에서는 약 $10^{-3}{\sim}10^{-6}$배 낮게 나타났다. 비선형 모델을 통해 산정된 다공질매질의 P값은 $2.124{\sim}2.775$, 단열암반층은 $3.459{\sim}5.635$의 범위로 산정되었으며, 이때 비선형 모델에서 우물손실은 P값에 따라 크게 좌우되었다. 선형과 비선형 모델을 통해 산정된 우물효율성의 차이는 다공질매질에서 $1.56{\sim}14.89%$, 단열암반층에서 $8.73{\sim}24.71%$를 보여 모델의 선택에 따라 상당한 오차를 가지는 것으로 나타났다. 또한 비선형의 최소제곱법을 적용한 회귀분석 방법이 모든 대수층의 단계양수시험 해석에 있어 매우 유용함을 확인하였다.

• 정보처리학회논문지D
• /
• 제16D권4호
• /
• pp.583-594
• /
• 2009

현재 기업이나 조직에서 적용할 수 있는 SOA(Service-Oriented Architecture, 이하 SOA)는 조직의 요구사항을 분석하여 비즈니스 모델을 설정하고 후보 서비스를 식별하여 필요한 서비스를 찾거나 개발하는 하향식 방법론(top-down methodology)이 대부분이다. 이 경우 기존의 시스템을 버리고 새로운 SOA를 도입하기에는 비용과 시간면에서 모험이 따를 수 있으므로 기존의 시스템을 최대한 이용하면서 점차적으로 SOA에 적합한 시스템으로 변환하기를 원한다. 본 논문에서는 기존의 레거시 시스템을 SOA에 적합한 웹서비스 형태로 만들기 위한 M-LSWS (A Method for Migration of Legacy System into Web Service)를 제안한다. M-LSWS는 레거시 시스템이 가지고 있는 디자인 명세 및 코드를 기반으로 비즈니스 프로세스를 분석하고 후보 서비스를 식별하여 재사용 가능한 웹서비스로 변환하는 절차를 정의하였으며 실제 SOA에 적합한 웹서비스 변환에 목적을 두고있다. 제안한 방법은 레거시 시스템 분석, 재사용 가능 서비스 도출 및 명세, 서비스 래핑, 서비스 등록의 네 단계로 이루어지며 단계별 프로세스와 가이드라인에 제시되고 도서관리 시스템에 적용함으로써 제안한 방법론의 타당성을 평가하여 본다.