• 대한전자공학회논문지
• /
• 제4권4호
• /
• pp.13-18
• /
• 1967

삼각함수형 선형 수동 RC분포회로의 전압전달함수의 모든 극점은 s-평면상에서 부의 실축상에 존재하므로 unit step input에 대한 과도응답은 단조한 특성을 갖는다. 이러한 특성은 집중정수회로에 적용하였던 Elmore의 상승시간 및 지연시간 계산방법을 RC분포회로에도 적용시킬 수 있는 충분한 조건이므로 본 논문에서는 삼각함수형 RC분포회로의 과도응답특성해석을 위의 방법으로 시도하였다. 그 결과 이 회로의 상승시간 및 지연시간은 시정수 및 거리각 θ의 증가와 더불어 이들 시간도 증가함을 확인하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.416-423
• /
• 2004

This paper presents the thermal characteristic analysis of a high-speed horizontal machining center with spindle speed of 50,000rpm and feedrate of 120m/fin. The spindle system is designed based on the built-in motor, angular contact ceramic ball bearings, oil-air lubrication and oil-jacket cooling method. The X-axis and Y-axis feeding systems are composed of the linear motors and linear motion guides, and the Z-axis feeding system is composed of the servo-motor, ball screw and linear motion guides. The thermal characteristics such as the temperature distribution, temperature rise, thermal deformation and step response, are estimated based on the finite element model of machining center and the heat generation rates of heat sources related to the machine operation conditions. Especially, the thermal time constant assessed from the step response function is introduced as an index of thermal response characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2051-2053
• /
• 1998

In spite of nonlinear or step-changing load and line disturbances, the inverter for the UPS must provide the pure sinusoidal output voltage with low THD(Total Harmonics Distortion). This paper proposes an inverter controller for the UPS which has a good dynamic response characteristic and robustness for applying industrial world directly. The inverter output voltage is controlled instantaneously with a double regulation loop by a TMS320C31 Digital Signal Processor so that it has very good dynamic response for nonlinear or step-changing load and line disturbances. To improve the voltage utilization and response characteristics, the Space Vector Modulation(SVM) technique is adapted for the switching method of this system. The characteristics of the proposed control system were verified by simulations and experiments.

• Smart Structures and Systems
• /
• 제12권6호
• /
• pp.595-617
• /
• 2013

Semi-active control equipments are used to effectually enhance the seismic behavior of structures. Magneto-rheological (MR) dampers are semi-active devices that can be utilized to control the response of structures during seismic loads and have received voracious attention for response suppression. They supply the adaptability of active devices and stability and reliability of passive devices. This paper presents an optimal fuzzy logic control scheme for vibration mitigation of buildings using magneto-rheological dampers subjected to near-fault ground motions. Near-fault features including a directivity pulse in the fault-normal direction and a fling step in the fault-parallel direction are considered in the requisite ground motion records. The membership functions and fuzzy rules of fuzzy controller were optimized by genetic algorithm (GA). Numerical study is performed to analyze the influences of near-fault ground motions on a building that is equipped with MR dampers. Considering the uncontrolled system response as the base line, the proposed method is scrutinized by analogy with that of a conventional maximum dissipation energy (MED) controller to accentuate the effectiveness of the fuzzy logic algorithm. Results reveal that the fuzzy logic controllers can efficiently improve the structural responses and MR dampers are quite promising for reducing seismic responses during near-fault earthquakes.

• 한국컴퓨터정보학회논문지
• /
• 제9권2호
• /
• pp.33-40
• /
• 2004

컴퓨터 성능과 정보통신 기술의 발달로 클라이언트/서버 환경이 보편화됨에 따라 서버는 제한된 대역폭의 절감과 빠른 응답시간, 그리고 확장성을 위해 클라이언트는 지역 캐쉬를 이용한다. 이때 서버와 클라이언트간에는 캐쉬된 데이타의 일관성 유지가 필요하며 이에 따라 많은 기법이 제안되고 있다. 이 논문은 기존의 갱신 빈도 캐쉬 일관성 기법을 개선한 것이다. 기존의 일관성 기법은 선언을 동기적으로 하여 응답시간이 늦거나 정확성 검사를 지연시켜 철회 단계가 증가하는 단점이 있다. 본 논문에서 제안된 기법은 이러한 문제점을 해결하기 위해 페이지 요청 또는 완료 시 갱신 연산이 일어난 객체에 대해 갱신 시간을 참조하여 수행하도록 하였다. 따라서, 갱신 연산이 이루어지는 경우 비동기적으로 선택 모드에 따라 갱신의도 선언 또는 갱신을 선택적으로 수행할 수 있어 응답이 빠르고 철회 단계가 감소하며 더 명확한 선택이 가능하다는 장점을 갖는다.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.422-429
• /
• 1990

The experimental study investigates two aspects of counterflow sensible heat regenerator operation. First, it examines the regenerator performance in periodic steady state operation with spatially nonuniform inlet temperature in one of the fluid stream. Second, the study examines the transient response of a regenerator to a step change in the inlet temperature of one of the fluid streams. The effect of transient inlet temperatures is analyzed in terms of the response of the outlet fluid temperatures to a step change in temperature of one of the inlet fluid streams. The effect of temperature nonuniformities is analyzed in terms of the change of temperature nonuniformities is analyzed in terms of the change in steady state effectiveness due to a circumferential temperature distribution in one of the inlet fluid streams. an experimental analysis has been conducted using a counterflow, parallel passage, and rotary regenerator made from polyethylene film. Efficiencies follow similar trends with increasing matrix to fluid capacity rate ratio for the balanced and symmetric regenerator with nonuniform inlet temperature.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.30-37
• /
• 2004

This paper presents the thermal characteristic analysis of a high-speed horizontal machining center with spindle speed of 50,000rpm and feedrate of 120m／min. The spindle system is designed based on the built-in motor, angular contact ceramic ball bearings, oil-air lubrication and oil-jacket cooling method. The X-axis and Y-axis feeding systems are composed of the linear motors and linear motion guides, and the Z-axis feeding system is composed of the servo-motor, ball screw and linear motion guides. The thermal characteristics such as the temperature distribution, temperature rise, thermal deformation and step response, are estimated based on the finite element model of machining center and the heat generation rates of heat sources related to the machine operation conditions. Especially, the thermal time constant assessed from the step response function is introduced as an index of thermal response characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.643-648
• /
• 2003

The problem considered in this paper is that the tip position of a flexible cantilever beam is controlled to follow a command signal, using a pair of piezoelectric actuators at the clamped end. The beam is lightly damped and so the natural transient response is rather long, and also since the sensor and actuator are not collocated, the plant response is non-minimum phase. Two control strategies were investigated. The first involved conventional PID control in which the feedback gains were adjusted to give the fastest closed-loop response to a step input. The second control strategy was based on an internal model control (IMC) architecture. The control filter in the IMC controller was a digital FIR device designed to minimize the expectation of the mean square tracking error. The IMC controller designed fur the beam was found to have very much reduced settling times to a step input compared with those of the PID controller.

• 한국식생활문화학회지
• /
• 제26권2호
• /
• pp.170-177
• /
• 2011

We examined household's food expenditures in this study. The empirical work outlined here used quarterly data from 2003 Q1 to 2010 Q3. All variables are in log form and were obtained from the Korea National Statistical Office. The food items included cereals, dairy products, fruits, meat, vegetables, and alcoholic beverages. We applied the ordinary least squares method to a model consisting of household income and seasonal dummies. This is because household expenditures are ordinarily a function of income and have seasonal characteristics. The household's food consumption patterns also reflect the prevailing social and environmental circumstances. This study showed that the income coefficients of cereals, meat, dairy products, and alcoholic beverages tend to increase in the long-run, whereas those of vegetables and fruits decreased. The results also revealed that consumption of alcoholic beverages and meat was greatly affected by household income fluctuations, whereas those of vegetables and dairy products were not sensitive to income. The impulse response functions indicated that expenditures not only increased slowly before peaking one to eight quarters after the income shock but declined very slowly to pre-shock levels. The response of dairy products at the twelfth step was three times as large as that of the first step.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1481-1497
• /
• 2015

Vertical earthquake ground motion may magnify vertical dynamic responses of structures, and thus cause serious damage to bridges. As main support structures, piers and bearings play an important role in vertical seismic response analysis of girder bridges. In this study, the pier and bearing are simplified as a vertical series spring system without mass. Then, based on the assumption of small displacement, the equation of motion governing the simply-supported straight girder bridge under vertical ground motion is established including effects of vertical deformation of support structures. Considering boundary conditions, the differential quadrature method (DQM) is applied to discretize the above equation of motion into a MDOF (multi-degree-of-freedom) system. Then seismic responses of this MDOF system are calculated by a step-by-step integration method. Effects of support structures on vertical dynamic responses of girder bridges are studied under different vertical strong earthquake motions. Results indicate that support structures may remarkably increase or decrease vertical seismic responses of girder bridges. So it is of great importance to consider effects of support structures in structural seismic design of girder bridges in near-fault region. Finally, optimization of support structures to resist vertical strong earthquake motions is discussed.