• Structural Engineering and Mechanics
• /
• v.85 no.1
• /
• pp.119-133
• /
• 2023

Impact event is the key factor influencing the operational state of the mechanical equipment. Additionally, nonlinear factors existing in the complex mechanical equipment which are currently attracting more and more attention. Therefore, this paper proposes a novel hybrid-separate identification strategy to solve the force identification problem of the nonlinear structure under impact excitation. The 'hybrid' means that the identification strategy contains both l1-norm (sparse) and l2-norm regularization methods. The 'separate' means that the nonlinear response part only generated by nonlinear force needs to be separated from measured response. First, the state-of-the-art two-step iterative shrinkage/thresholding (TwIST) algorithm and sparse representation with the cubic B-spline function are developed to solve established normalized sparse regularization model to identify the accurate impact force and accurate peak value of the nonlinear force. Then, the identified impact force is substituted into the nonlinear response separation equation to obtain the nonlinear response part. Finally, a reduced transfer equation is established and solved by the classical Tikhonove regularization method to obtain the wave profile (variation trend) of the nonlinear force. Numerical and experimental identification results demonstrate that the novel hybrid-separate strategy can accurately and efficiently obtain the nonlinear force and impact force for the nonlinear structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1732-1735
• /
• 2003

In this paper, a DSP-based test apparatus for Control Rod Drive Mechanism (CRDM) that is used in nuclear power plants is described. Using this apparatus, we can test the mechanical and electrical characteristics of CRDM and obtain some information about how to improve the CRDM further and how to design a power controller to actuate the CRDM. Since firing angles can be directly applied to the gate-drive circuits of thyristors in the power controller by using this apparatus, the maximum and minimum values of firing angles within available limits are easily measured. Also step-current inputs help us investigate each coil's response characteristics. Therefore, we can easily find the range of control gains which enables a stable CRDM operation in insertion and withdrawal actions at high speed, mid speed, and low speed. Since this apparatus has a test mode in which an insertion or withdrawal action is divided into several phases so that the current command for each phase is given step by step, we may judge whether the CRDM works as expected or not. We also describe a fault detection capability of the test apparatus for the power controller by using discrete Fourier transform.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.748-756
• /
• 2007

In SIR filter, fringing capacitances and discontinuities yield a distorted frequency response from those expected by design formulas, especially in higher frequencies. In this paper, a procedure is presented in order to compensate for fringing capacitances and step impedance discontinuities by EM simulation for a 5th order SIR filter. This method propose the procedure of tuning the coupling and the length of individual resonator by EM simulation. For the filter composed by the tuned resonators, no further tuning is required. The procedure is experimentally justified by comparing the measured data of the fabricated filter with the simulation results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.14-22
• /
• 2010

In this study, a large bus is tested for measuring the steering response based on the slarom test and step steer test. A full car model by using ADAMS/Car is established for computer simulation. For bus modeling, user defined templates are made and used in the simulation. Simulation results according to the slarom and step steer test are compared to the physical experiments, in which several sensors are installed to measure vehicle responses. The results obtained from the comparison show a good agreement with regard to the vehicle velocity and steering angle.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1340-1342
• /
• 2001

ZnO thin films are Prepared on Si(111) substrate by RF magnetron sputtering. Two-step deposition method is proposed to obtain ZnO thin films with high c-axis (002) TC value and electrical resistivity. This method consists of the following two-step deposition procedures: 1st-deposition for 10$\sim$30 min without oxygen at 100W and 2nd-deposition with oxygen added in the range of $O_2/(Ar+O_2)$ = 10 $\sim$ 50%. SAW filters with IDT/ZnO/Si(111) configuration are also fabricated. From the frequency response characteristics, the insertion loss and the side-lobe rejection are estimated.

• ETRI Journal
• /
• v.20 no.2
• /
• pp.115-132
• /
• 1998

This paper proposes an extended service filtering technique to prevent overload in service control point (SCP) due to televoting (VOT) or mass calling (MAS) services with the heavy traffic characteristics. Also, this paper compares this extended technique with the existing overload control techniques, and calculates steady state call blocking probabilities in intelligent network (IN) under overload conditions. The proposed technique considers SCP overload and IN Capability Set (CS)-1 services (such as VOT or MAS service) that have to use the specialized resources of intelligent peripheral (IP). This technique uses first an activating step in which SCP requests service filtering to service switching point (SSP). Then, in the filtering step, SSP sends filtering results to SCP periodically or each N-calls. Also, when filtering time-out expires, SSP stops service filtering, and sends service filtering response to SCP in the deactivating step. This paper applies this technique to VOT/MAS service, and calculates SCP and SSP-IP (circuit) call blocking probabilities by using an analytical VOT/MAS service model. With the modeling and analyzing of this new technique, it shows that this technique reduces the traffic flow into SCP from SSP and IP prominently.

• YAKHAK HOEJI
• /
• v.36 no.1
• /
• pp.56-65
• /
• 1992

The present study examined the effects of carbon monoxide (CO) intoxication and aging on learning and memory deficit in young($5{\sim}8$ weeks) and aged($52{\sim}66$ weeks) mice, using the step down and step through passive avoidance failure techniques. We also investigated the effects of ginseng saponins on memory deficit. Significant decrease in memory registration, retention and retrieval function in young mice and decrease in memory registration and retention function in aged mice were observed. Normal young mice were apt to perform to a great degree of passive avoidance response than normal aged mice, but there was no difference between both groups by CO exposure. Administration of ginseng saponins showed an improvement on passive avoidance failure induced by CO exposure.

• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.15-23
• /
• 2016

The direct-drive servo valve(DDV) is a kind of one-stage valve because the main spool valve is directly driven by the dc motor. Since the DDV structure is simple, it is less expensive, more reliable, and offers a reduced internal leakage and a reduced sensitivity to fluid contamination. The control system of the DDV is highly nonlinear due to a current limiter, a voltage limiter, and the flow-force effect on the spool motion. The shape of the step response of the DDV-control system varies considerably according to the magnitudes of the step input and the load pressure. The system-design requirements mean that the overshoots should be less than 20%, and the errors at 0.02s should be less than 2%, regardless of the reference-step input sizes of 1V and 5V and the load-pressure magnitudes of 0MPa and 20.7MPa. To satisfy the system-design requirements, the PID-controller parameters of $K_c$, $T_i$ and $T_d$, and the derivative-feedback gain of $K_{der}$ are designed using the root locus and manual tuning.

• Journal of Korea Water Resources Association
• /
• v.40 no.12
• /
• pp.969-983
• /
• 2007

This study developed a ten-step procedure of integrated watershed management (IWM) for sustainability to rehabilitate the distorted hydrologic cycle and identified spatial hazard ranking(step 2). Spatial hazard indices, Potential flood damage (PFD), potential streamflow depletion (PSD), potential water quality deterioration (PWQD), and watershed evaluation index (WEI) were developed using multi-criteria decision making (MCDM) techniques and sustainability evaluation concept(pressure-state-response model). The used MCDM techniques are composite programming, compromise programing, Regime method, and EVAMIX approach which are classified by data availability and objectives (prefeasibility and feasibility).

• KIEAE Journal
• /
• v.11 no.6
• /
• pp.29-35
• /
• 2011

This study aims to suggest improvement plans and explain about the current situation for facilitating Long-life housing, based on the results on flexibility items among 27 items consisting the "Housing Performance Grading System". From the 9th of January, 2006 to the month of July in 2011, study has analyzed evaluation results on 216 different types for each grade and reviewed evaluation criteria and methods. Current evaluation criteria applies quantitative analysis, by calculating in percentage how much bearing walls and columns, which hinder flexibility, take up space in the household. The evaluation rate for each household was assessed in relation to its structural system, and a higher grade was given to column-typed structures. In addition, to facilitate long-life housing, this study extracted harmful factors, expanding the range of evaluation. The first step was to evaluate structure, which is the basic element. The second step can to evaluate the probability of applying resources in response to the changes of structural systems. As The third step, Flexibility item will evaluate the probability of moving the water-using area, suggesting gradual approach. Thus, through evaluations of flexibility items, the study aims to improve the quality of life in household, by avoiding uniform structures and acquiring more freedom for space designs.