• 대한의생명과학회지
• /
• 제15권4호
• /
• pp.265-272
• /
• 2009

Recently, mesenchymal stem cells (MSCs) began to be utilized as a vehicle for ex vivo gene therapy based on their plasticity. Effective and safe transfection of therapeutic genes is a critical step for genetic modification of MSCs. Therefore, optimization of in vitro gene delivery into MSCs is essential to provide genetically modified stem cells. In this study, various cationic liposomes, O,O'-dimyristyl-N-lysyl aspartate (DMKD), DMKD/cholesterol, O,O'-dimyristyl-N-lysyl glutamate (DMKE), DMKE/cholesterol, and N-[1-(2,3-dioleoyloxy)]-N,N,N-trimethylammonium propane methyl sulfate (DOTAP)/cholesterol, were mixed with plasmid DNA encoding luciferase (pAAV-CMV-Luc) at varied ratios, and then used for transfection to MSCs under varied conditions. The MSCs were also transfected by electroporation under varied conditions, such as voltage, pulse length, and pulse interval. According to the experimental results, electroporation-mediated transfection was more efficient than cationic liposome-mediated transfection. The best MSC transfection was induced by electroporation 3 times pulses for 2 ms at 200 V with 10 seconds of a pulse interval.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.488-488
• /
• 2013

일반적으로 sputtering 방식을 이용한 박막 증착 방법은 장치가 간단하고 고품질의 박막이나 균일한 박막을 만들 수 있는 장점이 있어 널리 사용된다. 본 연구에서는 기존의 sputtering 방식에 Modulation technology를 적용하고자 한다. Modulation technology를 이용하여 전원의 pulse on 시에는 일반적인 sputter 방식으로 기판에 박막을 증착하고 pulse off 시에는 양의 전압을 인가하여 이온빔을 발생시킨 후 기판에 입사시키는 방식을 적용하여 박막 형성의 특성을 향상시키고자한다. 이는 고온의 heater 및 이온빔이나 레이저, 플라즈마 소스 등의 추가적인 에너지원의 장치가 필요 없이 고품질의 박막의 특성을 향상시키는 기대 효과가 있다. Modulated Sputtering System (MSS)에 인가되는 전압과 전류의 특성을 관찰하였으며 MSS에 인가하는 전압과 frequency, 그리고 duty cycle 변화에 따른 이온 에너지 분포를 에너지 분석기를 통해 측정하였다. 또한 Langmuir probe를 이용한 afterglow plasma 상태에서의 이온전류를 측정하였다. 그리고, MSS 이용하여 Ti 박막을 증착하였으며 박막의 특성을 분석하기 위하여 a-step, SEM, XRD, AFM을 이용하여 두께, 결정성장면, 표면 거칠기를 측정하였다. 측정 결과 기판에 입사되는 양이온의 에너지가 증가함에 따라 (002) 결정면 방향에서 (100) 결정면 방향으로 증착되고 표면 거칠기가 낮아짐을 측정하였다. 또한 Graphite 타겟을 이용한 carbon 박막을 증착하였으며 박막의 특성을 분석하기 위하여 Raman을 이용한 분석 결과 양이온의 에너지가 증가함에 따라 박막내의 sp3 함유량이 변화함을 측정하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1997년도 제8회 학술강연회논문집
• /
• pp.259-265
• /
• 1997

An analytical study has been peformed to investigate the unsteady ignition characteristics of pulse combustion. In many combustion applications, strain rate of the flow can significantly affect the combustion features; ignition, extinction, and reignition. In the pulse combustion, two jets (hot combustion gases and fresh mixtures) coming from the opposite side of the combustor will collide in the combustor forming a stagnation region where the chemical reaction is suppressed by the strain rate until this becomes below the critical value. In this research, the method of large activation energy asymptotic is adopted with one step irreversible kinetics to examine the ignition response to the periodic variation of the strain rate of flow. The results show the variation of the maximum value of strain rate can determine whether the ignition or extinction occur.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.38-42
• /
• 2008

The voltammetic behavior of Vitamin B6 (VB6) was studied at a glassy carbon electrode in phosphate buffers using cyclic, linear sweep and differential pulse voltammetry. The oxidation process was shown to be irreversible over the entire pH range studied (4.0-10.0) and was adsorption controlled. The adsorption amount of VB6 on the glassy carbon electrode was examined by chronocoulometry and the value of n, product of transfer coefficient and number of electrons transferred in the rate determining step, was determined from Tafel plot. VB6 was determined by differential pulse voltammetry and the peak current was found linearly with its concentration in the range of 3 10-7-2 10-4 mol L-1. The detection limit was 1 10-7 mol L-1. The procedure was successfully applied for the assay of VB6 in tablets.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.249-250
• /
• 2006

In this paper, hardware design and implementation of digital controller for the High Precision Digital Power Supply (HPDPS) based on Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA) is presented. Developed digital controller is composed of high resolution Digital Pulse Width Modulation (DPWM) and high resolution analog to digital converter circuit with anti-aliasing filter. And Digital Signal Processor (DSP) has the capability of a few micro-second calculation time for one feedback loop. 32-bit DSP and DPWM with 150[ps] step resolution is used to implement the HPDPS. Also 18-bit 2 mega sample per second ADC board is adopted for the developed digital controller. Also, hardware structure of the developed digital controller and experimental results of the first prototype board for HPDPS is described.

• 한국레이저가공학회지
• /
• 제3권2호
• /
• pp.25-33
• /
• 2000

One of perspective direction of microfabrication is direct laser writing technology that allows to create metal, semiconductive and dielectric micropatterns on substrate surface. In this work, a two step method, the combination of seed forming process, in which metallic Al seed was selectively generated on AlN ceramic substrate by direct writing technique using a pulsed Nd : YAG laser and subsequent electroless Ni plating on the activated Al seed, was presented. The effects of laser parameters such as pulse energy, scanning speed and pulse frequency on shape of Alseed and conductor line after electroless Ni plating were investigated. The nature of the laser activated surface is analyzed from XPS data. The line width of this metallic Al and Ni is analyzed using SEM. As a results, Al seed line with 24㎛ width and 100㎛ isolated line space is obtained. Finally, laser direct writing can be applied in the field between thin and thick film technique in electronic industry.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.130-138
• /
• 2002

This paper presents the modeling and analysis of dynamic characteristics of hydraulic snubber in electric power plant. The nonlinear state-space model of 14th order to describe the dynamics of the snubber was established by Simulink. The simulation results show that the hydraulic snubber reacts as like the conventional shock absorbers against the high pulse shock load. The snubber also shows the peculiar characteristics to the small step load, which temporarily lock the control valves up, however maintain same steady-state pressures of all internal chambers in the long run. Two case studies for the analysis of the snubber were addressed. Practical pulse testing method was also proposed to identify the frequency response characteristics of the snubber.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1594-1596
• /
• 1996

The NDT(nondestructive test) using pulse echo method with piezoelectric transducers and the system for NDT including image processing were studoed. The system consisted of pulse generator and receiver, two step motors for X-Y scanner, PC-Scope for data aquisition and PC-Lab for trigger and motor driving. We tested and estimated at one point under the following conditions : 1) just water, 2) Aluminum without any crack and 3) Aluminum with hole. The estimated NDT result of whole area (point : $35{\times}20$) is compared with real samples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.70-72
• /
• 2002

LPM that is used for head driver is problem of miniaturization of construction and cost. This can be achieved by most suitable shape decision. and suitable selection of control system. Specially, in LPM that Full step is mm$\sim$um unit. the large change of thrust receives much effect by tooth number per pole. tooth width and slot width about change of the air gap length. Therefore, this paper presents LPM that use for suitable head driver to reduce of the structure and the cost. to generate maximum thrust of LPM, and finds the proportion of the tooth pitch to tooth width and the slot width about change of the air gap length through FEM analysis. Also, applying different tooth width and slot width that is given as analysis result. this paper presented model that thrust is improved.

• 분석과학
• /
• 제8권4호
• /
• pp.655-661
• /
• 1995

The electrochemical reduction of coumarin derivatives in 0.1M TEAP acetonitrile solution was investigated by the direct current, differential pulse polarography, cyclic voltammetry and controlled potential coulometry. The electrochemical reduction of 7-acetoxy-4-bromomethyl-coumarin(ABMC) was proceeded as an irreversible three steps(-0.58, -1.63 and -2.25 volts) of electrochemical transfer before chemical reaction. The solution color turned to yellow after the carboxyl group was reduced at 2nd step(-1.63 volts vs. Ag-AgCl) and the change in color was independant to the bromo group. Upon the basis of the results on the products analysis and the interpretaton of polarograms, a possible electrochemical reaction mechanism was suggested.