• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.243-250
• /
• 2009

Pravastatin sodium, competitive inhibitors of HMG-CoA(3-hydroxy-3-methylglutaryl coenzyme A) reductase, is produced from the culture broth of Streptomyces carbophilus KCCM 10370, The production of Pravastatin sodium was increased about 45 fold compared to wild type by UV mutation. Production of Pravastatin was also improved by continuous feeding of Compactin sodium to 24% and bioconversion ratio was also increased to 4.3% by intermittent addition. In main culture, concentration of Compactin sodium was kept less than 0.1%(w/v) under continuous feeding of Compactin sodium then product was 0.49% and bioconversion was 70%. After finishing the fermentation, Pravastatin was purified by various chromatographies such as Diaion HP20 resin column, Partition, and ODS(Octa-Decylsilyl Silicagel) resin column with a final yield of 70~72% and over 99.7% purity. The IR, UV, and NMR study of the purified Pravastatin sodium showed the same pattern as that of EP(European Pharmacopoeia).

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.7-14
• /
• 2006

In this study, nitrogen removal characteristics of SBR3 process, which is two-sludge system of sequencing batch reactor(SBR) type, were investigated, with comparison of those of SBR1 process, which is conventional SBR process, and SBR2 process, which was designed to enhance denitrification efficiency through step-feeding of wastewater, using domestic wastewater. SBR3 process of two-sludge type can perform external nitrification, on which nitrification occurs in separated reactor, and enhanced denitrification using biosorbed organics. In the results with domestic wastewater, T-N removal efficiency of SBR3 process was better than those of SBR1 and SBR2 processes. It was observed that bigger difference of T-N removal efficiency between SBR3 process and SBR1 & SBR2 processes was showed at low C/N ratio than that at high C/N ratio resulting from more efficient use of organics by biosorption mechanism in denitrification of SBR3 process than those of SBR1 and SBR2 processes. In addition, T-N removal efficiency of SBR3 process according to influent T-N loading rate was better than those of SBR1 and SBR2, even though influent T-N loading rate of SBR3 process was higher than that of SBR1 and SBR2 process resulting from operation of SBR3 process in short hydraulic retention time(HRT) by external nitrification.

• Journal of Nutrition and Health
• /
• v.33 no.7
• /
• pp.697-702
• /
• 2000

The objective of this study was to determine the extent to which the compensatory nutrition regimen modulates lactation performance and milk protein gene expression in the first and second lactation cycles. Female rats(28 days of age) were assigned to 1)control ad libitum ; 2) stari-step compensatory nutrition(SSCN) regimen an alternating 3-2-3-4-week schedule beginning with an energy restriction diet(40% restriction) for 3 weeks followed by the control diet(ad libitum) for 2 weeks and then alternating another 3-4 week feeding regimen. The SSCN rats were received an overall 20% energy restriction(average from all stair-step periods) compared with the conventionally fed control group. Rats were bred during the first week of the second realimentation. All pups were weaned on day 21 of lactation. About 1 week after weaning all dams were mated for the second pregnancy. Mammary tissues were obtained from pregnant and lactating rats during the first and second lactation cycles. During these lactation cycles the SSCN group had a 11% increase in average lactation performance over that of control. The SSCN group had significantly increased levels of milk protein gene($\alpha$- and $\beta$-casein) expression in mammary tissues during the first lactation cycle compared with those of the control group. During the second lactation period the levels of milk protein gene expression in lactating mammary tissues of the SSCN group were also higher than those of the control group. These results suggest that the effects of compensatory growth imposed at an early age extend to the second lactation cycle with regard to increased lactation performance and milk protein gene expression.

• Journal of the Korean Home Economics Association
• /
• v.44 no.12
• /
• pp.9-18
• /
• 2006

A case study was conducted on the development of patient clothes designs at the Korea University Medical Center, in order to provide an example of patient clothes designs which meet the hospital identity and the demands of patients and nurses. In this study, we focused on general patient pajamas and one-piece gowns worn in the obstetrics and gynecology department. A scientific and systematic design approach consisting of the following four steps was conducted in the designing process: needs assessment, design direction establishment, design presentation, and final decision. For the first step, focused group interviews and a survey were conducted to identify the needs of the patients and nurses. According to the results of the first step, 3 fabric patterns with light, modern, rhythmic, modest and ordinary images were designed utilizing the university and hospital symbols and logotypes. Fixed forms with realistic and geometric characteristics and colors, including white, yellow, blue, grey, and pink were selected to deliver the preferred image. Each fabric pattern was made in male and female versions of the color sets. The following styles of patient clothes were made with the 3 fabric samples: general patient pajamas with a U-neckline, 9/10-length sleeves and ankle-length pants, a full-length sleeved gown with openings for breast-feeding, and a gown with a deep back-neckline and button fastening. Different sizing systems for males and females were recommended for the production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.12
• /
• pp.1849-1857
• /
• 2007

The experiment was carried out using fistulated multiparous Holstein Friesian crossbred (75% Holstein Friesian and 25% Red Sindhi) dairy cows in their dry period fed on untreated rice straw to evaluate the nutritive value of local protein feed resources using the in sacco method and in vitro pepsin-pancreatin digestion. Experimental feeds were cottonseed meal (CSM); soybean meal (SBM); dried brewery's grains (DBG); palm kernel meal (PSM); cassava hay (CH); leucaena leaf meal (LLM). Each feedstuff was weighed into duplicate nylon bags and incubated in each of the two rumen fistulated cows for 0, 2, 4, 8, 16, 24, and 48 h. Rumen feed residues from bags of 16 h incubation were used for estimation of lower gut digestibility by the technique of in vitro pepsin-pancreatin digestion. Ruminal ammonia-nitrogen ($NH_3-N$) concentrations did not differ between treatments or time with a mean of 5.5 mg%. Effective degradability of DM of CSM, SBM, DBG, PSM, CH and LLM were 41.9, 56.1, 30.8, 47.0, 41.1 and 47.5%, respectively. Effective degradabilities of the CP in feedstuffs were 49.6, 59.2, 40.9, 33.5, 47.3 and 65.0% for the respective feedstuffs. The CP in vitro pepsin-pancreatin digestibility as ranked from the highest to the lowest were SBM, CSM, LLM, CH, DBG, PSM, respectively. The intestinal and total tract digestion of feedstuffs in the current study were relatively lower than that obtained from previous literature. The results of this study indicate that SBM and LLM were highly degradable in the rumen, while CH, CSM and DBG were less degradable and, hence resulted in higher rumen undegradable protein. Soybean meal and LLM could be used to improve rumen ecology whilst CH, CSM and DBG could be used as rumen by-pass protein for ruminant feeding in the tropics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.178-178
• /
• 2010

With the scaling down of ULSI(Ultra Large Scale Integration) circuit of CMOS(Complementary Metal Oxide Semiconductor)based electronic devices, the electronic devices become more faster and smaller size that are promising field of semiconductor market. However, very narrow line width has some disadvantages. For example, because of narrow line width, deposition of conformal and thin barrier is difficult. Besides, proportion of barrier width is large, thus resistance is high. Conventional PVD(Physical Vapor Deposition) thin films are not able to gain a good quality and conformal layer. Hence, in order to get over these side effects, deposition of thin layer used of ALD(Atomic Layer Deposition) is important factor. Furthermore, it is essential that copper atomic diffusion into dielectric layer such as silicon oxide and hafnium oxide. If copper line is not surrounded by diffusion barrier, it cause the leakage current and devices degradation. There are some possible methods for improving the these secondary effects. In this study, TaNx, is used of Tertiarybutylimido tris (ethylamethlamino) tantalum (TBITEMAT), was deposited on the 24nm sized trench silicon oxide/silicon bi-layer substrate with good step coverage and high quality film using plasma enhanced atomic layer deposition (PEALD). And then copper was deposited on TaNx barrier using same deposition method. The thickness of TaNx was 4~5 nm. TaNx film was deposited the condition of under $300^{\circ}C$ and copper deposition temperature was under $120^{\circ}C$, and feeding time of TaNx and copper were 5 seconds and 5 seconds, relatively. Purge time of TaNx and copper films were 10 seconds and 6 seconds, relatively. XRD, TEM, AFM, I-V measurement(for testing leakage current and stability) were used to analyze this work. With this work, thin barrier layer(4~5nm) with deposited PEALD has good step coverage and good thermal stability. So the barrier properties of PEALD TaNx film are desirable for copper interconnection.

• Clean Technology
• /
• v.13 no.3
• /
• pp.208-214
• /
• 2007

Environmentally-friendly acrylic resin particles having the diameter between $0.1\;and\;1\;{\mu}m$ were prepared using non-aqueous dispersion (NAD) polymerization technique. The first step is to prepare the stabilizer and the next step is the NAD polymerization by dropping an acrylic monomer to stabilizer dispersed in organic media. To obtain a NAD resin with proper level of viscosity, it fumed out that stabilizers having sufficient viscosity such as 1000 cP need to be used, for which the stepwise feeding of monomer and initiator was necessary. It was necessary to put proper amount of stabilizer, but no more increase in viscosity was observed when more than that amount of stabilizer was added. Choice of proper monomers considering solubility parameter was essential to avoid the bimodal particle size distribution in the NAD resin product.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.3
• /
• pp.117-124
• /
• 2000

A systolic array is a parallel processing system which consists of processing elements of basic computation capabilities, connected with regular and local communication lines. It has been known that a systolic array is on of effective systems to solve complicated communication problems occurred between densely connected neurons on ANN(Artificial Neural Network). In this paper, a systolic array simulator for the back-propagation ANN, which automatically constructs the proper systolic array for a given number of neurons of the ANN, is designed and constructed. With animation techniques of the simulators, it is easy for users to be able to examine the execution of the back-propagation algorithm on the designed systolic array step by step. Moreover the simulator can perform forward and backward operations of the back-propagation algorithm either in sequence or in parallel on the designed systolic array. Parallel execution can be performed by feeding continuous input patterns and by executing bidirectional propagations on all of processing elements of a systolic array at the same time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.7
• /
• pp.962-970
• /
• 2012

This study aimed to investigate the effects of ruminal infusion of garlic oil (GO) on fermentation dynamics, fatty acid (FA) profile, and abundance of bacteria involved in biohydrogenation in the rumen. Six wethers fitted with ruminal fistula were assigned to two groups for cross-over design with a 14-d interval. Each 30-d experimental period consisted of a 27-d adaptation and a 3-d sample collection. Goats were fed a basal diet without (control) or with GO ruminal infusion (0.8 g/d). Ruminal contents collected before (0 h) and at 2, 4, 6, 8, and 10 h after morning feeding were used for fermentation analysis, and 0 h samples were further used for FA determination and DNA extraction. Garlic oil had no influence on dry matter intakes of concentrate and hay. During ruminal fermentation, GO had no effects on total VFA concentration and individual VFA molar proportions, whereas GO increased the concentrations of ammonia nitrogen and microbial crude protein (p<0.05). Compared with control, GO group took a longer time for total VFA concentration and propionate molar proportion to reach their respective maxima after morning feeding. The ratio of acetate to propionate in control reduced sharply after morning feeding, whereas it remained relatively stable in GO group. Fatty acid analysis showed that GO reduced saturated FA proportion (p<0.05), while increasing the proportions of C18, t11-18:1 (TVA), c9,t11-conjugated linoleic acid (c9,t11-CLA), t10,c12-CLA, and polyunsaturated FA (p<0.05). The values of TVA/(c9,t11-CLA+TVA) and C18:0/(TVA+C18:0) were reduced by GO (p<0.05). Real-time PCR showed that GO tended to reduce Butyrivibrio proteoclasticus abundance (p = 0.058), whereas GO had no effect on total abundance of the Butyrivibrio group bacteria. A low correlation was found between B. proteoclasticus abundance and C18:0/(TVA+C18:0) (p = 0.910). The changes of fermentation over time suggested a role of GO in delaying the fermentation process and maintaining a relatively modest change of ruminal environment. The inhibitory effects of GO on the final step of biohydrogenation may be related to its antibacterial activity against B. proteoclasticus and other unknown bacteria involved.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.605-610
• /
• 2001

We investigated the effects of salinity on an estuarine cladoceran, Diaphanosoma celebensis as a substitute live food organism of Artemia, which has been used for the next step of rotifer, in the course of seedling production of marine fishes, Culture density for growth, possibility of stable culture (RPGI: Relative Population Growth Index) and food feeding activity (RCN: Remaining Cell Numbers) of D. celebensis were investigated at intervals of 5 ppt under 10 steps of different saline conditions from 0 to 45 ppt. According to the results, the experimental group, which was regarded as the best condition of culture density for growth, stable culture possibility (RPGI) and good food feeding activity (RCN), was salinity culture condition of 20 put, and relative stable culture conditions were observed under saline concentrations $15\~35\;ppt$. Their functions under culture conditions of lower or higher salinities than 20 ppt appeared remarkably to be decreased, while all individuals were dead under the saline condition of 0 ppt after the beginning of the experiment. From these results of this study, it is assumed that estuarine cladoceran, D. celebensis can be cultured easily as a substitute live food organism of Artemia in the course of seedling production of marine fishes.