• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.151-163
• /
• 2008

A formulation of three-dimensional model of articulated train-b ridge dynamic interaction has been made for the Korean eXpress Train (KTX). Semi-periodic profiles of rail irregularities consisting of elevation, alignment, cross and gauge irregularities have also been proposed using FRA maximum tolerable rail deviations. The effects of rail joints and sleeper step were also included. The resulting system matrices of train and bridge are very spare, and thus, are stored in one-dimensional arrays, yielding a time-efficient solution. A numerical algorithm for computing bridge-train response including an iterative scheme is also formulated. A program simulating train-bridge interaction and solving this problem using the new algorithm is implemented as new modules for the f inite element analysis software named XFINAS. Computed results using the new program are then checked by that of the validated 2-D bridge-train interaction model. This new 3D analysis provides more detailed train responses such as swaying, bouncing, rolling, pitching and yawing accelerations, which are useful inevaluating passenger riding comfort. Train operation safety and derailment could also be directly investigated by relative wheel displacements computed from this program.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.29-43
• /
• 2019

The calibration of microscopic traffic simulation models has received much attention in the simulation field. Although no standard has been established for it, a genetic algorithm (GA) has been widely employed in recent literature because of its high efficiency to find solutions in such optimization problems. However, the performance still falls short in simulation analyses to support fast decision making. This paper proposes a new calibration procedure using a dual GA and central composite design (CCD) in order to improve the efficiency. The calibration exercise goes through three major sequential steps: (1) experimental design using CCD for a quadratic response surface model (RSM) estimation, (2) 1st GA procedure using the RSM with CCD to find a near-optimal initial population for a next step, and (3) 2nd GA procedure to find a final solution. The proposed method was applied in calibrating the Gipps car-following model with respect to maximizing the likelihood of a spacing distribution between a lead and following vehicle. In order to evaluate the performance of the proposed method, a conventional calibration approach using a single GA was compared under both simulated and real vehicle trajectory data. It was found that the proposed approach enhances the optimization speed by starting to search from an initial population that is closer to the optimum than that of the other approach. This result implies the proposed approach has benefits for a large-scale traffic network simulation analysis. This method can be extended to other optimization tasks using GA in transportation studies.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.439-445
• /
• 1998

The antimutagenic activity of the water extract of Rehmannia glutinosa Liboschitz (RG) on the mutagenicity induced by 4-nitroquinoline 1-oxide (4-NQO), N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), mitomycin C (MMC), $aflatoxin\;B_1\;(AFB_1)$ and benzo(a)pyrene [B(a)P] were studied using the SOS Chromotest with Escherichia coli PQ37. The water extract of RG was separated into methanol soluble and methanol insoluble parts. The methanol soluble part exhibited higher inhibition effects than the methanol insoluble part against the mutagenic activities of five mutagens. Step-wise fractionation of methanol soluble part was done using methanol, ethyl acetate and water. Among these fractions, water fraction had the strongest inhibitory effects against the mutagenenicity of five model mutagens, showing $4.5{\sim}29.5%$ inhibition, but the $AFB_1$ mutagenic potency was increased slightly by ethyl acetate fraction. The water fraction was further partitioned by sephadex LH-20 column chromtography, and 9 subfractions were obtained. The fraction III showed the strongest inhibitory effects with dose response against the mutagenic activities induced by all the tested chemical mutagens. The inhibition rates of fraction III at concentration of $400\;{\mu}g/assay$ were 29%, 35%, 38%, 25% and 24% against 4-NQO, MNNG, MMC, AFBl and B(a)P, respectively. The fraction III also exhibited a strong bio-an-timutagenicity against 4-NQO and $AFB_1$ by showing more than 40% inhibition.

• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.832-839
• /
• 2008

The stock that is the first step for preparation of soups and purees links to the taste of food. Many types of vegetable have been used in stocks, but this study focused on stocks prepared with sweet pumpkin. The stock preparation conditions including the weight of sweet pumpkin, the water volume, and the boiling time at $97^{\circ}C$ were optimized by response surface methodology. The quality characteristics of the resulting stock were investigated. The color, flavor, taste and overall acceptability were dependent parameters. A model equation was proposed with regard to the sweet pumpkin weight, water volume, and boiling time at $97^{\circ}C$. A sweet pumpkin weight of 357.9 to 403.0 g, a water volume of 689.8 to 768.5 mL, and a boiling time of 9.9 to 10.3 min at $97^{\circ}C$ were found to be the optimal stock preparation conditions. The quality characteristics of the sweet pumpkin stock prepared under the optimized conditions were pH 6.64, total acidity 0.18%, soluble solids $2.39\;^{\circ}Brix$, color value (L, 99.07 a, -2.43 b, 11.82), total polyphenol 280.75 mg/L, and electron donating ability 21.32%.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.5
• /
• pp.91-99
• /
• 1998

The widespread use of thin shell structures has created a need for a systematic method of analysis which can adequately account for arbitrary geometric form and boundary conditions as well as arbitrary general type of loading. Therefore, the stress and analysis of thin shell has been one of the more challenging areas of structural mechanics. A wide variety of numerical methods have been applied to the governing differential equations for spherical and cylindrical structures with a few results applicable to practice. The analysis of axisymmetric spherical shell is almost an every day occurrence in many industrial applications. A reliable and accurate finite element analysis procedure for such structures was needed. Dynamic loading of structures often causes excursions of stresses well into the inelastic range and the influence of geometry changes on the response is also significant in many cases. Therefore both material and geometric nonlinear effects should be considered. In general, the shell structures designed according to quasi-static analysis may fail under conditions of dynamic loading. For a more realistic prediction on the load carrying capacity of these shell, in addition to the dynamic effect, consideration should also include other factors such as nonlinearities in both material and geometry since these factors, in different manner, may also affect the magnitude of this capacity. The objective of this paper is to demonstrate the dynamic characteristics of spherical shell. For these purposes, the spherical shell subjected to uniformly distributed step load was analyzed for its large displacements elasto-viscoplastic static and dynamic response. Geometrically nonlinear behaviour is taken into account using a Total Lagrangian formulation and the material behaviour is assumed to elasto-viscoplastic model highly corresponding to the real behaviour of the material. The results for the dynamic characteristics of spherical shell in the cases under various conditions of base-radius/central height(a/H) and thickness/shell radius(t/R) were summarized as follows : The dynamic characteristics with a/H. 1) AS the a/H increases, the amplitude of displacement in creased. 2) The values of displacement dynamic magnification factor (DMF) were ranges from 2.9 to 6.3 in the crown of shell and the values of factor in the mid-point of shell were ranged from 1.8 to 2.6. 3) As the a/H increases, the values of DMF in the crown of shell is decreased rapidly but the values of DMF in mid-point shell is increased gradually. 4) The values of DMF of hoop-stresses were range from 3.6 to 6.8 in the crown of shell and the values of factor in the mid-point of shell were ranged from 2.3 to 2.6, and the values of DMF of stress were larger than that of displacement. The dynamic characteristics with t/R. 5) With the thickness of shell decreases, the amplitude of the displacement and the period increased. 6) The values of DMF of the displacement were ranged from 2.8 to 3.6 in the crown of shell and the values of factor in the mid-point of shell were ranged from 2.1 to 2.2.

• Nutrition Research and Practice
• /
• v.12 no.3
• /
• pp.199-207
• /
• 2018

BACKGROUND/OBJECTIVES: Fermented Laminaria japonica (FL), a type sea tangle used as a functional food ingredient, has been reported to possess cognitive improving properties that may aid in the treatment of common neurodegenerative disorders, such as dementia. MATERIALS/METHODS: We examined the effects of FL on scopolamine (Sco)- and ethanol (EtOH)-induced hippocampus-dependent memory impairment, using the Passive avoidance (PA) and Morris water maze (MWM) tests. To examine the underlying mechanisms associated with neuroprotective effects, we analyzed acetylcholine (ACh) and acetylcholinesterase (AChE) activity, brain tissue expression of muscarinic acetylcholine receptor (mAChR), cAMP response element binding protein (CREB) and extracellular signal-regulated kinases 1/2 (ERK1/2), and immunohistochemical analysis, in the hippocampus of mice, compared to current drug therapy intervention. Biochemical blood analysis was carried out to determine the effects of FL on alanine transaminase (ALT), aspartate transaminase (AST), and triglyceride (TG) and total cholesterol (TC) levels. 7 groups (n = 10) consisted of a control (CON), 3 Sco-induced dementia and 3 EtOH-induced dementia groups, with both dementia group types containing an untreated group (Sco and EtOH); a positive control, orally administered donepezil (Dpz) (4mg/kg) (Sco + Dpz and EtOH + Dpz); and an FL (50 mg/kg) treatment group (Sco + FL50 and EtOH + FL50), orally administered over the 4-week experimental period. RESULTS: FL50 significantly reduced EtOH-induced increase in AST and ALT levels. FL50 treatment reduced EtOH-impaired step-through latency time in the PA test, and Sco- and EtOH-induced dementia escape latency times in the MWM test. Moreover, anticholinergic effects of Sco and EtOH on the brain were reversed by FL50, through the attenuation of AChE activity and elevation of ACh concentration. FL50 elevated ERK1/2 protein expression and increased p-CREB (ser133) in hippocampus brain tissue, according to Western blot and immunohistochemistry analysis, respectively. CONCLUSION: Overall, these results suggest that FL may be considered an efficacious intervention for Sco- and EtOH-induced dementia, in terms of reversing cognitive impairment and neuroplastic dysfunction.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.559-571
• /
• 2003

ENUM(tElephon NUmbering Mapping) is protocol that brings convergence between PSTN Networks and IP Networks using a unique worldwide E.164 telephone number as an identifier between different communication infrastructure. The mechanism provides a bridge between two completely different environments with E.164 number; IP based application services used in PSTN networks, and PSTN based application services used in IP networks. We propose a new way to organize and handle ENUM Tier 2 name servers to improve performance at the name resolution process in ENUM based application service. We build an ENUM based network model when NAPTR(Naming Authority PoinTeR) resource record is registered and managed by area code at the initial registration step. ENUM promises convenience and flexibility to both PSTN and IP users, yet there is no evidence how much patience is required when users decide to use ENUM instead of non-ENUM based applications. We have estimated ENUM response time, and proved how to improve performance up to 3 times when resources are managed by the proposed mechanism. The proposition of this thesis favorably influences users and helps to establish the policy for Tier 2 name server management.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.67-75
• /
• 2008

It is interesting to note that distinct element method has been used extensively to model the response of micro and discontinuous behavior in geomechanics. Impressive advances related to response of distinct particles have been conducted and there were difficulties in considering fluid effect simultaneously. Current distinct element methods are progressively developed to solve particle-fluid coupling focused on fluid flow through soil, rock or porous medium. In this research, numerical simulations of fluid injection into particulate materials were conducted to observe cavity initiation and propagation using distinct element method. After generation of initial particles and wall elements, confining stress was applied by servo-control method. The fluid scheme solves the continuity and Navior-Stokes equations numerically, then derives pressure and velocity vectors for fixed grid by considering the existence of particles within the fluid cell. Fluid was injected as 7-step into the assembly in the x-direction from the inlet located at the center of the left boundary under confining stress condition, $0.1MP{\alpha}\;and\;0.5MP{\alpha}$, respectively. For each simulation, movement of particles, flow rate, fluid velocity, pressure history, wall stress including cavity initiation and propagation by interaction of flulid-paricles were analyzed.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.11
• /
• pp.215-222
• /
• 2018

In this paper, the research on the energy storage system adapting super-capacitor has been performed. The most advanced features compared to the conventional lead-acid battery systems is that it can obtain high power capability due to the super capacitor power characteristics. The suggested system can attain high power in short times and achieve high power quality improvements. The application areas are power quality improvement system, motor start power which requires high power during transient times. The energy conversion system consists of bi-directional converter and inverter and advantages of high speed, high power charging and discharging performances. The design steps for the two loop controller of the bi-directional inverter are suggested and verified by the experiment and manufacturing. The two loop controller design starts from linearized transfer function which is calculated from the state averaging model including state decoupling method. The current controller requirements are 20% overshoot and settling time and voltage controller are no overshoot and settling time which is 10 times longer than current controller. The design is verified from the step input response. The designed controllers have unity power factor characteristics and thus can improve the power quality of the grid. It also has fast response time and zero steady state error.

• Journal of Intelligence and Information Systems
• /
• v.25 no.3
• /
• pp.221-238
• /
• 2019

Recently, companies and public institutions have been actively introducing chatbot services in the field of customer counseling and response. The introduction of the chatbot service not only brings labor cost savings to companies and organizations, but also enables rapid communication with customers. Advances in data analytics and artificial intelligence are driving the growth of these chatbot services. The current chatbot can understand users' questions and offer the most appropriate answers to questions through machine learning and deep learning. The advancement of chatbot core technologies such as NLP, NLU, and NLG has made it possible to understand words, understand paragraphs, understand meanings, and understand emotions. For this reason, the value of chatbots continues to rise. However, technology-oriented chatbots can be inconsistent with what users want inherently, so chatbots need to be addressed in the area of the user experience, not just in the area of technology. The Fourth Industrial Revolution represents the importance of the User Experience as well as the advancement of artificial intelligence, big data, cloud, and IoT technologies. The development of IT technology and the importance of user experience have provided people with a variety of environments and changed lifestyles. This means that experiences in interactions with people, services(products) and the environment become very important. Therefore, it is time to develop a user needs-based services(products) that can provide new experiences and values to people. This study proposes a chatbot development process based on user needs by applying the design thinking approach, a representative methodology in the field of user experience, to chatbot development. The process proposed in this study consists of four steps. The first step is 'setting up knowledge domain' to set up the chatbot's expertise. Accumulating the information corresponding to the configured domain and deriving the insight is the second step, 'Knowledge accumulation and Insight identification'. The third step is 'Opportunity Development and Prototyping'. It is going to start full-scale development at this stage. Finally, the 'User Feedback' step is to receive feedback from users on the developed prototype. This creates a "user needs-based service (product)" that meets the process's objectives. Beginning with the fact gathering through user observation, Perform the process of abstraction to derive insights and explore opportunities. Next, it is expected to develop a chatbot that meets the user's needs through the process of materializing to structure the desired information and providing the function that fits the user's mental model. In this study, we present the actual construction examples for the domestic cosmetics market to confirm the effectiveness of the proposed process. The reason why it chose the domestic cosmetics market as its case is because it shows strong characteristics of users' experiences, so it can quickly understand responses from users. This study has a theoretical implication in that it proposed a new chatbot development process by incorporating the design thinking methodology into the chatbot development process. This research is different from the existing chatbot development research in that it focuses on user experience, not technology. It also has practical implications in that companies or institutions propose realistic methods that can be applied immediately. In particular, the process proposed in this study can be accessed and utilized by anyone, since 'user needs-based chatbots' can be developed even if they are not experts. This study suggests that further studies are needed because only one field of study was conducted. In addition to the cosmetics market, additional research should be conducted in various fields in which the user experience appears, such as the smart phone and the automotive market. Through this, it will be able to be reborn as a general process necessary for 'development of chatbots centered on user experience, not technology centered'.