• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.479-484
• /
• 2000

The reliable estimation of the system parameters and the accurate prediction of the system behavior are important to design tunnel safely and economically. Therefore, the back analysis using the field measurements data is useful to evaluate the geotechnical parameter for tunnel. In the back analysis method, the selection of initial value and uncertainty of field measurements influence significantly on the analysis result. In this paper, to overcome uncertainty of field measurements, we performed the back analysis using the displacement data gained at each step of excavation and support.

• Journal of the Korean Statistical Society
• /
• v.35 no.3
• /
• pp.225-238
• /
• 2006

This paper considers noninformative priors for the scale parameter of exponential distribution when the data are collected in step stress accelerated life tests. We find the Jeffreys' and reference priors for this model and show that the reference prior satisfies first order matching criterion. Also, we show that there exists no second order matching prior in this problem. Some simulation results are given and we perform Bayesian analysis for proposed priors using some data.

• Geomechanics and Engineering
• /
• v.31 no.1
• /
• pp.113-127
• /
• 2022

The undrained shear strength of soil is considered one of the engineering parameters of utmost significance in geotechnical design methods. In-situ experiments like cone penetration tests (CPT) have been used in the last several years to estimate the undrained shear strength depending on the characteristics of the soil. Nevertheless, the majority of these techniques rely on correlation presumptions, which may lead to uneven accuracy. This research's general aim is to extend a new united soft computing model, which is a combination of random forest (RF) with grasshopper optimization algorithm (GOA) to the pile set-up parameters' better approximation from CPT, based on two different types of data as inputs. Data type 1 contains pile parameters, and data type 2 consists of soil properties. The contribution of this article is that hybrid GOA - RF for the first time, was suggested to forecast the pile set-up parameter from CPT. In order to do this, CPT data and related bore log data were gathered from 70 various locations across Louisiana. With an R² greater than 0.9098, which denotes the permissible relationship between measured and anticipated values, the results demonstrated that both models perform well in forecasting the set-up parameter. It is comprehensible that, in the training and testing step, the model with data type 2 has finer capability than the model using data type 1, with R² and RMSE are 0.9272 and 0.0305 for the training step and 0.9182 and 0.0415 for the testing step. All in all, the models' results depict that the A parameter could be forecasted with adequate precision from the CPT data with the usage of hybrid GOA - RF models. However, the RF model with soil features as input parameters results in a finer commentary of pile set-up parameters.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.59-70
• /
• 2003

We estimated the spectrum decay parameter $\chi$ and the stress parameter ($\Delta$$\sigma$) in southeastern Korea. Especially, we propose a procedure to compute site-independent $\chi$$_{q}$ and dependent $\chi$$_{s}$ values, separately, This procedure is to use the coda normalization method for the computation of site independent Q or corresponding $\chi$$_{q}$ value as the first step followed by the next step, the computation of $\chi$$_{s}$ values for each site using the given $\chi$$_{q}$ value evaluated at the first step, For the estimation of stress parameter, we used seismic data monitored from three earthquakes occurred near Gyeongju in 1999 with the method of Jo and Baag, In addition, we simulated strong ground motion using the $\chi$ value and the stress parameter, In this case, we calculated the $\chi$ value with conventional method. The $\chi$ value of 0.016+0.000157R and the stress parameter of 92-bar was applied to the stochastic simulation, At last, we derived seismic attenuation equation using results of the stochastic prediction, and compared these results with some others reported previously.ported previously.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.389-391
• /
• 1999

영상 압축 기법에는 여러 가지 알고리즘을 적용되고 있다. 이런 알고리즘들에는 주파수 영역 중복을 제거하기 위한 DCT, 시간 중복성 제거를 위한 움직임 측정, 압축기법에 의해서 만들어진 정보를 부호화하는 VLC들이 있다. 이런 부호화 알고리즘들은 부호화기를 구현하는데 많은 시간을 요구하며 특히 움직임 추정은 부호화기의 절반에 가까운 시간을 소비한다. 움직임 측정 기술의 복잡도는 search algorithm, cost function, search range parameter의 요인으로 나타낼 수 있다. 본 논문에서는 기존의 Full Search 알고리즘 대신에 three-step 알고리즘을 사용하여 움직임 측정 시간을 줄였다. Full Search 알고리즘은 search area에서 모든 지역에 대해 cost function을 사용하여 이전 블록과 얼마나 유사한지를 조사한다. 따라서 이전 블록과 가장 유사한 부분을 찾는 좋은 방법이지만 그만큼 시간이 많이 사용한다. Three-step 알고리즘은 search area의 일정 지역에 대해 cost function를 사용하여 이전 블록과의 유사성을 찾는 fast 알고리즘이다. Three-step 알고리즘을 사용한 경우 기존의 full search 알고리즘을 사용할 때 보다 60% 정도의 시간이 단축되었다. 그리고 생성되는 압축 데이터의 크기는 full search 알고리즘을 사용할 때 보다 많이 차지한다. 생성되는 H.263파일의 화질에서는 Three-step 알고리즘을 사용한 경우일지라도 full search 알고리즘을 사용한 경우와 거의 비슷한 화질을 보여준다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.367-372
• /
• 2001

Feature restoration is that restore feature to 3D solid model using the feature information in STEP AP224. Feature is very important in CAPP, but feature information is defined very complicated in STEP AP224. This paper recommends the algorithm of extraction the feature information in physical STEP AP224file. This program import STEP AP224 file, parse the geometric and topological information, the tolerance data, and feature information line-by-line. After importation and parsing, store data into database. Feature restoration module analyze database including feature information, extract feature information, e.g. feature type, feature's parameter, etc., analyze the relationship and then restore feature to 3D solid model.

• 연구논문집
• /
• s.31
• /
• pp.65-75
• /
• 2001

A dynamic model of pump having one step gearbox and two step gearbox is developed by the lumped parameter method. The model accounts for shafts, ball bearings and journal bearings flexibilities, gyroscopic effects and the force couplings among the transverse and torsion motions due to gearing. Excitation forces of pump having one step gearbox and two step gearbox are considered as the mass unbalance of the rotors and gear transmission error which comes from the modified tooth surface. A Campbell diagram, in which the excitation sources caused by the mass unbalance of the rotors and the transmitted errors of the gearing are considered, shows that there are no critical speeds at the operating speeds. One step and two step gearboxes are manufactured and are estimated for vibration/noise, lubrication and performance.

• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.178-184
• /
• 1993

The procedure using equivalent time at reference temperature has been assessed for the estimation of kinetic parameters with experimental data. Kinetic studies of nonenzymatic browning reaction in model and food system were carried out with linearly increasing temperature method. These kinetic parameters, n, $k_{ref}$ and $E_a$ of the systems were evaluated from original data in one step by nonlinear least square regression. The one step procedure yielded efficiently accurate parameter estimation. Computer simulated data with the kinetic models were well consistent with experimental data (average correlation coefficient=0.96).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.1 s.307
• /
• pp.31-38
• /
• 2006

In this paper, we consider one-step-ahead control of waveform parameters (pulse amplitudes and lengths, and FM sweep rate) as well as detection thresholds for optimal range and range-rate tracking in clutter. The optimal control of the combined parameter set minimizes a tracking performance index under a set of parameter constraints. The performance index includes the probability of track loss and a function of estimation error covariances. The track loss probability and the error covariance are predicted using a hybrid conditional average algorithm The effect of the false alarms and clutter interference is taken into account in the prediction. Tracking performance of the one-step-ahead control is presented for several examples and compared with a control strategy heuristically derived from a finite horizon optimization.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.439-444
• /
• 2016

The method for extracting the SPICE model parameter of Schottky diode under DC forward bias is proposed. A method for improving the accuracy of the SPICE model parameter at various temperatures is proposed. Three analysis steps according to the magnitude of the current is used in order to extract the parameters effectively. At each analysis step, initial parameters are calculated by using the current-voltage equations and the Levenberg-Marquardt analysis is proceeded. To verify the validity of the proposed method, the SPICE model parameters for the BAT45 and FSV1045 under DC forward bias is extracted. Schottky diode currents obtained from the proposed method shows the average relative error of 6.1% and 9% compared with the measured data for the BAT45 and FSV1045 sample at various temperatures.