• Journal of Powder Materials
• /
• v.10 no.6
• /
• pp.448-455
• /
• 2003

$TiO_2$ nanopowder has been synthesized by means of the flame method using a precursor of titanium tetraisopropoxide (TTIP, Ti$(OC_3H_7)_4)$. In order to clarify the effect of cooling rate of hot flame on the formation of $TiO_2$ crystalline phases, the flame was controlled by varying the mixing ratio and the flow rate of gases. Anatase phase was predominantly synthesized under the condition having the steep cooling gradient in flame, while a slow cooling gradient enabled to form almost rutile $TiO_2$ nanopowder of above 95%.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.2
• /
• pp.1-8
• /
• 2002

The aim of this study was to generate systemic data for the aquatic plant distribution according to water depth and crossing slope in the shoreline. The results of this study were as follows; 1. Anxiety to 0 near area Bidens frondosa, Scirpus tabernaemontani, Carex dispalata etc. total class 21 observe, and Phragmites communis, Iris pseudoacorus etc. class 6 of anxiety 0-70cm extent examined. Class 21 of anxiety observed all such as Bidens frondosa, Scirpus tabernaemontani, Carex dispalata in near area to 0, and Phragmites communis, Iris pseudoacorus etc. class 6 of anxiety 0-70cm extent examined. Anxiety 70-100cm extent Nymphoides indica, Ttapa japonica etc.. class 2 appeared to line Zizania latifolia, Typha angustata back 2 papers, 130cm and examined that Nelumbo nucifera was limit anxiety state 230cm. 2. Aquatic plants of Phragmites communis, Zizania latifolia, Typha angustata etc. range mainly to gentle gradient of slant 10 degree low and distribution pattern was ranging by Zizania latifolia, Typha angustata, Phragmites communis period of ten days from deepwater place. Nelumbo nucifera was forming become independent stock keeping away invasion of plant that ability to breed was different because was prosperous. Slant 10 bores was growing near sleep in been strange steep slope earth and distribution of emerged plant appeared punily and emerged plant and swampy land plant were ranged extensively in gentle gradient of 10 degree low. 3. On lake surrounding plant when wish to do distribution of natural conditions reference need to. That is, gentle gradient and distribution form of steep slope earth are different, and same pitch must consider enough this because appear as distribution, distribution according to that some plant species were growing was different.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.149-151
• /
• 2005

We have studied the environmental effect on optical-NIR color gradients of 273 nearby elliptical galaxies. Color gradient is a good tool to study the evolutionary history of elliptical galaxies, since the steepness of the color gradient reflects merging history of early types. When an elliptical galaxy goes through many merging events, the color gradient can be get less steep or reversed due to mixing of stars. One simple way to measure color gradient is to compare half-light radii in different bands. We have compared the optical and near infrared half-light radii of 273 early-type galaxies from Pahre (1999). Not surprisingly, we find that $r_e(V)s$ (half-light radii measured in V-band) are in general larger than $r_e(K)s$ (half-light radii measured in K-band). However, when divided into different environments, we find that elliptical galaxies in the denser environment have gentler color gradients than those in the less dense environment. Our finding suggests that elliptical galaxies in the dense environment have undergone many merging events and the mixing of stars through the merging have created the gentle color gradients.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.41.1-41.1
• /
• 2010

It has been suggested that merging plays an important role in the formation and the evolution of early-type galaxies. Optical-NIR color gradients of early-type galaxies in high density environments are found to be less steep than those in low density environment, hinting frequent merger activities in early-type galaxies in high density environment. In order to confirm if the flat color gradient is the result of dry merger, we decided to look deeply to find merging features and get their relation with color gradient. We selected samples which show extreme values of optical-NIR color gradients based on the data of previous study, and observed them at Maidanak observatory 1.5m telescope with long exposure. After masking out overlaid sources, our analysis reveals that these galaxies do not have extreme color gradient values. High degree sky flat technique was used during observation to aid discovery of faint, extended features. However, flatness of detector (SNUCAM) was good enough, so we could not see any marked improvement in image quality compared to those using normal sky flats. Additionally we noticed a feature that looks like merging tidal tail in the CFHT archival image, but this does not show up on the image we obtained. This demonstrates that flatness and correct sky estimation is very important when we look for faint merging features. In future we plan to enlarge the number of the sample.

• Journal of Astronomy and Space Sciences
• /
• v.8 no.1
• /
• pp.53-61
• /
• 1991

UV light curve of 31 Cygni has been made from the IUE high dispersion specta. The depth of primary minimum of the light curve is 5.2 magnitudes because the B4 star's steep spectral gradient. The light curve has been analyzed by the method of Wilson and Devinney Differential Correction (WD). The radial velocities have been measured using the Mg II h lines. The spectroscopic elements have been determined by the method of WD. The change of the Mg II resonance doublet has been investigated based on the eight representative spectra taken at well distributed orbital phases.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.3-10
• /
• 1993

A new three-dimensional transition solid elements was presented for the automated three-dimensional adaptive h-refinement where the steep stress gradient exists. To be consistent with 8-node solid element with nonconforming modes in accuracy, these transition elements were improved through the addition of the associated nonconforming modes. Numerical examples show that the performance of the element and the applicability to 3D adaptations are satisfactory.

• Journal of Magnetics
• /
• v.2 no.2
• /
• pp.58-66
• /
• 1997

Recently, artificially modulated magnetic multilayer materials, for examples giant magnetoresistant magnetic head materials and magneto-optic recording materials in the wavelength of a blue laser beam, attract great attention in the electronics industry due to their unique properties derived from the modulated multilayer structure. Since the multilayer structure as well as amorphous structure, is non-equilibrium state in terms of free energy, an assessment of the thermal staibility in the multilayer structure is crucially importnat both for basic research and applications. In this review paper, effective microscopic interdiffusion process in the two dimensional multilayer structure will be described in terms of steep concentration gradient effect, strain effect and magnetic transition effect.

• Journal of Welding and Joining
• /
• v.10 no.2
• /
• pp.19-31
• /
• 1992

A numerical study was performed to investigate the flow field and the heat transfer characteristics occurring in high power density welding which is important in many fields of engineering applications. A two dimensional quasi-steady state of keyhole welding model is simulated by using the finite volume methods. It is shown that the shape of isothermal line is elliptic and the temperature gradient is very steep compared with other welding method and the welding speed has on welding width and observed beam power.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.567-574
• /
• 1991

In this study thermal stress generated in three ingot moulds(GC25) during the solidification process of aluminum were analyzed by the two-dimensional thermo-elasto-plastic theory. In temperature analysis, all of the three models are shown steep temperature rising each case in initial stage of cooling. In thermal stress analysis, all of three models took compressible stress on inside wall of the mould, and tensible along with on out side. Model 2 take place less compressible, tensible stress then model 1. But model 3. have similar as thermal stress as model 2. The analysis will made one possible to calculate an optimum mould shape whose thermal stress gradient becomes minimum.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.138-146
• /
• 2003

A critical issue in area-based stereo matching lies in selecting a fixed rectangular window size. Previous stereo methods doesn't deal effectively with occluding boundary due to inevitable window-based problems, and so give inaccurate and noisy matching results in areas with steep disparity variations. In this paper, a variable window approach is presented to estimate accurate, detailed and smooth disparities for three-dimensional structure reconstruction. It makes the smoothing of depth discontinuity reduced by evaluating corresponding correlation values and intensity gradient-based similarity in the three-dimensional disparity space. In addition, it investigates maximum connected match candidate points and then devise the novel arbitrarily shaped variable window representative of a same disparity to treat with disparity variations of various structure shapes. We demonstrate the performance of the proposed variable window method with synthetic images, and show how our results improve on those of closely related techniques for accuracy, robustness, matching density and computing speed.