• 한국방사선학회논문지
• /
• 제6권6호
• /
• pp.477-481
• /
• 2012

엑스선 회절분석기는 비파괴적인 방법으로 시료의 정보를 정성 및 정량적으로 분석할 수 있다. 엑스선 회절분석기에는 다양한 광학소자가 사용된다. 평행빔 광학소자는 광축에 평행한 빔을 통과시키고 발산하는 빔을 제거하는 역할을 한다. 와이어 컷 제작과 스테인리스 스틸 평판을 연마하여 평행빔 광학소자를 제작하였고 엑스선 영상장치를 이용하여 그 평행도를 평가하였다. 설계된 6 mrad과 매우 가까운 6.6 mrad의 평행도를 갖는 평행빔 광학소자를 제작하였다. 엑스선 영상을 이용하면 개개의 평판의 평행도를 예측할 수 있을 뿐만 아니라 다양한 광학소자 평가에도 사용될 수 있을 것이다.

• 한국주조공학회지
• /
• 제29권5호
• /
• pp.220-224
• /
• 2009

In order to investigate the microstructural morphology of the sulfide expected from the Fe-FeS phase diagram, a vacuum-sealed quartz tube where pure iron (99.9%) and sulfur (99.99%) powders were charged was heated upto $1000^{\circ}C$ in the electric resistance furnace, held for 96 hours and quenched in cold water and then, rod specimen was produced. Compositional difference of the sulfur between upper and lower parts of the rod was 7.5wt.% and segregation of the sulfur was gradually increased from the lower part to the upper one of the rod. The rod specimen was divided into three parts by the microstructural morphology of the sulfide. The upper part of the rod specimen revealed single phase FeS intermetallic. In the middle part of the specimen, hyper-eutectic microstructure where primary FeS was precipitated first and then, eutectic of $\alpha$-Fe and FeS was formed in the inter-dendritic region of the FeS. Especially, hypo-eutectic microstructure was appeared in the lower part of the specimen. After primary dendrite of $\alpha$-Fe solidified, FeS dendrite which included small amount of $\alpha$-Fe and FeS eutectic in the inter-dendritic region was formed.

• 한국지반공학회논문집
• /
• 제28권11호
• /
• pp.53-67
• /
• 2012

본 논문에서는 기존에 사용되던 철선 TDR계측선의 문제점을 해결하기 위해 스테인리스 스틸과 열수축튜브를 이용해 개량된 TDR계측선을 개발하여, 함수비에 대한 민감도를 높이고 노이즈를 줄이며 내구성을 향상시켜 TDR시스템의 현장적용성을 높였다. 개량된 TDR계측선을 이용하여 실내에서 포화도 변화실험과 아크릴모형실험을 수행하였으며, 실험결과 별도의 필터링 및 정량화 과정을 거치지 않은 초기 계측 그래프만으로 쉽게 포화, 불포화 및 건조구간을 파악할 수 있었다. 이후 대형 모형제방에 개량된 TDR센서를 설치하여 침투실험을 수행하였으며 그 결과, 실내시험과 같은 명확한 지하수 분포형태 파악이 가능하였으며, 침투 시간경과에 따른 각 구간의 지하수 분포변화를 파악할 수 있었고 손쉽게 모형제방의 침윤선을 작도할 수 있었다.

• 국제초고층학회논문집
• /
• 제7권1호
• /
• pp.17-32
• /
• 2018

This paper explores the function of a structural skin with an embossed surface applicable to use for tall building structures. The major diagrid system with a secondary embossed surface structure provides an enhanced perimeter structural system by increasing tube section areas and reduces aerodynamic loads by disorienting major organized structure of winds. A parametric study used to investigate an optimized configuration of the embossed structure revealed that the embossed structure has a structural advantage in stiffening the structure, reducing lateral drift to 90% compared to a non-embossed diagrid baseline model, and results of wind load analysis using computational fluid dynamics, demonstrated the proposed embossed system can reduce. The resulting undulating embossed skin geometry presents both opportunities for incorporating versatile interior environments as well as unique challenges for daylighting and thermal control of the envelope. Solar and thermal control requires multiple daylighting solutions to address each local façade surface condition in order to reduce energy loads and meet occupant comfort standards. These findings illustrate that although more complex in geometry, architects and engineers can produce tall buildings that have less impact on our environment by utilizing structural forms that reduce structural steel needed for stiffening, thus reducing embodied $CO^2$, while positively affecting indoor quality and energy performance, all possible while creating a unique urban iconography derived from the performance of building skin.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.301-303
• /
• 2003

The KSTAR(Korea Superconducting Tokamak Advanced Research) superconducting magnet system consist of 16 TF(Toroidal Field) and 14 PF(Poloidal Field) coils. Internally-cooled cabled superconductors will be used for the magnet system. The magnet system adopt a superconducting CICC (Cable-In-Conduit Conductor) type. The KSTAR PF 6, 7 CICCs use NbTi Superconducting cable with stainless steel 316LN conduit while the other PF CICC use Incoloy 908 conduit. For the fabrication of PF CICC, superconducting cables have been fabricated and the cable has the diameter of 22.3mm. A continuous CICC jacketing system is developed for the CICC jacketing and the jacketing system uses the tube-mill process, which consists of forming, welding, sizing and squaring procedures. The cabling and the jacketing process is described. The welding condition and design specification of CICCs are also discussed. The fabrication results including the geometrical specification and the void fraction will be discussed.

• 한국전산구조공학회논문집
• /
• 제21권3호
• /
• pp.287-294
• /
• 2008

이 연구에서는 교량 상부구조물의 보수 보강에 많이 사용되는 7연 강연선의 공용중 긴장력 관리를 위한 새로운 방법은 제안하였다. 제안된 스마트 강연선은 기존 강연선의 중앙 킹와이어를 강제튜브로 대체하고, 강제튜브의 내부에 FBG 광섬유센서를 설치하여 강연선의 변형률을 측정할 수 있도록 하였다. 내장된 센서를 통하여 이 스마트 강연선의 변형률을 쉽게 측정할 수 있으므로, 공용중 강연선의 긴장력을 모니터링할 수 있다. 본 연구에서 제안된 장력 모니터링 방법의 효용성을 증명하기 위하여 FBG센서 2개가 내장된 길이 7.0m인 스마트 강연선을 제작하고, 이를 길이 6.4m, 높이 0.6m인 RC T형 모형거더에 외장형 텐던으로 적용하였다. 그리고 이 시험거더에 대한 재하-제하시험을 실시하고 로드셀에서 계측된 긴장력과 스마트 강연선을 이용하여 예측한 긴장력을 비교하였다. 비교 결과, 제안된 스마트 강연선은 긴장력이 작용된 강연선의 장력을 정확하게 모니터링 하는데 유용함을 확인할 수 있었다.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.331-337
• /
• 2010

This study compared the macro and micro electrochemical characteristics at the local area of welding metal on dissimilar welding parts for type 304 stainless steel (SS) and type 316L SS. The materials are used for double wall gas pipe of duel fuel engine for a ship. The various potentiodynamic experiments were performed several times in 10% ${H_2C_2O_2}{\cdot}{H_2O}$ solution using macro and micro methods, respectively. The micro electrochemical experiments conducted to resolve at local area on cross-section of dissimilar welding materials by micro-droplet cell device. The micro-droplet cell techniques can be used almost electrochemical experiments to resolve corrosion characteristics of the limited electrode area of the metallic surface between wetted spot of working electrode and tip of sharpened capillary tube. The results of macro electrochemical experiments show that resistance of active dissolution reaction at welding zone was high due to low current density by formation of passivation protection film at passive region. According to the micro electrochemical experiment, the corrosion current density of welding zone and bond zone were relatively high.

• 한국지반환경공학회 논문집
• /
• 제9권2호
• /
• pp.61-65
• /
• 2008

본 연구에서는 PGSN(Pressurized Grouting Soil Nailing) 시스템이라는 가압 그라우팅 쏘일네일링 공법을 고안하였으며, 본 공법의 보강제의 길이변화 및 보강재의 변화 등의 설계인자에 따른 거동변화를 파악해 보기 위해 변위제어방식의 현장인발시험을 수행하였다. 본 연구에서 수행한 9차례의 현장인발시험에서 그라우트 주입비의 변화를 살펴 보기위해 계측을 수행하였으며, 단기거동특성을 평가하기 위해 일반 쏘일네일링 시스템과 비교해 보았다. 가압 그라우트 쏘일네일링 공법의 인발거동 특성을 통해, 중요한 설계인자인 주입압 및 그라우트 주입비 등의 영향을 살펴보았다. 시험 결과 가압효과에 따른 인발변형 특성은 중력식 그라우팅 쏘일네일에 비해 가압 그라우팅 쏘일네일의 경우 유발되는 변위량이 30~36% 정도 감소하였고, 보강재 변화에 따른 인발 특성을 살펴보면 이형철근에 비해 강관의 경우 유발되는 변위량이 31~32% 정도 감소하는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.362-367
• /
• 2007

Stent is a tiny structure made with either ceramic coating and/or bare metal. Being approximately $1{\sim}2 mm$ in diameter, it consists of holes, slots, or void space and is designed to cover entire medical lesions. Stent implantation into patients' arteries has been practiced for a little more than a decade in order to widen the blocked artery. The adoption of the stent has significantly improved the efficacy when compared with the previous medical practice by balloon angioplasty alone. Yet better biomedical performance of the stent is being demanded in order to eliminate the still existing problem of artery restenosis, which means the artery becomes narrowed again. Recent literature survey shows researches on ceramic coatings onto the stent surface, or material design to improve the mechanical response of the stent. This study focuses more on the material design and mechanical analysis. The results showed that the void configuration within the stent affects the mechanical response significantly. The rectangular shape was found to yield expansion at a relatively lower pressure than the elliptical slot for a slotted tube stent. The present results, when combined with research on coating at the stent surface, may provide stents with improved bio-medical performance.

• The Korean Journal of Physiology and Pharmacology
• /
• 제2권3호
• /
• pp.307-312
• /
• 1998

This study was performed to investigate the mechanism of central analgesic effects of antidepressants. Thirty four male rats were anesthetized with pentobarbital sodium (40 mg/kg, ip). A stainless steel guide cannula and a PE tube (PE10) were implanted into the lateral ventricle and cisterna magna area. Stimulating and recording electrodes were implanted into the incisor pulp and anterior digastric muscle. Electrodes were led subcutaneously to the miniature cranial connector sealed on the top of the skull with acrylic resin. The jaw opening reflex was used in freely moving rats, and antidepressants were administered intracisternally in order to eliminate the effects of anesthetic agents on the pain assessment and evaluate the importance of the central action site of antidepressants. After 48 hours of recovery from surgery, digastric electromyogram (dEMG) of freely moving rats was recorded. Electrical shocks (200 ${\mu}sec$ duration, 0.5-2 mA intensity) were delivered at 0.5 Hz to the dental pulp every 2 minute. Intracisternal administration of $15\;{\mu}g$ imipramine suppressed dEMG elicited by noxious electrical stimulation in the tooth pulp to $76{\pm}6%$ control. Intracisternal administration of $30\;{\mu}g$ desipramine, nortriptyline, or imipramine suppressed dEMG remarkably to $48{\pm}2,\;27{\pm}8,\;or\;25{\pm}5%$ of the control, respectively. Naloxone, methysergide, and phentolamine blocked the suppression of dEMG produced by intracisternal antidepressants from $23{\pm}2\;to\;69{\pm}4%,\;from\;32{\pm}5\;to\;80{\pm}9%,\;and\;from\;24{\pm}6\;to\;77{\pm}5%$ of the control, respectively. These results indicate that antidepressants produce antinociception through central mechanisms in the orofacial area. Antinociception of intracisternal antidepressants seems to be mediated by an augmentation of descending pain inhibitory influences on nociceptive pathways.