• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.227-234
• /
• 2001

The lifting and lowering supports method was recently developed in steel box girder bridge. It has many advantages by lifting and lowering of inner supports and filled concrete. This method reduces an amount of steel and height of girders. It is one of the methods used to effectively increase the use of structural material. However, if there is too much lifting of inner supports, it is possible to cause buckling of the compression flange or web panel. Therefore it needs a proper number of longitudinal and transvers stiffener.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.103-108
• /
• 2003

In the construction of mountain tunnels, reaction forces of the legs of steel arch supports against the ground are often expected to support the ground being excavated. In these cases, a stress concentration occurs in the ground directly under the support legs. If the bearing capacity of the ground is insufficient or displacement is not effectively constrained, the local failure of the ground under the support legs or settlement of the tunnel supports due to large deformation could result. It is therefore necessary to reinforce the support legs to reduce settlement. As a means of reducing settlement, wing-ribbed steel arch supports are well used. In this study, with the aim of finding a way to quickly reduce the settlement of steel arch support legs, effectiveness of a new type of wing ribs to reinforce steel arch supports was investigated through laboratory testing.

• Steel and Composite Structures
• /
• 제51권5호
• /
• pp.575-586
• /
• 2024

Steel arch supports are used in mines and underground structures to provide stability. Most of the supports are made up of overlapping arches. They can behave either yieldingly or unyieldingly. If the normal force at any point of overlapping equals the slip resistance, the slide occurs. This paper presents a solution procedure for determining the load-carrying capacity of steel arch supports in the yielding implementation. This solution considers the effects of several significant elements, including differing materials and the number of clamps in yielding friction joints. The direct stiffness method is applied. The solution contains geometric, physical, and structural nonlinearity. The results obtained from numerical modeling using the provided procedure are compared to laboratory tests conducted at GIG Katowice in 2012. They show a good correlation with previously collected data from equivalent laboratory conditions.

• 터널과지하공간
• /
• 제18권3호
• /
• pp.226-238
• /
• 2008

숏크리트의 지보성능을 보완하기 위해 사용되는 강지보재는 매우 효과적인 것으로 평가되지만 강지보재 종류별 성능이 파악되지 못하여 설계에 제대로 반영하지는 못하고 있다. 본 연구에서는 여러 가지 강지보재에 의해 보강된 숏크리트의 특성을 휨인성 시험을 통하여 파악하고, 그 결과를 수치해석에 반영하고자 하였다. 시험결과 철근보강 숏크리트는 H 형강이나 격자지보에 비해 지보능력이 다소 못 미치는 것으로 나타났는데, 이는 시험체가 휨인장 파괴를 유도하기에는 다소 짧아서 전단파괴가 발생하였기 때문인 것으로 나타났다. 수치해석을 이용한 안정성 해석 시 숏크리트와 강지보재를 별도로, 그리고 이들 복합체에 대한 등가물성을 구하여 각각 해석한 바 두 결과가 잘 일치하여 등가물성을 이용한 복합체 해석으로도 간편하게 강지보재의 효과를 모사할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.143-153
• /
• 2006

본 연구에서는 지점부 단면형고 확대를 도입한 연속 프리스트레스트 Steel I-Girder의 휨거동 특성을 파악하고자 하였다. 긴장력 도입 후 정적 휨 재하실험을 수행 하여 지점부 단면형고 확대도입 및 강연선의 배치양상, 도입된 긴장력을 실험변수로 하여 그에 따른 내하력 향상정도를 평가하였다.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.715-728
• /
• 2022

Closed steel supports of different shapes are used in mining and underground constructions. The supports are prefabricated from rolled, usually robust, steel profiles. The load carrying capacity of a support is considerably influenced by the active loading and passive forces. The passive forces are induced by interactions between the support and the surrounding rock mass. The analysis herein comprises three parts: The first part consists of structural geometry processing. The second part involves finding the numerical solution of a statically indeterminate structure for a specified load. The third part is calculation of the load carrying capacity and the components of internal forces and deformations. For this, the force method and numerical integration are used. The Winkler model is applied when the support interacts with the surrounding environment. The load carrying capacity is limited by the slip resistance of the connected parts and it is limited by reaching the ultimate state of the profile. This paper serves as a comprehensive reference for the determination of the load carrying capacity of closed steel supports and includes stepwise derivations of the governing formulas.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.261-274
• /
• 1998

이 연구에는 가축성 강재지보에 대한 실내실험 및 현장실험 결과가 제시된다. 시험지보는 단위중량이 25.8kg/m인 Gloken profile U 빔 3매를 조립하여 제작되었다. 양단이 힌지로 지지되는 반원형 및 아치형 지보에 대한 정역학적인 해석이 실시되었다. 실험된 U빔의 형상계수는 1.35이었고 지보형태에 따른 2차 소성힌지의 위치를 산정하였다. 천장부에서 단일집중하중을 받는 아치형 지보의 내하력을 조사하여 이를 지보 각주 길이의 함수로 나타내었다. U 빔 연결부의 결합토크를 변화시키는 실물크기 지보시험을 수행하여 시험지보의 가축특성을 파악하였으며, 결합토크를 설계하는 방법을 연구하였다. 결합토크가 21kg.m 인 시험지보를 현장에 설치하고 계측한 결과 전형적인 가축현상을 관찰할 수 있었다.

• Steel and Composite Structures
• /
• 제4권3호
• /
• pp.211-226
• /
• 2004

This paper presents a study on the structural behaviour of modular steel scaffolds through both experimental and numerical investigations. Three one-storey and three two-storey modular steel scaffolds were built and tested to failure in order to examine the structural behaviour of typical modular steel scaffolds. Details of the tests and their test results were presented in this paper. Moreover, an advanced non-linear analysis method was employed to evaluate the load carrying capacities of these scaffolds under different support conditions. Comparisons between the experimental and the numerical results on the structural behaviour of these modular steel scaffolds were also presented. Moreover, the restraining effects of external supports in practical situations were also studied through finite element methods. The predicted load carrying capacities and deformations at failure of these models under partially restrained conditions were found to be close to the experimental results. A codified design method for column buckling with modified slenderness ratios was adopted for practical design of modular steel scaffolds.

• 대한토목학회논문집
• /
• 제37권2호
• /
• pp.357-367
• /
• 2017

강지보로 보강된 터널 숏크리트 라이닝은 그 기하학적 형태로 인해 외부하중이 작용됨에 따라 휨 모멘트와 축력이 동시에 발생하게 된다. 숏크리트는 축력 수준에 따라 휨 강성이 달라지며, 이로 인한 심한 비선형 거동을 보인다. 또한 강지보 유형에 따라 역학적으로 상이한 지보 성능을 가진다. 본 연구에서는 화이버 단면 요소(fiber section element)를 이용해 압축력과 휨 모멘트를 동시에 받는 강지보-숏크리트 라이닝의 비선형합성거동을 평가할 수 있는 수치모델을 제시하였고, 이를 활용해 강지보 유형에 따른 합성지보 성능을 수치적으로 분석하였다. 또한, 지반-구조물 상호작용을 구현하기 위해 지반의 연화(softening) 거동을 고려하여 수정된 hyperbolic 모델을 제시하였다. 제시된 수치모델은 기존 아치형 실험체의 하중실험 결과와 해석결과를 비교하여 검증하였으며, 수치해석을 통해 강지보 유형에 따른 라이닝의 합성거동을 분석하였다. 해석결과를 통해, 복철근 형태의 강지보가 기존 H형강과 유사한 극한 하중 지지력을 가지는 것을 확인하였다. 또한 강재량 증가가 잔류 지지력 향상에 크게 기여하였으며, 지보재 주변의 지반강성이 증가함에 따라 강지보 유형에 따른 최대 하중지지력 개선 효과는 작아짐을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.205-212
• /
• 1999

Recently, unexpected cracks in the concrete deck slab of composite steel bridges have been widely reported at an early age of concrete placing due to the concrete placing sequence and methods. Accordingly, the analytical research was carried out to verify the negative moment at an internal supports due to the several concrete pouring sequence and to determine the reasonable concrete placing method on the deck slab of composite steel bridge. The results show that the conventional concrete-placing method, which pours concrete first on the positive moment regions and then negative regions, leads to the minimum moment at an internal supports. However, the conventional method produces two impractical construction joints on every spans and makes field engineer to pour concrete continuously. In conclusion, this concrete-placing method was verified to be reasonable only when the construction joint was placed at the $\frac{5}{8}l{\sim}\frac{6}{8}l$ location of the middle span.