• 한국공간구조학회논문집
• /
• 제24권3호
• /
• pp.79-86
• /
• 2024

Recently, steel dampers are widely used as seismic reinforcement devices. Steel dampers have the advantage of being easy to manufacture and being able to absorb a lot of energy through stable hysteresis behavior. However, there is a possibility that the steel damper may be damaged due to fatigue caused by repeated seismic loads. In this study, the seismic performance of steel dampers and engineering plastic dampers with different physical characteristics were compared and analyzed. In addition, numerical analysis was performed on a hybrid damper that combines a steel damper and an engineering plastic damper. It is more effective to apply engineering plastic dampers to structures that experience significant displacement due to seismic loads. The behavior of hybrid dampers combining steel dampers and engineering plastic dampers is dominated by steel dampers. A hybrid damper in which an engineering plastic damper yields after a steel damper yields can effectively respond to various seismic loads and secure high ductility and excellent seismic performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.257-262
• /
• 2003

Base isolation bearings are known as an effective system to Protect bridges from the earthquake damage. There are many types of base isolation bearings in the market. Among them, steel hysteretic damper, made of mild steel and one of the oldest ones, has some good features. Since steel hysteretic damper is made of steel and has simple structure, it is cheeper and easier to maintain than other types. Despite the advantages, steel hysteretic damper with pin-type elements has no application in Korea. The steel hysteretic damper with pin-type elements are tested to examin the basic characteristics and to evaluate antiseismic performance. In this paper, the results of the test are presented.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.865-876
• /
• 2022

The slit members have lower strength and lower stiffness, which might lead to lower energy dissipation. In order to improve the seismic performance of the slit members, the paper proposes the shear lead damper, which has stable performance and small deformation energy dissipation capacity. Therefore, the shear lead damper can set in the vertical silts of the slit member to transmit the shear force and improve energy dissipation, which is suitable for the slit member. Initially, the symmetrical teeth-shaped lead damper was tested and analyzed. Then the staggered teeth-shaped lead dampers were developed and analyzed, based on the defect analysis and build improvements of the symmetrical specimen. Based on the parameter analysis, the main influence factors of hysteretic performance are the internal teeth, the steel baffles, and the width and length of damper. Finally, the theoretical analysis was presented on the hysteretic curve. And the skeleton curve and hysteresis path were identified. Based on the above theoretical analysis, the design method was proposed, including the damping force, the hysteresis model and the design recommendations.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권1호
• /
• pp.86-94
• /
• 2023

본 연구에서는 강재 슬릿댐퍼를 대상으로 하여 면외 변형을 구속할 수 있는 보완상세를 제시하고, 제안상세 적용 유무와 댐퍼의 형상비를 변수로 하여 일정진폭 가력실험을 수행하였다. 실험결과에 따라 제안상세가 적용된 슬릿댐퍼의 반복이력은 설정된 변수 범위에서 모두 안정적인 방추형의 이력거동을 나타내었으며 종국거동까지 댐퍼의 면외변형은 관찰되지 않았다. 누적변형각 분석을 통해 제안상세가 적용된 댐퍼 시스템은 대조군에 비해 월등히 큰 소성변형능력을 확보할 수 있음을 확인하였다. 이러한 구조적 효과(구속패널효과)는 슬릿댐퍼의 형상비가 작을수록 크게 나타났다. 관련 국외기준을 참고하여 제안상세 적용유무에 따른 슬릿댐퍼의 피로곡선을 작성하고 예측곡선 제시를 위한 매개변수를 도출하였다. 본 연구의 결과를 토대로 향 후 다양한 종류의 제진장치의 구조성능에 대한 정량적인 비교가 가능할 것으로 판단된다.

• 한국강구조학회 논문집
• /
• 제24권4호
• /
• pp.371-382
• /
• 2012

기존의 전단벽 시스템은 커플링보를 강하게 설계하는 경우가 많아 상대적으로 내력 및 강성이 낮은 콘크리트 코어와 특정층에 손상이 발생되기 쉬워 건물의 연성이 저하된다. 전단벽 시스템의 연성능력 및 내진성능을 향상시키기 위해 본 연구에서 강성은 기존의 커플링보 이상으로 발휘되면서 설계하중에 따라 내력을 용이하게 변화시킬 수 있는 강재이력댐퍼를 커플링보에 적용하였다. 강재이력댐퍼는 2단으로 직렬 연결된 형상으로 제안하였고, 제안된 강재이력댐퍼의 구조성능을 검증하기 위하여 정적실험을 수행하였다. 또한 FEM 해석결과를 실험결과와 비교 검증하고 강재이력댐퍼의 초기강성, 에너지 흡수능력, 변형능력 등을 분석하여 설계 근사식을 제안하였다.

• 한국공간구조학회논문집
• /
• 제6권2호
• /
• pp.115-121
• /
• 2006

최근 바람 및 지진에 대한 진동제어를 목적으로 한 저항복점강재를 이용한 댐퍼가 많이 사용되고 있다. 그러나 전체 구조물의 진동에 영향을 미치는 저항복점강재의 동적특성 및 지진에너지 소산효과는 명확히 밝혀지지 않고 있다. 본 연구에서는 저항복점감재에 대한 반복재하실험 결과 및 저항복점감재를 정착한 3층 규모의 구조물에 대하여 실시한 강제진동시험의 결과에 대해 보고한다. 또한 저항복점강재의 지진에너지 소산양의 정량적인 평가를 위하여 수학적 이력형모델 및 등가선형해석법을 이용하여 평가한 결과에 대해 보고한다.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.33-39
• /
• 2018

This study performed experimental validation of the hysteretic steel slit damper's basic and dependent characteristics, which should be considered for the design. The basic characteristic of the steel slit damper is used for determining design properties of non-linear analysis, such as yielding strength, yielding displacement, elastic stiffness and post-yielding stiffness. In order to evaluate dependent characteristics of the hysteretic steel slit damper, repeated deformation capacity with respect to the displacement, velocity and aspect ratio of the damper was evaluated. In this study, steel slit damper, which is widely used in Korea, was considered. The slit dampers with 55kN and 240kN of yielding strength were produced and tested. It was concluded that the slit damper's hysteresis behavior was affected by the dependent characteristics: displacement, velocity and aspect ratio. In other words, the steel slit damper's behavior was stable within limit displacement, and aspect ratio of the strut affected repeated deformation capacity of the damper subjected to large deformation. In addition, it was observed that the repeated deformation capacity abruptly decreased at the high speed range (${\geq}60mm/sec$). Furthermore, the experimental results were evaluated with the criterion of the damping device specified in ASCE7-10.

• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.363-371
• /
• 2022

Traditional metal dampers have disadvantages such as a higher yield point and inadequate adjustability. The experimental results show that the low yield point steel has superior energy dissipation hysteretic capacity and can be applied to seismic structures. To overcome these deficiencies, a novel compound metal damper comprising both low yield point steel plates and common steel plates is presented. The optimization objectives, including "maximum rigidity" and "full stress state", are proposed to obtain the optimal edge shape of a compound metal damper. The numerical results show that the optimized composite metal damper has the advantages such as full hysteresis curve, uniform stress distribution, more sufficient energy consumption, and it can adjust the yield strength of the damper according to the engineering requirements. In view of the mechanical characteristics of the compound metal damper, the equivalent model of eccentric cross bracing is established, and the approximate analytical solution of the yield strength and the yield displacement is proposed. A nonlinear simulation analysis is carried out for the overall aseismic capacity of three-layer-frame structures with a compound metal damper. It is verified that a compound metal damper has better energy dissipation capacity and superior seismic performance, especially for a damper with double-objective optimized shape.

• 한국전산구조공학회논문집
• /
• 제34권6호
• /
• pp.437-443
• /
• 2021

본 논문에서는 중심가새골조의 내진성능 향상을 위한 전단항복 댐퍼의 개발을 수행하였다. 실용성이 높은 댐퍼의 개발을 위해서 구조적 간결성과 내진성능의 신뢰도에 중점을 둔 상세를 제시하기 위해 노력하였다. 지진 발생 시 에너지 소산 메커니즘에 대한 신뢰도가 높고, 지진 발생 후 항복 부위의 교체가 쉬운 형태로 고안되었다. 댐퍼의 끼움강판 치수를 변경함으로써 전단, 휨-전단, 휨 메커니즘을 조절하여 설계할 수 있다. 비선형 유한요소해석을 통해서 댐퍼의 항복 메커니즘에 따른 구조적 거동을 분석하였고, 전단항복 메커니즘 댐퍼가 휨항복 메커니즘 댐퍼에 비해 강성, 강도, 에너지 소산 측면에서 우수한 성능을 가지고 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.455-466
• /
• 2022

Despite the considerable lateral stiffness and strength of the Concentrically Braced Frame (CBF), it suffers from low ductility and low seismic dissipating energy capacity. The buckling of the diagonal members of the CBF systems under cyclic loading ended up to the shortcoming against seismic loading. Comprehensive researches have been performing to achieve helpful approaches to prevent the buckling of the diagonal member. Among the recommended ideas, metallic damper revealed a better success than other ideas to enhance the behavior of CBFs. While metallic dampers improve the behavior of the CBF system, they increase constructional costs. Therefore, in this paper, a new steel damper with flexural mechanism is proposed, which is investigated experimentally and numerically. Also, a parametrical revision was carried out to evaluate the effect of thickness, slenderness ratio, angle of the main plate, and height of the main plates on the proposed damper. For the parametrical study, 45 finite element models were analyzed and considered. Experimental results, as well as the numerical results, indicated that the proposed damper enjoys a stable hysteresis loop without any degradation up to a high rotation equal to around 31% that is significantly considerable. Moreover, it showed a suitable performance in case of ductility and energy dissipating. Besides, the necessary formulas to design the damper, the required relations were proposed to design the elements outside the damper to ensure the damper acts as a ductile fuse.