• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2011년도 춘계 종합학술대회 논문집
• /
• pp.47-48
• /
• 2011

본 논문은 건축에서 현재 최신기술인 스틸하우스 공법을 활용하여 한 건축물에서 다른 건축물로 변경시킬 때 자재들이 자동으로 변경되어 필요한 정부를 제공해주는 애플리케이션을 개발하였다. 현재 많은 건축구조물은 건축주만이 다룰 수 있는 분야이며 일반인들이 변경은 어려운 실정이다. 본 본문에서는 이러한 단점을 해결해 주는 프로그램으로서 건축의 변경, 정보제공 등이 가능하여 건축변경자동시스템의 기초가 될 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1334-1337
• /
• 2007

A steel pallet to carry lighter logistic articles is developed based on the DFSS(design for Six Sigma) methodology. Combining the conventional DFSS(Design For Six Sigma) methodology with that of VE(Value Engineering) is the novel feature of this paper to achieve maximum cost reduction. In this paper, systematical steps to achieve the required structural spec's are presented by conventional DMEDI(Define-Measure-Explore-Develop-Implement) process. To imply the target costing, evaluation of functions consisting of the pallet has been performed by value methodology. Then best design concept is selected in the Explore step, following structural optimization utilizing FEM. Finally the performance of prototype is investigated by pilot test in the Implement step. The developed steel pallet is being commercialized in the fields of automated ware house.

• 기술혁신연구
• /
• 제10권1호
• /
• pp.174-200
• /
• 2002

Technological capabilities of POSCO (Pohang Iron & Steel Co.) have been developed through acquisition, catch-up, and generation stage. In 1970s standardized operation technologies were acquired based on Japan's technological cooperation. The prime route of technological acquisition was overseas training and operation technologies were articulated by mock and real operation. In 1980s POSCO focused to catch-up advanced technologies through in-house R&D activities. Technological informations were broadly accumulated, task force teams were constructed for important technological tasks, and the scope of technological innovation covered nearly all fields. In 1990s POSCO launched long-term projects based on the large-scale investment and challenged the new fronts of steel technologies. Frontier technologies such as smelting reduction and thin slab casting were early commercialized and new technological concepts were emerged. In conclusion, this article suggests some implications on the development of technological capabilities in Korea.

• 설비공학논문집
• /
• 제27권4호
• /
• pp.228-232
• /
• 2015

The water supply galvanized steel pipes of apartment buildings in Bucheon city constructed with building permission before 1994 have many problems such as leaks, the water containing rust, and low water pressure due to corrosion. Therefore, this study aims to find a way to renew the water supply pipes under investigation through a survey. As a result, when replacing the galvanized steel pipe with the corrosion-resistant pipe, the water supply system should also be changed from the gravity tank system to the booster pump system and the hygienic water storage tank. It is necessary to redraft the long-term repair plan including the replacement of the water supply system. Also, it is necessary to save the allowance reserve according to the modified long-term repair plan.

• 한국정밀공학회지
• /
• 제26권10호
• /
• pp.89-96
• /
• 2009

In recent years, there has been a considerable interest in the application of super plastic forming in the aircraft and automotive industries. This requires a detailed design of the technological process in order to exploit its peculiar potentialities better. Nowadays, the finite element method is used to plan the sheet metal forming processes whose simulation requires determination of material constants for super plastic materials. The present work is aimed to show a simple method to characterize super plastic materials duplex stainless steel which was formed by a constant gaspressure to hemispheres with and without back pressure. The forming operation was performed using an in-house designed and built biaxial forming apparatus. The temporal change of dome heights of hemispheres were measured for applying the pressures. The flow stresses and strain rates developed at the top of the dome during the forming step were shown to follow closely the flow stress - strain rate relationship obtained from the strain rate change tests performed at the same temperature.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.79-87
• /
• 2018

The purpose of this study was to analyze factors influencing insulation performance of inorganic Autoclaved Lightweight Concrete(ALC) sandwich wall panels with the application of shear connectors. To analyze the effect of shear connectors on the thermal performance of sandwich wall panels, heat transfer analysis was conducted by using the three-dimensional heat transfer simulation software. Four types of shear connector such as Pin, Clip, Grid, and Truss were selected for insulation performance analysis. Thermal bridge coefficient was calculated by varying typical panel thickness and shear connector thickness and materials such as steel, aluminum, and stainless steel. The results showed that Grid and Truss type widely distributed along the section of sandwich wall panel had a great influence on the thermal bridge coefficient by changing the influence factors. Based on the results of thermal and structural performance analysis, effective heat transmission coefficient of the sandwich wall panel satisfying the passive house insulation criteria was calculated. As a result, it was found that heat transmission coefficient was increased from $0.132W/m^2{\cdot}K$ to $0.141{\sim}0.306W/m^2{\cdot}K$ depending on the shear connector types and materials. In the majority of cases, the passive house insulation criteria was not satisfied after using shear connectors. The results of this study were likely to vary according to how influence factors were set, but it is important to apply the methods that reduce the thermal bridge when there would be a possibility of greatly affecting the insulation performance.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.129-138
• /
• 2009

최근, 경제적 이점을 살리는 동시에 환경 부하를 줄이기 위하여 많은 기술자들이 리모델링을 선택하고 있다. 세대 통합을 하여 면적을 확대시키는 경우 세대간벽에 대한 개구부의 발생이 필연적인데 이에 따라 벽체의 유효 면적을 상실함으로써 벽체의 강도와 강성이 떨어지게 되며 최종적으로 전체 구조물의 성능을 감소시키는 결과를 낳게된다. 그러므로 이 손상에 대해서는 별도의 보강이 필요하다. 이 연구에서는 손상을 입은 벽체의 성능을 파악함과 동시에 보강 성능의 파악을 위해 네 개의 실험체를 계획하였다. 이 벽체들은 인위적인 손상을 입은 것으로, 프리스트레싱과 강판의 부착에 의해 보강되어 있다. 실험 결과 보강된 실험체들은 전단과 휨에 대해 강도와 강성 모두 향상된 성능을 보여 주었다. 특히 강판 보강의 경우 최대 하중 이후의 연성적 거동을 보여주었고 프리스트레싱 벽체는 강성의 큰 증가를 보여주었다.

• 한국가구학회지
• /
• 제24권1호
• /
• pp.51-59
• /
• 2013

In this study, a dwelling type of Korea and Japan was compared, and consumption rate of domestic timber and its usage was also investigated. In Korea, dwelling type of apartment which constructed by iron and steel-concrete is main shared, but a detached house which is shared at 60% of dwelling type of Japan is mainly constructed by timber. And the rate of the consumption of domestic wood in Japan is 73%. In Japan, there is an effort to substitute imported wood to domestic timber through the promotion of using of domestic timber. Whereas the needs on using of domestic timber gradually emerged. So, the legal about sustainable use of wood is approved by the National Assembly on May 2012. There is not active movement in the aspect of using of domestic timber yet. These causes to the geographical and environmental characteristics, but industry, policy, and the difference of recognize on domestic timber utilization is thought to do greater influence. Hence, it is recommended to make a portfolio of both balanced domestic timber usage and the change of awareness of people by referring to the example of Japan.

• 한국가구학회지
• /
• 제29권1호
• /
• pp.40-48
• /
• 2018

This study analyzes the contribution of hanok that construction in reducing greenhouse gas (GHG) emissions in Korea by calculating the carbon storage of hanoks and comparing it to different housing types in Korea. The hanok is a traditional Korean house. And it were first designed and built in the $14^{th}$ century during thd Joseon Dynasty. According to our results, the number of hanoks in 2016 was approximately 547,085 which was accounting for 7.8% of the total construction market, This study found Gyeongbuk with 95,083, Jeonnam with 88,981, Gyeongnam with 76,388 and Seoul with 43,519 hanoks. According to the GHG Inventory Report for 2016, Korea's total annual GHG emissions amounted to 650 million $tCO_2$, with the carbon stocks in hanoks amounting to 19.2 million $tCO_2$. This accounts for 2.8% of Korea's total GHG emissions and 46.1% of the carbon absorbed by forests. Our results show that hanoks store four times more carbon than light-frame-wood-houses, and 15 times more carbon than concrete-reinforced and steel-frame houses. The main factors causing the hanok industry slowdown are the high construction costs, lack of government support, and insufficient knowledge of hanok architecture. Therefore, to further increase the carbon stock of hanok, more research is needed to improve the technical use of wood and reduce construction of the hanok and prepare legal and institutional arrangements related to hanok industry.

• 자원리싸이클링
• /
• 제18권3호
• /
• pp.3-10
• /
• 2009

무기성 산업폐기물을 이용한 $CO_2$ 고형화 연구는 폐콘크리트 시멘트 미분말 등 무기성 산업폐부산물의 성분 중의 CaO 또는 MgO 성분과 지구온난화의 주범인 $CO_2$와 반응시켜 탄소를 안정적으로 고형화시켜 대기 중의 $CO_2$의 발생을 저감시키는 연구이다. 본 고에서는 산업 현장 및 도시에서 발생되는 $CO_2$의 대기 방출을 저감시킴과 동시에 산업폐부산물의 유효 자원화를 위한 $CO_2$ 고형화 연구의 국내외 기술 동향을 파악하고, 이를 통해 한국형 $CO_2$ 저감 및 활용 기술을 제시하고자 한다.