• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.34-43
• /
• 2012

The behaviors of the curved bridges which has been constructed in the RAMP or Interchange are very complicate and different than orthogonal bridges according to the variations of radius of curvature, skew angle and spacing of shoes. Occasionally, the camber of girder and negative reactions can be occurred due to bending and torsional moment. In this study, the effects on the negative reaction in the curved bridge were investigated on the basis of design variables such as radius of curvature, skew angle, and spacing of shoes. For this study, the twin-steel box girder curved bridge with single span which is applicable for the RAMP bridges with span length(L) of 50.0m and width of 9.0m was chosen and the structural analysis to calculate the reactions was conducted using 3-dimensional equivalent grillage system. The value of negative reaction in curved bridges depends on the plan structures of bridges, the formations of structural systems, and the boundary conditions of bearing, so, radius of curvature, skew angle, and spacing of shoes among of design variables were chosen as the parameter and the load combination according to the design standard were considered. According to the results of numerical analysis, the negative reaction in curved bridge increased with an decrease of radius of curvature, skew angle, and spacing of shoes, respectively. Also, in case of skew angle of $60^{\circ}$ the negative reaction has been always occurred without regard to ${\theta}/B$, and in case of skew angle of $75^{\circ}$ the negative reaction hasn't been occurred in ${\theta}/B$ below 0.27 with the radius of curvature of 180m and in ${\theta}/B$ below 0.32 with the radius of curvature of 250m, and in case of skew angle of $90^{\circ}$ the negative reaction hasn't been occurred in the radius of curvature over 180m and in ${\theta}/B$ below 0.38 with the radius of curvature of 130m, The results from this study indicated that occurrence of negative reaction was related to design variables such as radius of curvature, skew angle, and spacing of shoes, and the problems with the stability including negative reaction will be expected to be solved as taken into consideration of the proper combinations of design variables in design of curved bridge.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.263-269
• /
• 2003

This paper describes the vibration control using a tuned mass damper(TMD) for the existing footbridge. The footbridge connecting driveway to the Stadium is the simple steel box-girder bridge with the main span length of 44.6m. This footbridge has light weight(=25.3kN/m) and pedestrians walking on the footbridge were found to induce resonance at the fundamental mode of the structure, resulting in unacceptable accelerations in it. Taking into account economical and constructional benefits, TMD was designed to damp the vibrations of the modes next to the natural frequency caused by a pedestrian, with a limitation criteria of vertical amplitude. A set of two 500kgf vertical TMDs was manufactured by KR and installed into the railings next to the central section of this footbridge. The installation of TMDs reduced the peak acceleration in the meeting box to less than 90%. It is hoped that the study will present bridge engineers with a measure of retrofitting footbridges to make them more friendly to users.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.520-526
• /
• 2019

I-type girders are widely applied as very economical sections in plate girder bridges. There has been research on developing composite laminated panels, curved plates reinforced with closed-end ribs, and new forms of ribs and compression flanges for steel box girders. However, there is a limitation in analyzing the exact cause of local buckling caused by an I-type girder's webs. Therefore, an I-type girder's web was modeled using the finite element analysis program LUSAS 17.0 before and after reinforcement. We checked for the minimum thickness criteria presented in the Korea highway bridge design code, and the cause of buckling after performing a linear elastic buckling analysis of dead and live loads was analyzed. Before reinforcement, an eigenvalue (λ₁) at the 1st mode was 0.7025, the critical buckling load was smaller than the applied load, and there is a buckling. After reinforcement, when applying vertical and horizontal stiffeners to the web part of the girder at support, a Nodal line was formed, the eigenvalue was 1.5272, and buckling stability was secured. To improve buckling trace of the girder at the support, an additional plate was applied to the web at the support to ensure visual and structural safety, but buckling occurs at center of web. The eigenvalue (λ₁) was 3.5299, and this method is efficient for reinforcing the web of the support.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.326-331
• /
• 2009

An algorithm is proposed for computing dynamic displacements of a bridge using FBG sensors. An existing algorithm for estimating dynamic displacements of a simply supported beam through mode superposition is extended and applied to various types of bridges with bending and torsional modes. The proposed algorithm is examined through field tests on a suspension span steel deck plate box girder bridge. Guidelines are provided for determining the number of modes and the number of strain gages to be used.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.41.1-41.1
• /
• 2010

복부 파형강판 PSC 박스거더는 상부와 하부에 콘크리트 슬래브를 갖고 있으며, 복부에만 강판이 사용되는 특수한 형태의 교량이다. 해당 형식의 비틀림 거동을 이해하기 위해서는 상, 하부 콘크리트의 비틀림 거동에 대해 먼저 분석한 후, 비틀림에 의한 전단변형률이 거더 단면의 모든 구간에서 동일하다는 적합조건을 이용하여 복부의 비틀림 거동을 이해해야 한다. 기존의 복부 파형강판을 갖는 PSC 박스거더에 대한 연구는 전단거동(Easley, 1969; Elgaaly et al., 1996; 문지호 외, 2004; 이종원 외, 2005) 및 휨 거동(Elgaaly et al., 1997; Abbas et al., 2006, 2007; 문지호 외 2008)에 대하여 수행되어 왔으며, 이러한 연구들은 파형강판 자체에 국한되는 경향이 있다. 특히나 전체 복합거더의 비틀림 거동에 대한 연구는 크게 부족한 상황이며, 기존의 연구(Mo et al., 2000)는 균열 발생 이후의 비틀림 거동에 대해서만 수행되었고, 슬래브가 갖는 인장 강도를 무시하였다. 본 연구에서는 콘크리트의 비틀림 발생 이전과 이후를 모두 예측할 수 있는 방법을 제안하였고, 이를 토대로 시행오차법이 적용된 해석 알고리즘을 제작하였으며, 유한요소해석을 통하여 검증하였다.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.751-767
• /
• 2015

A new procedure is proposed for assessing probabilistic condition of structures considering effect of measured data uncertainty. In this procedure, multiple Finite Element (FE) models are identified by using weighting vectors that represent the uncertainty conditions of measured data. The distribution of structural parameters is analysed using a Principal Component Analysis (PCA) in relation to uncertainty conditions, and the identified models are classified into groups according to their similarity by using a K-means method. The condition of a structure is then assessed probabilistically using FE models in the classified groups, each of which represents specific uncertainty condition of measured data. Yeondae bridge, a steel-box girder expressway bridge in Korea, is used as an illustrative example. Probabilistic condition of the bridge is evaluated by the distribution of load rating factors obtained using multiple FE models. The numerical example shows that the proposed method can quantify uncertainty of measured data and subsequently evaluate efficiently the probabilistic condition of bridges.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.544-551
• /
• 2017

Metaheuristic algorithms are efficient techniques for a class of mathematical optimization problems without having to deeply adapt to the inherent nature of each problem. They are very useful for structural design optimization in which the cost of gradient computation can be very expensive. Among them, the characteristics of simulated annealing and genetic algorithms are briefly discussed. In Metropolis genetic algorithm, favorable features of Metropolis criterion in simulated annealing are incorporated in the reproduction operations of simple genetic algorithm. Numerical examples of structural design optimization are presented. The example structures are truss, breakwater and steel box girder bridge. From the theoretical evaluation and numerical experience, performance and applicability of metaheuristic algorithms for structural design optimization are discussed.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.721-726
• /
• 2002

The topic on today is dynamic response analysis of curved bridge-AGT(Automated Guide-way Transit) vehicle interaction system. Rubber wheel type AGT vehicle is adopted in this study, and the vehicle is idealized as three dimensional eleven DOF model. Three types of composited steel box girder bridges are modelized with F.E. method. And three types of artificially generated surface roughnesses are adopted for analysis. The dynamic equations of curved bridge, AGT vehicle and surface roughness are derived by using Lagrange's equation of motion. And the equations are solved by Newmark-${\beta}$ method. As a result, The dynamic increasement factor is inverse proportional to radius curvature.

• Wind and Structures
• /
• v.1 no.1
• /
• pp.67-75
• /
• 1998

Tiger Gate Bridge, a steel suspension bridge with a main span of 888 m and a stiffening box girder, is located at the Pearl River Estuary, Guangdong Province, one of the typhoon-prone area in China. Focusing on the developing of the full aeroelastic model of the bridge and simulation of the wind field of the bridge site in a large boundary wind tunnel at Tongji University, Shanghai, China, some main results about the wind resistant properties of the bridge including aerodynamic instability, buffeting responses both being in operation and erection stages by using of a full aeroelastic model wind tunnel testing are introduced. Some of analytical approaches to those aerodynamic behaviours are also presented, and compared with experimental data of the testing.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.17-23
• /
• 1998

The objective of this study is to investigate the dynamic behaviors of KHSR(Korea High-Speed Railway) bridge supported by elastomeric bearings subjected to high-speed vehicles. The effects of damping on the dynamic behaviors are also studied. The train composed of two power cars, two motor cars and eighteen passenger cars are simulated using constant moving forces for simplicity and effectiveness in the analysis. Direct integration method are used to solve the dynamic equation of motion. The bridge analyzed is real bridge with 2@40m span and concrete continuos box girder. The bridge is model led using frame element in three dimensional space. From the results of this study, the effects of elastomeric bearing on the dynamic responses of bridge(especially vertical accelerations) may cause undesirable behaviors. Damping are very important in the dynamic behaviors of the bridge subjected to high-speed railways. And so, dynamic analysis of steel bridge for high-speed railway supported by elastomeric bearings should be performed carefully.