• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1178-1184
• /
• 2008

In this study, techniques of ion implantation were used in order to improve the characteristics of metal materials such as the oxidation and wear resistant. In particular it is necessary to develope their oxidation and wear resistant that could be used in severe environmental conditions. There are mainly two elementary technologies including ion implantation and/or thin film coating. Ion implantation method was performed for surface modification. As a result, it was found that some ion implantations methods such as Nb, high-temperature Nb ion implantation and Nb+C combined implantation are somewhat effective for improving the oxidation resistance of TiAl alloy. Furthermore, the fluorine PBII treatment is more effective for improving the oxidation resistance of the TiAl alloy with three-dimensional shapes. The implantation of boron ion into thin film of TiN was also effective for improving the properties of materials like high temperature wear resistance. TiCrN film was applied to the actual seal ring for steam turbines, and it was observed that its sliding property showed a successfully good performance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권9호
• /
• pp.1305-1313
• /
• 2006

Five male dairy goats (Saanen), 4.6 month old with a body weight of 21.4 ($SD{\pm}1.6$) kg, were used to examine 5 dietary urea treatments in a $5{\times}5$ Latin Square experimental design. The five levels of urea were 10, 20, 30, 40 and 50 g urea/kg DM of steam-treated oil palm fronds (OPF) and dry matter intake tended (p>0.05) to increase with increasing urea supplementation up to 30 g/kg OPF (77.7 g/kg $BW^{0.75}$), but decreased (p<0.05) with 40 and 50 g urea/kg OPF (67.4 and 63.7 g/kg BW0.75, respectively) supplementation. Similarly, dry matter, organic matter, crude protein, neutral detergent fiber and hemicellulose digestibilities increased (p<0.05) with the addition of urea to 30 g/kg OPF but thereafter decreased (p<0.05) with 40 and 50 g/kg OPF. Ruminal pH, ruminal $NH_3$-N concentration and plasma urea concentration increased linearly (p<0.01) and quadratically (p<0.01) as a consequence of addition of urea to the diet. Excretion of total purine derivatives (PD) by goats fed 30 g of urea/kg OPF was highest (p<0.05) followed by goats fed 20, 40, 10 and 50 g of urea/kg OPF. Microbial N (g N/day) and efficiency of microbial N supply expressed as g N/kg organic matter apparently digested in the rumen were higher (p<0.05) in goats fed 30 g of urea/kg OPF (5.5 g N/day and 22.0 g N/kg DOMR, respectively) than in goats on 10 and 50 g of urea/kg OPF treatments. However, the former did not differ from goats fed 20 g of urea/kg OPF (3.9 g N/day and 16.6 g N/kg DMOR, respectively). Ruminal VFA concentration, protein/energy ratio, N absorption and N retention increased (p<0.05) with the addition of urea to the diet up to 30 g/kg OPF but decreased (p<0.05) with 40 and 50 g/kg OPF. This implies that the optimal level of urea supplementation in an OPF based diet was about 30 g urea/kg OPF.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권3호
• /
• pp.395-399
• /
• 1999

Three experiments were conducted to determine the effects of conditioning a complex (20% whey, 10% lactose, 4% plasma protein, 4% wheat gluten and 2% blood meal) diet on growth performance of weanling pigs. In Exp. 1,180 pigs (average initial BW of 6.4 kg) were fed the experimental diet (1.7% lysine) during a 7-d growth assay. Treatments were a meal control (M), standard (ST), and expander (EX) conditioned mash or pellets. Rate and efficiency of gain were decreased by 39% and 21% (p<0.005) respectively, for pigs fed EX diets compared to those fed the ST diet. In Exp. 2,196 pigs (average initial BW of 6.5 kg) were used to determine the effects of EX operating conditions on nutritional value of a pelleted complex diet. When steam conditioning temperature (prior to expanding) was $54^{\circ}C$, increasing cone pressure of the EX from 0 to 7 to 14 kg/cm2 resulted in linear decreases in rate of gain of weaned pigs (p<0.006), suggesting heat damage of the diet. Increasing conditioning temperature (i.e., adding steam) of the diets from 46 to 54 to $63^{\circ}C$ (cone pressure at $12kg/cm^2$) resulted in improved rate of gain (p<0.04) of the pigs. However, none of the pigs fed expanded diets compared favorably to the pigs fed the conditioned $(54^{\circ}C)$ pellets processed with no cone pressure. In Exp. 3,168 pigs (average initial BW of 6.6 kg) were used to determine the effects of expanding the various components of the diet. Treatments were M and ST pellets as controls, EX-corn, EX-corn soybean-meal, EX corn-soybean meal-oil, and EX-complete diet. Efficiency of gain was increased by 13% with EX portions of the diet compared to the mash control, but there was a marked decrease in performance when the complete diet was expanded (p<0.001). Expanded corn-soybean meal-oil supported the greatest ADG with a 19% increase compared to the average of the EX corn and EX corn-soybean meal treatments (p<0.005). In conclusion, our results suggest no benefit from expanding complete phase-I diets.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권11호
• /
• pp.1623-1631
• /
• 2006

The objective of this study was to evaluate the effect of protein and energy on goats fed oil palm fronds (OPF) as roughages. Twenty-four male Saanen goats aged between 7 and 8 months and weighing $23.4{\pm}1.6kg$ were used in a $2{\times}3$ factorial design. Factors were three levels of urea (3%, 4% or 5%) and two levels of energy (low energy (LE) or high energy (HE)). On average, all parameters measured, including dry matter intake (DMI), nutrient digestibility, digestible nutrient intakes, ruminal ammonia-N ($NH_3$-N), ruminal total volatile fatty acid (total VFA) and individual VFA concentrations (mM/L), microbial N supply, P/E ratio and N retention were higher for HE compared to LE diets. Significant (p<0.05) interactions were found between levels of urea and energy for nonstructural carbohydrate (NSC) and energy (DE) digestibilities, ruminal $NH_3$-N and total VFA concentrations. HE diets had higher N absorption and retention than LE diets. Interactions between urea and energy for plasma urea nitrogen (PUN), heat production (HP), and urine and faeces N excretion were significantly lower (p<0.05) for the HE diets than those recorded for the LE diets. The results indicated that supplementation of energy enhanced utilization of urea and resulted in higher animal performance as a consequence of improved ruminal fermentation, microbial yield and N balance. However, the optimal level of urea supplementation remained at 3% in the HE diet.

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.39-44
• /
• 2005

고연료 중 대부분이 수소와 탄소의 결합물이다. 연료들은 엔진 내부에서 완전 연소되었을 경우는 수분인 증기와 $CO_2$가 발생된다. 그러나 대개 불완전 연소가 일어나 $NO_x$나 Smoke가 발생되어진다. 그리고 이 물질은 인해에 매우 해로운 물질들이다. 본 논문에서는 EGR과 상용주파수를 이용한 플라즈마 장치를 조합하여 배기가스 유해물질 제거 특성을 연구하였다. $NO_x$의 경우에는 전압과 EGR율이 증가할수록 유해물질 제거 특성이 우수하였고, Smoke의 경우에는 EGR 율이 증가하게 되면 Smoke의 발생율이 증가하였으나 전압이 증가하게 되면 발생율이 감소하였다.

• Corrosion Science and Technology
• /
• 제3권3호
• /
• pp.112-117
• /
• 2004

This work investigated the material properties of Ni-P-B alloy electrodeposits obtained from a Ni sulfamate bath as a function of the contents of the P and B sources($H_3PO_3$ and dimethyl amine borane complex(DMAB), respectively) with/without additives. Chemical composition, residual stress, microstructure and micro hardness were investigated using ICP(inductively coupled plasma) mass spectrometer, flexible strip, XRD, TEM and micro Vickers hardness tester, respectively. From the results of the compositional analysis, it was observed that P and B are incorporated competitively during the electrodeposition and the sulfur from the additive is codeposited into the electrodeposit. The measured residual stress value increased in the order of Ni, Ni-P, Ni-B and Ni-P-B electrodeposits indicating that boron affects the residual tensile stress greater than phosphorus. As the contents of the alloying element sources of P and B increased, crystallinity and the grain size of the electrodeposit decreased. The effect of boron on crystallinity and grain size was also relatively larger than the phosphorus. It can be explained that the boron with a smaller atomic radius contributes to the increase of residual stress in the tensile direction and the larger restraining force against the grain growth more significantly than the phosphorus with a larger atomic radius. Introduction of an additive into the bath retarded crystallization and grain growth, which may be attributed to the change of the grain growth kinetics induced by the additive adsorbed on the substrate and electrodeposit surfaces during electrodeposition.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.617-627
• /
• 2006

Statement of problem: HA has been used as a coating material on Ti implants to improve osteoconductivity. However. it is difficult to form uniform HA coatings on implants with complex surface geometries using a plasma spraying technique. Purpose : To determine if Ti6Al4V sintered porous-surfaced implants coated with HA sol-gel coated and hydrothermal treated would accelerate osseointegration. Materials and Methods : Porous implants which were made by electric discharge were used in this study. Implants were anodized and hydrothermal treatment or HA sol-gel coating was performed. Hydrothermal treatment was conducted by high pressure steam at $300^{\circ}C$ for 2 hours using a autoclave. To make a HA sol, triethyl phosphite and calcium nitrate were diluted and dissolved in anhydrous ethanol and mixed. Then anodized implant were spin-coated with the prepared HA sols and heat treated. Samples were soaked in the Hanks solution with pH 7.4 at $37^{\circ}C$ for 6 weeks. The microstructure of the specimens was observed with a scanning electron microscope (SEM), and the composition of the surface layer was analyzed with an energy dispersive spectroscope (EDS). Results : The scanning electron micrographs of HA sol-gel coated and hydrothermal treated surface did not show any significant change in the size or shape of the pores. After immersion in Hanks' solution the precipitated HA crystals covered macro- and micro-pores The precipitated Ca and P increased in Hanks' solution that surface treatment caused increased activity. Conclusion : This study shows that sol-gel coated HA and hydrothermal treatment significantly enhance the rate of HA formation due to the altered surface chemistry.

• 대한환경공학회지
• /
• 제28권1호
• /
• pp.48-53
• /
• 2006

본 논문에서는 plasmatron을 사용하여 프로판의 개질에 의해 SynGas 생산의 최적의 조건을 연구하였다. 플라즈마는 공기와 아크 방전에 의해 생성되며 합성 가스의 상관 관계뿐만 아니라 수증기, $CO_2$ 또는 반응기에 촉매를 추가하여 프로판 전환에 미치는 영향과 수소의 수율, $H_2/CO$ 비에 대해 연구하였다. $O_2/C_3H_8$ 유량비, $H_2O/C_3H_8$ 유량비와 $CO_2/C_3H_8$ 유량비를 각각 $0.94{\sim}1.48,\;4.3{\sim}10$과 $0.8{\sim}3.05$로 변화하였을 때, $H_2O/C_3H_8$ 유량비의 변화 결과가 최대 $28.2{\sim}31.6%$의 $H_2$ 농도를 나타냈으며, 촉매를 추가하고 $H_2O/C_3H_8$ 유량비의 변화결과 $6.6{\sim}7.1%$의 최소 CO 농도를 나타냈다. 그리고 $H_2/CO$ 비는 $3.89{\sim}4.86$을 나타냈다.

• 한국식생활문화학회지
• /
• 제22권2호
• /
• pp.246-253
• /
• 2007

참나물의 잎과 줄기부위에서 가장 많이 함유하고 있는 무기 성분은 K, P, Ca, Mg 순이었으며 잎 부위가 줄기부위보다 Ca, P, Mg함유량이 약 4배 정도 많았다 전자코를 이용한 휘발성 향기성분 패턴은 신선한 참나물의 경우 제1주성분 값이 +값을, 음건한 건조 참나물은 - 값을 나타내어서 신선한 참나물과 건조한 참나물 사이에는 뚜렷한 차이를 보였고 건조방법에 따른 시료간의 구별이 가능하였다. SDE법에 의해 신선한 참나물은 aldehydes 3종, alcohols 9종, ester 4종, hydrocarbons 5종, terpen hydrocarbons 34종, ketone 1종, 기타 2종의 총 58 종이 확인되었고, 음건한 참나물은 aldehydes 4종, alcohols 7종, hydrocarbon 1종, terpen hydrocarbons 17종, ketone 1종, 기타 1종의 총 31종이 확인되었다. SDE법에 의한 신선, 음건한 참나물 모두 ${\alpha}$-selinene(37.89%, 12.59%)가 가장 많이 확인되었는데 신선할 때보다 음건한 경우 휘발성향기성분의 peak수와 peak area%가 적었다. CAR/PDMS fiber HS-SPME법에 의해 34종이 확인되었는데 aldehydes 2종, alcohols 2종, hydrocarbons 7종, terpen hydrocarbons 23종이며 myrcene(15.50%)가 가장 많이 확인되었다. PDMS fiber HS-SPME법에 의해 aldehydes 1종, alcohols 1종, hydrocarbons 2종, terpen hydrocarbons 17종으로 총 21종이 확인되었고 germacrene D(16.84%)가 가장 많았다. SDE법에 의한 경우가 SPME법보다 향기성분의 종류와 양이 많았고 HS-SPME법의 경우 CAR/PDMS fiber가 PDMS fiber 보다 더 많은 종류의 향기가 확인되었다.