• 제목/요약/키워드: Steam iron

검색결과 52건 처리시간 0.026초

Pilot 규모 산성가스 제거공정 운전 특성 (Operation Characteristics of Pilot-scale Acid Gas Removal Process)

  • 이승종;류상오;정석우;윤용승
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 추계학술대회 논문집
    • /
    • pp.533-536
    • /
    • 2009
  • The gasification technology is a very flexible and versatile technology to produce a wide variety products such as electricity, steam, hydrogen, Fisher-Tropsch(FT) diesels, Dimethyl Ether(DME), methanol and SNG(Synthetic Natural Gas) with near-zero pollutant emissions. Gasification converts coal and other low-grade feedstocks such as biomass, wastes, residual oil, petroleum coke, etc. to a very clean and usable syngas. Syngas is produced from gasifier including CO, $H_2$, $CO_2$, $N_2$, particulates and smaller quantities of $CH_4$, $NH_3$, $H_2S$, COS and etc. After removing pollutants, syngas can be variously used in energy and environment fields. The pilot-scale coal gasification system has been operated since 1994 at Ajou University in Suwon, Korea. The pilot-scale gasification facility consists of the coal gasifier, the hot gas filtering system, and the acid gas removal (AGR) system. The acid gas such as $H_2S$ and COS is removed in the AGR system before generating electricity by gas engine and producing chemicals like Di-methyl Ether(DME) in the catalytic reactor. The designed operation temperature and pressure of the $H_2S$ removal system are below $50^{\circ}C$ and 8 kg/$cm^2$. The iron chelate solution is used as an absorbent. $H_2S$ is removed below 0.1 ppm in the H2S removal system.

  • PDF

저 Sn 함유 Zr-Nb-Sn-Fe 합금 튜브 제조 및 최종 열처리 온도에 따른 기계적/부식특성 변화 (Processing of Low Tin Zr-1Nb-0.69Sn-0.11Fe Alloy Tubes and Effect of Final Heat Treatment on Their Mechanical and Corrosion Properties)

  • 조남찬;이종민;홍순익
    • 대한금속재료학회지
    • /
    • 제49권1호
    • /
    • pp.17-24
    • /
    • 2011
  • To investigate the relationship between heat treatment in zirconium alloy tubing process and metallurgical characteristics of Zr-1Nb-0.69Sn-0.11Fe alloy tubes, mechanical and oxidation behaviors of tubes heat treated at different temperatures after the final pilgering were investigated. The stress strain curves exhibited the saturation behaviors in all heat treatment conditions ($460{\sim}600^{\circ}C$) in this study with the onset strain of saturation increased with increase of post-pilgering annealing temperature. The strength fell off rapidly with increasing annealing temperature. The ultimate strength of the low tin Zr-1Nb-0.69Sn-0.11Fe alloy with slightly higher iron and oxygen contents in this study was found to be higher than Zr-1Nb-1Sn-0.1Fe alloy. The oxidation experiments in steam condition revealed that the corrosion resistance of low tin Zr-1Nb-0.69Sn-0.11Fe alloy was better than the Zr-1Nb-1Sn-0.1Fe alloy with a higher Sn content. The weight gain of low tin Zr-1Nb-0.69Sn-0.11Fe alloy tubes gradually increased with the increasing annealing temperature possibly due to the decreased Nb content in the matrix because of the formation of ${\beta}-Nb$ particles.

바지 형태에 구애받지 않는 융합 다림질 시스템 개발 (A Development of an All-in-one Ironing System for All Style Pants)

  • 김근식;김종훈
    • 융합정보논문지
    • /
    • 제12권1호
    • /
    • pp.172-179
    • /
    • 2022
  • 세탁 공정에서 다림질 공정은 세탁 등 다른 공정과는 달리 표준화된 공정처리가 난해하여 수작업에 의존한다. 이는 상의와는 달리 바지는 허리부분에 맵시 주름은 물론 허리 아래에 주름선이 있어서 두 부분으로 분리하여 다려야하기 때문에 2대의 독립된 다림 장비가 개발되어 사용되고 있다. 그러나 이러한 방법은 공정 간의 수동이동으로 작업자의 투입, 공간적 손실, 바지 구겨짐 등의 문제가 발생하여 두 장비를 융합한 바지다림 장치가 요구되고 있다. 본 논문에서 기술하는 일체형 바지다림 시스템은 바지 길이와 모양, 상단부 주름에 무관하게 바지 상단부와 측면부를 자동으로 순차 다림질하며, 또한 다림질 진행 상황을 사용자 모니터에 표시하면서 자가 진단 기능을 수행한다. 본 연구의 결과로 기존의 독립장비 2대를 사용하는 경우보다 다림질 수량을 증가시켜 2배의 성능 향상과 20% 이상의 소비전력을 절감하였다.

바이오가스 이용 기술지침 마련을 위한 연구(III) - 기술지침(안) 중심으로 (A Study on Establishment of Technical Guideline of the Installation and Operation for the Biogas Utilization of Power generation and Stream - Design and Operation Guideline)

  • 문희성;배지수;박호연;전태완;이영기;이동진
    • 유기물자원화
    • /
    • 제26권2호
    • /
    • pp.95-103
    • /
    • 2018
  • 바이오가스 이용 최적화를 위해 탈황 및 제습 전처리시설 가이드라인으로 $H_2S$ 농도는 철염으로 처리가능한 150 ppm으로 설정하고, 제습은 발전기 운전 적정수분 값이며 EU회원국에서 바이오가스 활용 시 적용하는 상대습도 60 %로 설정하였다. 국내 바이오가스 평균 온도인 $31^{\circ}C$에서 상대습도 60 %으로 적용한다면 노점온도 $22^{\circ}C$, 절대습도 $20.57g/m^3$으로 나타낼 수 있으며, 전처리 설비가 적절히 가동된다면 가이드라인에 만족하여 바이오가스의 이용이 최적화 될 것으로 사료된다. 바이오가스 이용 최적화를 위해 발전기 설비 가이드라인을 설정하고자 하였다. 바이오가스 적정 이용량으로는 전체 가스 발생량의 90 % 이상을 이용해야하며, 발전기 시설의 용량은 여유율을 10~30 %로 설정해야 한다. 발전기에 유입가스의 압력을 균등화하기 위해서는 가스 균등조(buffer tank)를 설치하며, 발전실 평균온도는 $45^{\circ}C$이하로 유지한다. 소화조에서 일정한 메탄농도로 가스가 생성되지 않아 효율이 저하되므로 메탄농도에 변화에 따른 공기연료비 제어시스템을 설치가 요구된다. 본 연구에서는 유기성폐자원의 바이오가스 생산 및 이용을 최적화를 위해 현장시설의 정밀모니터링과 시설별 에너지수지를 분석하고, 현장문제 해결방안에 대해서 조사하여 전처리시설 및 발전기 등의 설계 및 운전 가이드라인을 제시하고자 한다.

환경산업연관표 2005를 이용한 산업부문의 이산화탄소(CO2) 배출 분석 (CO2 Emission Structure Analysis of Industrial Sector with Environmental Input-Output Table 2005)

  • 김윤경
    • 자원ㆍ환경경제연구
    • /
    • 제20권1호
    • /
    • pp.1-31
    • /
    • 2011
  • 본 논문에서는 우리나라의 2005년 환경산업연관표(76개의 내생부문, 21개의 에너지원)를 작성하고, 중간수요부문과 최종수요부문을 대상으로 중간투입액기준의 $CO_2$ 원단위, 열량기준의 $CO_2$ 원단위, 유발 $CO_2$ 발생량을 추정하고, 경제주체간 및 산업간의 상품생산과 흐름에 수반되는 에너지소비와 $CO_2$의 흐름을 분석하였다. $CO_2$ 원단위의 비교에 따르면 최종수요부문이 더 높은 열량을 갖는 에너지원을 사용하며, 중간수요부문이 환경친화 정도가 상대적으로 낮은 에너지원을 사용하여 동일 열량에 대해서 $CO_2$를 더 배출시키고 있다. 유발 $CO_2$ 발생량이 높은 산업은 화력발전($32.587CO_2-g$/원), 시멘트($10.370CO_2-g$/원), 도로운송($7.255CO_2-g$/원), 코크스 및 기타석탄제품($5.791CO_2-g$/원), 증기 온수공급업 수도($4.575CO_2-g$/원)이다. 높은 $CO_2$ 원단위의 산업들의 $CO_2$ 원단위를 저감시키는 것은 해당산업의 환경친화성을 높이는 것과 함께, 경제 전체의 환경친화성을 높인다. 더하여 선철 및 조강처럼 낮은 $CO_2$ 원단위를 갖지만 높은 영향력계수와 감응도계수를 갖는 산업의 $CO_2$ 원단위도 낮추어야 한다. 이 산업들은 다른 산업에게, 그리고 다른 산업으로부터 상대적으로 큰 영향을 받기 때문에 $CO_2$ 원단위가 낮더라도 환경친화성을 갖추어야 유발 $CO_2$ 발생량을 낮출 수 있다.

  • PDF

요양시설 거주 노인의 에너지와 영양소 섭취 실태 및 식품선호도 조사 (Study on Energy and Nutrient Intake and Food Preference of the Elderly in Care Facilities)

  • 권종숙;이승희;이강민;이윤나
    • 대한지역사회영양학회지
    • /
    • 제21권2호
    • /
    • pp.200-217
    • /
    • 2016
  • Objectives: The purpose of this study was to assess energy and nutritional intake and investigate the preference for food and cooking methods of the residents in elderly care facilities. Methods: Data were collected from 72 residents (10 males and 62 females) aged ${\geq}70$ years in elderly care facilities using questionnaires, food photographs for estimating dietary intake and records for daily physical activity. Results: Average age of the study participants was 85.0 years and 41, 36 and 8 had dementia, hypertension and diabetes mellitus, respectively. 15%, 65% and 19% of subjects were physically mobile, enervated, and immobile, respectively. Daily energy intake was 1360.2 kcal in men and 1378.0 kcal in women, which were 68.0% and 86.1% of the estimated energy requirement (EER) of dietary reference intake for Koreans (KDRI) for ${\geq}75$ year old individuals, respectively. Estimated energy expenditure (EEE) of subjects calculated using formula from KDRI was 1361.9 kcal and EER calculated using estimated daily physical activity (EDPA) was 1232.9 kcal. Energy intake and EEE from KDRI were higher than EER from EDPA. Dietary intake of dietary fiber, calcium, potassium, zinc, vitamin $B_2$, niacin, vitamin C were lower, and protein, phosphorous, iron, sodium, vitamin A, vitamin $B_1$, vitamin $B_6$, vitamin E were higher than the corresponding ones of KDRI. Subjects liked meats, fishes and shellfish, and fruits, while subjects disliked milk, seaweeds and salted fish and salted vegetables. Cooked rice, soybean paste soup, beef, cooked sliced radish strip, and yogurt were favorite foods, with steam being a favorite cooking method. Subjects considered nutrition as the most important factor for improving food service quality. Conclusions: Results of this study could be utilized for improving food-service for the residents in elderly care facilities, and provide a basis for setting reference intake of energy and nutrients of the elderly having very low activity levels.

발전 설비용 CrMo강의 탄화물 구조와 조성 변화에 미치는 열화 및 크리프 손상의 영향 (The Effects of Thermal Degradation and Creep Damage on the Microstructure and Composition of the Carbides in the CrMo Steels for Power Plant)

  • 주연준;홍경태;이현웅;신동혁;김제원
    • 한국재료학회지
    • /
    • 제9권10호
    • /
    • pp.1018-1024
    • /
    • 1999
  • Sn-3.5Ag 무연합금을 Cu 및 Alloy42 리드프레임에 납땜접합 (solder joint)하고 미세조직, 젖음성, 전단강도, 시효효과를 측정하여 비교하였다. Cu의 경우, 땜납의 Sn기지상안에 Ag(sub)3Sn과 Cu(sub)6Sn(sub)5상이, 그리고 땜납/리드프레임의 경계면에서는 1∼2㎛ 두께의 Cu(sub)6Sn(sub)5상이 형성되었다. Alloy42의 경우, 기지상내에 있는 낮은 밀도의 Ag(sub)3Sn상만이, 그리고 계면에는 0.5∼1.5㎛ 두께의 FeSn(sub)2이 형성되었다. 한편, Cu에 비해 Alloy42 리드프레임에서 퍼짐면적은 크고 접촉각은 작아 더 우수한 젖음성을 나타내었으나, 전단강도는 35%, 연신율은 75%로 낮았다. 180℃에서 1주일간 시효처리 후, Cu 리드프레임에는 계면에 η-Cu(sub)6Sn(sub)5 층외에 ξ-Cu(sub)3Sn층이 성장하였고, Alloy42 리드프레임에는 기지상내에 Ag(sub)3Sn이 구형으로 조대하게 성장하였고, 계면에는 FeSn(sub)2층만이 약 1.5㎛로 성장하였다.

  • PDF

하수오(何首烏)의 품질인증(品質認證) 방안(方案) (Quilitative certificational plan of heshouwu)

  • 신미경;노성수;길기정;서부일;서영배
    • 혜화의학회지
    • /
    • 제13권2호
    • /
    • pp.205-212
    • /
    • 2004
  • Now many sustitution and false articles is used in korea instead of heshouwu. To use heshouwu correctly, we will make a quilitative certificational plan of heshouwu to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source of plant Heshouwu is a root tuber of a perennial herb Polygonum multiflorum Thunberg(Family : Polygonaceae). 2) Harvest After planting 3-5 yaers, harvesting in an autumn, washin clean the mud, a big heshouwu cut off a half or section, dry in sunny place or at a little fire. When harvesting, we harvest only a big thing, a small thing transfer a field, after culturing of 1-2 years, harvest at big roots. Harvesting is done usually in an autumn after 3 years. When collecting a seed, we must harvest a heshouwu the next year. 3) Process We must process heshouwu at the decoction of black beans, heshouwu suck in the decoction of black beans, heat with steam in an iron pot. Black beans is used every 100 kg of heshouwu. 4) Quility (1) Funstional standards It is good that weight is heavy and outer skin is yellow-brown, section surface is light red color, powdery and has a figure such as clouds in section. (2) Physicochemical standards Heshouwu expesses a various chang of components in process of working. We think that it need to add a standard of detection about 2,3,5,4'-tetrahrdroxystilbene-2-O-${\beta}$ -D-glucoside in a current authentic document which is a water-soluble component of heshouwu. It must that Dry on loss is less than 14.0%, content of ash is less than 5.0%, Content of acid-nonsoluble ash is less than 1.5%, Content of extract is more than 17.0%. A fixed quantity of 2,3,5,4'-tetrahrdroxystilbene-2-O-${\beta}$ -D-glucoside is more than 1.0%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agriculural medince.

  • PDF

바이오가스 이용 기술지침 마련을 위한 연구(II) - 정밀모니터링 결과 중심으로 (A Study on Establishment of Technical Guideline of the Installation and Operation for the Biogas Utilization of Power generation and Stream - Results of the Precision Monitoring)

  • 문희성;배지수;박호연;전태완;이영기;이동진
    • 유기물자원화
    • /
    • 제26권1호
    • /
    • pp.65-78
    • /
    • 2018
  • 본 연구는 유기성폐자원(가축분뇨, 음식물류폐기물, 음식물류폐수 등)의 바이오가스 이용에 대한 적정 설계 및 운전 기술지침서 마련하고자 현장조사와 정밀모니터링 등을 실시하였다. 정부의 중장기 바이오가스화 정책에 따라 폐자원의 자원화 시설 확충이 활발히 추진되고 있다. 하지만 생산된 바이오가스를 이용하여 발전 및 스팀으로 활용하는 시설은 효율이 아직은 저조하고 잦은 고장이 발생되고 있다. 전국 11개소 유기성폐자원 바이오가스화 시설을 대상으로 정밀모니터링을 실시하였다. 사계절 평균으로 정밀모니터링 결과를 정리하였을 때, 유기성폐자원 별 효율성 분석에서 유기성분해율은 VS기준 음식물/음폐수는 68.2 %, 가축분뇨는 66.8 %, 하수슬러지의 경우 46.2 %로 전체 평균 58.8 %로 분석되었다. 전처리 전후 바이오가스 성상을 분석한 결과 철염 및 탈황(건식, 습식)을 이용하여 전체 시설의 $H_2S$ 평균은 560 ppm으로 측정되었으며, 저감효율이 90% 이상인 경우 약 40 ppm 까지 감소할 수 있는 것을 확인하였다. 특히 소화조 내에 철염을 투입하면 처리효율 약 93 %이며, 평균 150 ppm까지 감소하는 것을 확인하였다. 제습의 경우 노점온도를 적용한 절대습도와 가스온도에 따른 상대습도를 분석하였으며, 제습설비가 유지보수가 잘되어 가동 중인 시설의 노점온도는 $14^{\circ}C$, 절대습도는 $12.6g/m^3$이며, 상대습도는 35 %로 측정되었다. 따라서 유기성폐자원의 바이오가스화 시설의 단점을 보완하고 바이오가스 이용 최적화 방안을 마련하기 위하여 정밀모니터링을 실시하였다.

광화유체의 비등과 희석에 의한 통영 천열수계 Au-Ag-Te 장화작용에 대한 반응경로 모델링 (Au-Ag-Te Mineralization by Boiling and Dilution of Meteoric Ground-water in the Tongyeong Epithermal sold System, Korea: Implications from Reaction Path Modeling)

  • Maeng-Eon Park;Kyu-Youl Sung
    • 자원환경지질
    • /
    • 제34권6호
    • /
    • pp.507-522
    • /
    • 2001
  • 통영광산은 첨열수광상으로서 능망간석 , 백운모, 일라이트, 황철석 , 방연석 , 황동석 , 섬아연석 , 아칸다이트 및 헤사이트등의 광물을 수반하는 초기의 광석광물 침전시기와 후기의 맥석광물 침전시기로 구분된다. 초기는 반복적인 대상구조를 띠고, 황화광물이 침전된 시기로서 텔루리움 광물과 함께 엘렉트럼이 산출된다. 후기에는 주로 단산염 광물과 천금속광물이 침전되었다. 통영 열수계에서 광화단계에 따른 상이한 열수유체의 변천과정을 구체적으로 규명하기 위하여 프로그램 CHILLER를 이용한 수치모델링이 실시되었다. 반응경로 모델링은 28$0^{\circ}C$에서 모암인 안산암과의 반응을 비롯하여, 27$0^{\circ}C$에서 12$0^{\circ}C$까지의 단순한 등압 냉각, 비등과 지하수의 혼입에 따른 희석 및 압력파 온도가 감소되는 조건에서 수행하였다. 모델링 결과 초기 광화유체는 산성용액(pH=5.7)으로 상대적으로 높은 염농도와 금속원소 함량이 높다. 장화유체 내의 금의 함량은 열수계의 천금속원소 총량과 황화물의 활동도에 의해 지배된다. 통영 천열수계에서의 광화작용은 천부에서 일어난 참화유체의 비등과 이에 수반된 가열된 지하수의 흔입에 의한 반응경로를 반영하며, 현미경에서 관찰된 광물공생 특성과 모델링에 의한 침전광물의 조합 및 엘렉트럼의 화학조성 등에서 동일한 경향을 나타낸다. 이러한 유사성은 Te 함유하는 천열수 금 . 은광상이 열수계에서의 비등과 유체혼합(희석)에 의해 생성되었음을 지시한다. 반응경로 모델링 연구는 광상성인을 이해하는 중요한 수단이며, 유사한 지질환경에서의 광강탐사에 유용한 자료로 활용될 것으로 생각된다.

  • PDF