• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.147-167
• /
• 2019

This study was conducted to analyze forest vegetation structure in the Marugeum (Ridge) area of Gitdaebaegibong to Jukryeong, Baekdudaegan. Data were collected in 298 quadrates through a Braun-Blanquet vegetation survey from April, 2018 to October, 2018. Forest vegetation was classified into 13 vegetation units. A Quercus mongolica community was divided into Morus bombycis, Filipendula glaberrima, Fraxinus sieboldiana, Prunus maackii unit and Q. mongolica typical unit. The M. bombycis unit was further classified into a Deutzia glabrata group and M. bombycis typical group. The F. glaberrima unit was subdivided into a Veratrum oxysepalum group, Arundinella hirta group, and F. glaberrima typical group. The F. sieboldiana unit was divided into a Pinus densiflora group, Larix kaempferi group, and F. sieboliana typical group. The relationship between vegetation units and environmental factors was studied through coincidence analysis and CCA. The F. glaberrima unit (VU 6~8) was distributed by elevation above 1,200 m and other vegetation units were distributed below 1,200 m. Results of the CCA analysis showed that the F. glaberrima unit distribution is positively correlated with elevation. As a result of species diversity, the F. glaberrima unit was higher than other vegetation units. A similarity index analysis revealed that the F. sieboldiana unit (VU 9~11) was relatively homogeneous, and the M. bombycis unit (VU 1~5) and A. girta group (VU 7) were relatively heterogeneous. A detrended correspondence analysis determined that the distance between the statistical axes of the M. bombycis and F. glaberrima units was the greatest, which is consistent with the analysis of the similarity index. As a result of interspecific correlation of major woody plants, hydrophilic species were positively correlated, and a negative correlation was found between Q. mongolica and intolerant species such as P. densiflora and L. kaempferi.

• Journal of Nutrition and Health
• /
• v.52 no.5
• /
• pp.488-500
• /
• 2019

Purpose: This study examined the effects of a mobile app-based program to reduce the dietary sugar intake according to the stages of the behavioral change in dietary sugar reduction in female college students. Methods: The program used in this study can monitor the dietary sugar intake after recording the dietary intake and provide education message for the reduction of dietary sugar intake. In an eight-week pre-post intervention study, 68 female college students were instructed to record all the food they consumed daily and received weekly education information. At pre-post intervention, the subjects were asked to answer the questionnaire about sugar-related nutrition knowledge, sugar-intake behavior, and sugar-intake frequency. For statistical analysis, ANOVA and a paired t-test were used for comparative analysis according Precontemplation (PC), Contemplation Preparation (C P), and A M (Action Maintenance) stage. Results: Significant differences were observed in the frequency of snacking, experience of nutrition education, and preference for sweetness according to the stages of behavior change in dietary sugar reduction. After finishing an intervention, the sugar-related nutrition knowledge score was increased significantly in the stages of Precontemplation (PC) and Contemplation Preparation (C P). The score of the sugar intake behavior increased significantly in all stages. The intake frequency of chocolate, muffins or cakes, and drinking yogurt decreased significantly in the PC stage and the intake frequency of biscuits, carbonated beverages, and fruit juice decreased significantly in the C P stage. Subjects in the PC and C P stages had an undesirable propensity in nutrition knowledge, sugar-intake behavior, and sugar-intake frequency compared to the A M stage, but this intervention improved significantly their nutrition knowledge, sugar-intake behavior, and sugar-intake frequency. Conclusion: This program can be an effective educational tool in the stages of PC and C P, and is expected to further increase the usability and sustainability of mobile application if supplemented appropriately to a health platform program.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.995-1007
• /
• 2019

The purpose of this study was to investigate the effects of 12-week elastic band exercise on body composition, blood lipids and AMPK in 24 elderly female volunteers aged 65-75 years, and they were divided into the combined exercise group(n=12) and the control group(n=12). The elastic band exercise method was to do exercise 3 times a week for 60 minutes per session, 1-4 weeks for low intensity of OMNI-RES 3-4, 5-8 weeks for medium intensity of OMNI-RES 5-6, 9-12 weeks for OMNI-RES 7-8 of high intensity. In order to compare the differences in the groups before and after the elastic band exercise, two-way repeated measures ANOVA was used to verify the interaction between group and time. The difference in the groups of the measured data was paired t-test, the difference between the groups was paired independent t-test, and analysis of covariance ANCOVA was performed to minimize the inter-group error. The statistical significance level of each item was set to .05. As a result, body fat percentage of exercise group significantly decreased (p<.05), and skeletal muscle volume was significantly increased (p<.01). TC, TG and LDL-C were not significantly different between the exercise and control groups, and HDL-C was significantly decreased in the control group (p<.05). AMPK was significantly decreased in the exercise group (p<.001), but there was no significant difference in the control group. According to the covariance analysis to minimize the error of difference between the pre-exercise groups (p<.05), there was significant difference in AMPK of groups after exercise. These results suggest that the 12-week elastic band exercise has a positive effect on the body composition and AMPK of the elderly women.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.2
• /
• pp.13-19
• /
• 2019

Purpose Tc-99m HMPAO is widely used radiopharmaceutical for brain perfusion SPECT. Tc-99m HMPAO is chemically unstable and is liable to show deterioration of labeling efficiency due to high incidence of secondary Tc-99m HMPAO complex, free pertechnetate and reduced-hydrolyzed Tc-99m. In this study, we investigated whether sialogogues administration could reduce the impurities of Tc-99m HMPAO. Materials and Methods In thirty subjects(20 male and 10 female, age range 19~89 years, mean age $60.7{\pm}14.5years$), brain perfusion SPECT were performed at basal and citric acid stimulation states consecutively after injection of 555 MBq of Tc-99m HMPAO. In the salivary glands, the uptake coefficient was calculated using Siemens processing program. Statistical comparison between before and after the citric acid stimulation performed paired t-test. P value less than 0.05 was regarded as statistically significant. Results Salivary glands uptake was $12900{\pm}3101$ counts in basal and $10677{\pm}2742$ counts in citric acid stimulation states. Unnecessary impurities in the body is much decreased after citric acid administration(t=10.78, P<0.05). The image quality was much improved after administration of citric acid and the regional cerebral perfusion was clearly from demarcated the background. Conclusion The impurity is distributed throughout the body particularly in the salivary glands and nasal mucosa when Tc-99m HMPAO brain perfusion SPECT is performed. If this impurities is not removed, the quality of the image may deteriorate, resulting in errors in visual evaluation. The use of sialogogues could be helpful for decreasing unnecessary impurities in the body.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.203-210
• /
• 2019

Purpose: The purpose of this study was to verify the effect of the abutment superimposition process on the final virtual model in the scanning process of single and 3-units bridge model using a dental model scanner. Materials and methods: A gypsum model for single and 3-unit bridges was manufactured for evaluating. And working casts with removable dies were made using Pindex system. A dental model scanner (3Shape E1 scanner) was used to obtain CAD reference model (CRM) and CAD test model (CTM). The CRM was scanned without removing after dividing the abutments in the working cast. Then, CTM was scanned with separated from the divided abutments and superimposed on the CRM (n=20). Finally, three-dimensional analysis software (Geomagic control X) was used to analyze the root mean square (RMS) and Mann-Whitney U test was used for statistical analysis (${\alpha}=.05$). Results: The RMS mean abutment for single full crown preparation was $10.93{\mu}m$ and the RMS average abutment for 3 unit bridge preparation was $6.9{\mu}m$. The RMS mean of the two groups showed statistically significant differences (P<.001). In addition, errors of positive and negative of two groups averaged $9.83{\mu}m$, $-6.79{\mu}m$ and 3-units bridge abutment $6.22{\mu}m$, $-3.3{\mu}m$, respectively. The mean values of the errors of positive and negative of two groups were all statistically significantly lower in 3-unit bridge abutments (P<.001). Conclusion: Although the number of abutments increased during the scan process of the working cast with removable dies, the error due to the superimposition of abutments did not increase. There was also a significantly higher error in single abutments, but within the range of clinically acceptable scan accuracy.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.1
• /
• pp.29-41
• /
• 2019

Terrestrial Gross Primary Production (GPP) is the largest global carbon flux, and forest ecosystems are important because of the ability to store much more significant amounts of carbon than other terrestrial ecosystems. There have been several attempts to estimate GPP using mechanism-based models. However, mechanism-based models including biological, chemical, and physical processes are limited due to a lack of flexibility in predicting non-stationary ecological processes, which are caused by a local and global change. Instead mechanism-free methods are strongly recommended to estimate nonlinear dynamics that occur in nature like GPP. Therefore, we used the mechanism-free machine learning techniques to estimate the daily GPP. In this study, support vector machine (SVM), random forest (RF) and artificial neural network (ANN) were used and compared with the traditional multiple linear regression model (LM). MODIS products and meteorological parameters from eddy covariance data were employed to train the machine learning and LM models from 2006 to 2013. GPP prediction models were compared with daily GPP from eddy covariance measurement in a deciduous forest in South Korea in 2014 and 2015. Statistical analysis including correlation coefficient (R), root mean square error (RMSE) and mean squared error (MSE) were used to evaluate the performance of models. In general, the models from machine-learning algorithms (R = 0.85 - 0.93, MSE = 1.00 - 2.05, p < 0.001) showed better performance than linear regression model (R = 0.82 - 0.92, MSE = 1.24 - 2.45, p < 0.001). These results provide insight into high predictability and the possibility of expansion through the use of the mechanism-free machine-learning models and remote sensing for predicting non-stationary ecological processes such as seasonal GPP.

• The Korean Journal of Archival Studies
• /
• no.46
• /
• pp.153-187
• /
• 2015

This study aims to discuss issues about non-existent information of the information disclosure system and to provide alternative strategies for the issues. For the theoretical discussion it reviews the definitions and standards of non-existent information and analyzes legal aspects and statistical changes of non-existent information. Furthemore, in order to discuss a current status and problems of non-existent information at the central administrative agencies, it analyzes the cases of the non-existent information notification. According to analysis results, non-existent information status of the surveyed institutions is a total of 4,421 cases for three years and it shows the continuous increasing trend year after year. The number of institutions that have the number of non-existent information equal to the number of nondisclosures or over it reached about 40%. It means excluding non-existent information from the reasons of nondisclosure influenced disclose rates and nondisclosure rates of many agencies. In the type analysis of the non-existent information reasons, the most main reason, the case of not producing or receiving the requested information by public institutions takes over 75% among the whole reasons. The next reason is the case of collecting or processing information takes over 7-10%. This study found the operational issues, as analyzing notifications of non-existent information. The operational issues are 1) the incomplete explanation of non-existent information, 2) the unclear scope of the collection and processing, 3) the problem of the transfer processing, and 4) the problem of recording management. Therefore, this study suggested some improvements of the perspective and the technical and procedural aspects. First, information disclosure issues including non-existent information are to be understood as an extension of records management. Second, disclosure service should improve overall based on advanced understanding. Third, the management procedures of non-existent information should be improved. Fourth, specific guidelines for handling non-existent information should be developed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.92-96
• /
• 2018

Purpose In case of nuclear medical hepatobiliary scan, To quantitatively evaluate contractility of a gallbladder, gallbladder ejection fraction (GBEF%) is calculated from anterior images using fatty meal. However, when a gallbladder and other organs overlap on an anterior image, the gallbladder ejection fraction is not accurately evaluated. In order to reduce this error, the objective of our study was to figure out whether there is a significant difference in GBEF% calculated from the anterior and right lateral images. Materials and Methods After intravenous injection of 99mTc-Mebrofenin 370 MBq to randomly 50 patients who visited our hospital, we started to examine nuclear hepatobiliary scan. Using skylight(Philips, United States), we acquired anterior and right lateral image at 10 minutes, 20 minutes, 30 minutes, 60 minutes, 90minutes after injection. Using images at 60 and 90 minutes, gallbladder ejection fraction (GBEF%) was calculated from the anterior and right lateral images using JETstream workspace. For drawing more accurate ROI, CT images were referenced and 4 radiologists calculated the GBEF% in the same image and calculated the average value. We assessed whether there was a significant difference in GBEF% calculated from the anterior and right lateral images using SPSS program(Statistical Package for the Social Science, SPSS Ver.18 Inc. USA). Results About randomly 50 patients, the average value of the GBEF% calculated from the anterior image was 63.212 and the average value of the GBEF% calculated from the right lateral image was 62.666. GBEF% decreased 0.433% on the right lateral image compared with anterior image. Result of paired sample t-test, p value is over 0.05. So, there was no significant difference in GBEF% calculated from the anterior and right lateral images. Conclusion In the case that a gallbladder and other organs are not separated on an anteior image, Right lateral image would be better to acquire more accurate GBEF% than using anterior image.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.110-117
• /
• 2019

Purpose: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. Materials and methods: Four types of resin materials made with different methods were examined: Stereolithography apparatus (SLA) 3D printed resin (S3P), digital light processing (DLP) 3D printed resin (D3P), milled resin (MIL), conventionally self-cured resin (CON). In the 3D printed resin specimens, the build orientation and layer thickness were set to $0^{\circ}$ and $100{\mu}m$, respectively. The specimens were tested in a 2-axis chewing simulator with the steatite as the antagonist under thermocycling condition (5 kg, 30,000 cycles, 0.8 Hz, $5^{\circ}C/55^{\circ}C$). Wear losses of the specimens were calculated using CAD software and scanning electron microscope (SEM) was used to investigate wear surface of the specimens. Statistical significance was determined using One-way ANOVA and Dunnett T3 analysis (${\alpha}=.05$). Results: Wear losses of the S3P, D3P, and MIL groups significantly smaller than those of the CON group (P < .05). There was no significant difference among S3P, D3P, and MIL group (P > .05). In the SEM observations, in the S3P and D3P groups, vertical cracks were observed in the sliding direction of the antagonist. In the MIL group, there was an overall uniform wear surface, whereas in the CON group, a distinct wear track and numerous bubbles were observed. Conclusion: Within the limits of this study, provisional resin materials made with 3D printing show adequate wear resistance for applications in dentistry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.118-126
• /
• 2019

Purpose: This research is to investigate factors that affect dental aesthetics and analyze whether individual perception affects and difference of genders affects the esthetic factors. Materials and methods: Seventy dental students of Chonnam University aged from 25 to 35 years old without periodontal problems were included. Maxillary dental cast for participants were made, and standardized photo was taken with a digital camera. Maximum visual width and the position of gingival zenith of maxillary anterior teeth and maximum height of the maxillary central incisors were measured by a measurement program and the shape of central incisor was categorized. Questionnaire was conducted to evaluate esthetic perception. SPSS program was used to perform statistical analysis. Results: The average visual width ratio of right maxillary anteriors was 1.38:1:0.78 and 1.41:1:0.81 for the left which differ from the golden ratio. The width to height ratio for right and left central incisor was 0.84 and 0.83 respectively. The gingival zenith position was determined to be: mostly, central incisors and canines were located in the distal side, lateral incisors were located in the center. The visual width ratio of right maxillary anterior teeth, ratio of width to height of central incisor, gingival zenith position, crown morphology and amounts of gingival exposure upon smiling were not significantly different between genders, and facial patterns and these dental esthetic factors were not related to aesthetic perception. Conclusion: Even though participants had the visual width ratio of maxillary anteriors or ideal width to ideal height of central incisors that did not agree with the golden ratio, they had high satisfaction for dental esthetics. Esthetic perception depends more on subjective judgements of participants than objective indices.