• 대한산업공학회지
• /
• 제19권2호
• /
• pp.35-41
• /
• 1993

Statistical calibration is a useful technique for achieving compatibility between two different measurement methods, and it usually consists of two steps : (1) estimation of the relationship between the standard and nonstandard measurements, and (2) prediction of future standard measurements using the estimated relationship and observed nonstandard measurements. A predictive multivariate errors-in-variables model is presented for the multivariate calibration problem in which the standard as well as the nonstandard measurements are subject to error. For the estimation of the relationship between the two measurements, the maximum likelihood (ML) estimation method is considered. It is shown that the direct and the inverse predictors for the future unknown standard measurement are the same under ML estimation. Based upon large-sample approximations, the mean square error of the predictor is derived.

• 응용통계연구
• /
• 제16권1호
• /
• pp.33-44
• /
• 2003

조사과정에서 필연적으로 발생하는 무응답을 보정하기 위해 보조정보를 사용해야 한다. 이 때, 이용 가능한 보조정보의 차원이 크면, 계산과정에서 많은 시간이 소요되며 데이터를 다루기가 매우 어렵다. 또한 추정량의 분산이 보조전보의 차원에 의존하기 때문에 과소추정의 문제가 발생한다. 이러한 문제를 해결하기 위해 무응답 보정에서 적절한 보조정보의 선택 방법을 제안하였고, 이에 대한 효율성을 모의실험을 통해 살펴보았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2372-2374
• /
• 2003

With 3-D vision measuring, camera calibration is necessary to calculate parameters accurately. Camera calibration was developed widely in two categories. The first establishes reference points in space, and the second uses a grid type frame and statistical method. But, the former has difficulty to setup reference points and the latter has low accuracy. In this paper we present an algorithm for camera calibration using perspective ratio of the grid type frame with different line widths. It can easily estimate camera calibration parameters such as focal length, scale factor, pose, orientations, and distance. But, radial lens distortion is not modeled. The advantage of this algorithm is that it can estimate the distance of the object. Also, the proposed camera calibration method is possible estimate distance in dynamic environment such as autonomous navigation. To validate proposed method, we set up the experiments with a frame on rotator at a distance of 1,2,3,4[m] from camera and rotate the frame from -60 to 60 degrees. Both computer simulation and real data have been used to test the proposed method and very good results have been obtained. We have investigated the distance error affected by scale factor or different line widths and experimentally found an average scale factor that includes the least distance error with each image. It advances camera calibration one more step from static environments to real world such as autonomous land vehicle use.

• Communications for Statistical Applications and Methods
• /
• 제22권6호
• /
• pp.655-664
• /
• 2015

A nonresponse adjusted raking ratio estimator that consists of weighting adjustment using estimated response probability and raking procedure is often used to reduce the nonresponse bias and keep the calibration property of the estimator. We investigated asymptotic properties of nonresponse adjusted raking ratio estimator and proposed a variance estimator. A simulation study is used to examine the performance of suggested estimators.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.665-678
• /
• 2003

In this paper we suggest the new calibration estimator, which is called to the recalibration estimator, and its variance estimator using two-phase sampling technique according to the auxiliary information having strong correlation with the variable of interest under the unit nonresponse. In this unit nonresponse situation, an available information may exists at the level of whole population or the first-phase sample. The proposed recalibration estimator derives from the first and second phase weights respectively.

• 응용통계연구
• /
• 제10권2호
• /
• pp.261-274
• /
• 1997

기존에 제안되어온 판별분석 기법이 대상으로 하는 대부분의 자료는 각 개체가 어느 한 특정한 집단에 전적으로 소속되어 있는 것으로 국한되어 왔다. 그러나 오늘날 (0-1)의 이치논리가 퍼지(Fuzzy) 개념과 다치논리로 확장되는 현상은 어느 한 개체를 꼭 한개의 집단에만 국한시키는 관점 역시 변화를 요구하고 있다고 본다. 이에 본 논문에서는 한 개체가 어떤 소속확률을 갖고 여러개의 집단에 소속되어 있는 상황을 고려하여 이러한 개체들로 구성된 학습표본으로부터 판별분석 규칙을 개발하는 것을 목표로 하였다. 방법론으로는 개체들의 특성벡터와 소속상태의 관계를 역추정(calibration) 모형으로 표현하고 판별대상개체의 특성벡터가 주어졌을 때 소속상태를 추정하도록 하며 이때 추정은 베이지안 방법, Metropolis 알고리즘 등을 사용하였다. 또한 제안된 판별규칙의 평가를 위한 기준을 제안하고 두개의 자료를 기존의 다른 규칙들과 함께 분석하여 결과를 비교하였다.

• 한국농공학회논문집
• /
• 제51권1호
• /
• pp.1-9
• /
• 2009

The objective of this paper was to evaluate the auto-calibration with multi-objective optimization method to calibrate the parameters of the Soil and Water Assessment Tool (SWAT) model. The model was calibrated and validated by using nine years (1996-2004) of measured data for the 384-ha Baran reservoir subwatershed located in central Korea. Multi-objective optimization was performed for sixteen parameters related to runoff. The parameters were modified by the replacement or addition of an absolute change. The root mean square error (RMSE), relative mean absolute error (RMAE), Nash-Sutcliffe efficiency index (EI), determination coefficient ($R^2$) were used to evaluate the results of calibration and validation. The statistics of RMSE, RMAE, EI, and $R^2$ were 4.66 mm/day, 0.53 mm/day 0.86, and 0.89 for the calibration period and 3.98 mm/day, 0.51 mm/day, 0.83, and 0.84 for the validation period respectively. The statistical parameters indicated that the model provided a reasonable estimation of the runoff at the study watershed. This result was illustrated with a multi-objective optimization for the flow at an observation site within the Baran reservoir watershed.

• 한국분무공학회지
• /
• 제20권4호
• /
• pp.247-253
• /
• 2015

Recently, the engine calibration technique has been much more complicated than that of the past engine case in order to satisfy the strict emission regulations. The current calibration method for the diesel engine which has an increasing market is both costly and time-consuming. New engine calibration method is required to develop for high-quality diesel engines with low cost and release it at the appropriate time. This study provides the optimal calibrating technique for complex engine systems using statistical modeling and numerical optimization. Firstly, it design a test plan based on Design of Experiments, a V-optimality methodology which is suitable looking for set-points, and determine the shape of test engine response. Secondly, it uses functions to make linear regression model for data analysis and optimization to fit the models of engines behavior. Finally, it generates the optimal calibrations obtained directly from empirical engine models using Grey Relational Analysis and compares the calibrations with data. This method can develop a process for systematically identifying the optimal balance of engine emissions.

• 기계저널
• /
• 제54권2호
• /
• pp.52-57
• /
• 2014

이 글에서는 컴퓨터 이용 공학(CAE : Computer Aided Engineering) 기술이 발달함에 따라 갈수록 중요해지는 통계적 모델 검증 및 보정(Statistical Model Validation and Calibration)을 수행하는 데 필요한 통계적인 기법들을 각 단계별로 상세하게 소개하고, 실제 제품 개발에 적용하는 데 있어서 예상되는 어려움과 향후 연구방향을 제시하고자 한다.

• 한국수자원학회논문집
• /
• 제39권8호
• /
• pp.677-690
• /
• 2006

본 연구에서는 LH-OAT (Latin Hypercube Ore factor At a Time) 민감도분석 방법과 SCE-UA (Shuffled Complex Evolution at University of Arizona) 최적화 기법을 적용하여 보청천 유역에서 SWAT모형에 대한 자동보정 방법을 제시하였다. LH-OAT 방법은 전역 민감도분석과 부분 민감도 분석의 장점을 조합하여 가용매개변수 공간에 대하여 효율적으로 매개변수의 민감도 분석이 가능하게 하였다. LH-OAT민감도 분석으로부터 결정된 매개변수의 민감도 등급은 SWAT 모형의 자동보정 과정에서 요구되는 보정대상 매개변수의 선택에 유용하게 적용될 수 있다. SCE-UA 방법을 적용한 SWAT모형의 자동보정 해석결과는 보정자료, 보정매개변수, 통계적 오차의 선택에 따라서 모형의 성능이 좌우되었다. 보정기간과 보정매개변수가 증가함에 따라 검증기간에 대한 RMSE (Root Mean Square Error), NSEF (Nash-Sutcliffe Model Efficiency), RMAE (Relative Mean Absolute Error), NMSE (Normalized Mean Square Error) 등의 모형오차는 감소하였지만, NAE (Normalized Average Error) 및 SDR(Standard Deviation Ratio)은 개선되지 않았다. SWAT모형의 보정에 적용되는 보정자료, 보정매개변수 및 모형평가를 위한 통계적 오차 선택이 해석결과에 미치는 복잡한 영향을 이해하기 위하여 다양한 대표유역을 대상으로 추가적인 연구가 필요하다.