• 소음진동
• /
• 제5권2호
• /
• pp.197-206
• /
• 1995

Microphone array is designed to measure the equivalent source height of vehicle noise. The equivalent source position is defined for an arbirary distribution of acoustic sources above a perfectly reflecting plane and a microphone array for its measurement is developed. The normalized errors of the measured equivalent source heights are defined including the effects of background noise, the geometric near field, and source size. Normalized errors of the measured source heights obtained by a nemerical simulation for each parameter lead to optimization of the microphone spacing and to the design of an array which gives the equivalent source height as a function of frequency. The performance of the designed array is verified using the stationary loudspeaker experiments.

• 한국대기환경학회지
• /
• 제33권4호
• /
• pp.342-350
• /
• 2017

We report mass concentration and size fraction of TPM, $PM_{10}$ and $PM_{2.5}$ according to Korea standard test method (ES 01301.1 and ES 01317.1) and ISO 23210 methods. Particulate matters were sampled in large stationary emission sources such as a coal power plant and B-C oil refinery. The Korea standard test method PM mass concentrations showed 3~3.5 times larger than the cascade impactor method. On the other hand, the size fraction results showed less than 5% difference (i.e. $PM_{2.5}/PM_{10}$) between two methods. Moreover, the correlation coefficient ($r^2$) is 0.84 between TPM results of the Korea standard test method and CleanSYS. These results suggested not only improvement of current test criteria in terms of technical and theoretical aspects. Further, additional measurements are required in various large stationary sources to compare current field data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.2375-2393
• /
• 2016

Key agreement is paramount in secure wireless communications. A promising approach to address key agreement schemes is to extract secure keys from channel characteristics. However, because channels lack randomness, it is difficult for wireless networks with stationary communicating terminals to generate robust keys. In this paper, we propose a Robust Secure Key Agreement (RSKA) scheme from Received Signal Strength (RSS) in stationary wireless networks. In order to mitigate the asymmetry in RSS measurements for communicating parties, the sender and receiver normalize RSS measurements and quantize them into q-bit sequences. They then reshape bit sequences into new l-bit sequences. These bit sequences work as key sources. Rather than extracting the key from the key sources directly, the sender randomly generates a bit sequence as a key and hides it in a promise. This is created from a polynomial constructed on the sender's key source and key. The receiver recovers the key by reconstructing a polynomial from its key source and the promise. Our analysis shows that the shared key generated by our proposed RSKA scheme has features of high randomness and a high bit rate compared to traditional RSS-based key agreement schemes.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.281-287
• /
• 2011

The stationary discontinuous armatures that are used in permanent magnet linear synchronous motors (PM-LSMs) have been proposed as a driving source for transportation systems. However, the stationary discontinuous armature PM-LSM contains the outlet edges which always exist as a result of the discontinuous arrangement of the armature. For this reason, the high alteration of the outlet edge cogging force produced between the armature's core and the mover's permanent magnet when a mover passes the boundary between the armature's installation part and non-installation part has been indicated as a problem. Therefore, we have examined the outlet edge cogging force by installing the auxiliary teeth at the armature's outlet edge in order to minimize the outlet edge cogging force generated when the armature is arranged discontinuously. Moreover, we obtained the calculation by analyzing the shape of the auxiliary teeth in which the outlet edge cogging force is minimized the most.

• 한국전자파학회논문지
• /
• 제13권2호
• /
• pp.107-114
• /
• 2002

미지의 신호원들의z 합성으로부터 관측된 신호만을 이용하여 통계적으로 독립인 원신호를 추출하는 문제를 블라인드 신호분리라 한다. 본 논문에서는 보통의 실내에서 얻어진 비정상(non-stationary) 합성신호로부터 원신호론 추출해내는 블라인드 신호분리 기법을 제안한다. 제안된 기법은 관측 신호들 간의 이타 상호상관 값이 제로가 될 때만 최소값을 가지는 비용함수를 최소화시키는 방식으로 블라인드 신호분리를 구현한다. 제안된 기법의 유효성을 컴퓨터 시뮬레이션과 보통의 실내에서 관측된 2개의 합성신호로부터 2개의 원신호를 추출해내는 실험을 통하여 증명한다.

• 한국항공우주학회지
• /
• 제37권2호
• /
• pp.113-120
• /
• 2009

로터-기체 사이의 간섭작용을 정확하게 계산하기 위해서는 로터의 회전을 사실적으로 모사할 수 있는 로터-기체 결합형상의 Navier-Stokes 해석이 필요하다. 하지만 회전하는 로터를 포함한 전기체를 해석할 경우 격자가 증가함에 따라 계산 비용과 시간이 증가된다. 모멘텀 소스 방법은 로터를 디스크 격자에 모멘텀 소스로 대체하여 시간 평균된 로터-기체의 간섭작용을 해석하므로 비교적 경제적이면서도 정확한 결과를 얻을 수 있다. 일반적으로 모멘텀 소스 값은 블레이드 요소 이론을 이용하여 구하지만 결과의 정확성이 떨어진다. 따라서 본 연구에서는 모멘텀 소스를 Moving mesh 방법을 이용한 Navier-Stokes 계산을 통해 구하여 정확성을 높였다. 이 모멘텀 소스 값을 이용하여 정상해석을 하여 실험결과와 비교하였다. 기존의 모멘텀 소스 방법은 시간 평균된 유동장만 관찰할 수 있으므로 비정상 유동장을 관찰하기 위하여 비정상 로터-기체 간섭작용 해석 모델을 개발하여 실험결과와 비교해 보았다. 검증을 위하여 간단한 형상인 Georgia Tech 형상을 사용하여 실험결과와 비교해 보았으며 본 연구의 계산결과가 실험결과와 잘 일치하는 것을 볼 수 있었다.

• 한국전자통신학회논문지
• /
• 제5권6호
• /
• pp.613-619
• /
• 2010

최근 반송장치 시스템의 구동원으로 전기자 분산배치를 이용한 영구자석 리니어 동기 모터가 사용되고 있다. 하지만, 전기자 분산배치를 이용한 영구자석 리니어 동기 모터는 구조상 필연적으로 단부가 존재하게 된다. 이러한 이유로 전기자의 철심과 가동자의 영구자석 사이에 단부 코깅력이 발생한다. 본 논문은 유한요소법을 이용한 2차원 수치해석을 통해 단부 코깅력을 고찰하였다. 또한, 단부 코깅력을 최소화하기 위해 가동자에 보조극을 설치한 형상을 제안하였다.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.77-82
• /
• 2008

Strain-gauges have been dominantly used to measure strain at various points on a rotor, however, either a slip ring or telemetry has to be used to send sensor signals to data acquisition instruments at stationary side. Both slip ring and telemetry have numerous inherent problems which force severe limitations in real applications. This paper introduces a new rotor condition monitoring system using FBG(Fiber Bragg Grating) sensors and a rotary optical coupler. A single optical fiber with many FBG sensors is installed on the rotor and an optical dynamic interrogator is installed at stationary side. The sensor signal connection between rotating part and stationary part is made by the rotary optical coupling method which makes use of light's unique characteristic-light travels through space. Broad band light source from the interrogator travels to the optical fiber on the rotor and reflected FBG sensor signals travel back to the optical fiber on stationary side and are connected to the interrogator. Rotary optical coupler's insertion loss change due to rotation is compensated by using a reference sensor installed at the center of the rotor. The proposed system's performance has been successfully demonstrated by accurately measuring strains at 5 points on a blade rotating at high speed.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1626-1633
• /
• 2021

In an industrial field, non-destructive testing (NDT) is commonly used to inspect industrial products. Among NDT methods using radiation sources, X-ray laminography has several advantages, such as high depth resolution and low computational costs. Moreover, an X-ray laminography system with stationary source array and compact detector is able to reduce mechanical motion artifacts and improve inspection efficiency. However, this system, called stationary inverse-geometry X-ray laminography (s-IGXL), causes truncation artifacts in reconstructed images due to limited fields-of-view (FOVs). In this study, we proposed a projection data correction (PDC) method to reduce the truncation artifacts arisen in s-IGXL images, and the performance of the proposed method was evaluated with the different number of focal spots in terms of quantitative accuracy. Comparing with conventional techniques, the PDC method showed superior performance in reducing truncation artifacts and improved the quantitative accuracy of s-IGXL images for all the number of focal spots. In conclusion, the PDC method can improve the accuracy of s-IGXL images and allow precise NDT measurements.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2002년도 하계학술발표대회 논문집 제21권 1호
• /
• pp.41-44
• /
• 2002

Blind source separation (BSS) is a fundamental problem that is encountered in many practical applications. In most existing methods, stationary sources are considered higher-order statistics is necessary either explicitly or implicitly. But, many natural signals are nonstationary, and it is possible to perform BSS using only second-order statistics. Our method is based on only second order statistics. The algorithms are developed using the gradient descent method in orthogonality constraint and their performance is confirmed by numerical experiments.