• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1989년도 춘계학술대회
• /
• pp.27-28
• /
• 1989

In conventional line scan angiography, flow signal has been enhanced by the time_of_flight effect while the signal from stationary tissues has been suppressed by the saturation rf pulse followed by spoiling gradients. Due to the inhomogeneous rf field and the tissue dependent T1 relaxation time, however, stationary tissues can not be suppressed completely or uniformly, and the remnant stationary signal deteriorates the resultant angiogram. Here, the complete cancellation of stationary tissues is made possible by the spectral analysis of a series of repetitive line images of the same slice. The Fourier transformation of a set of line images results in the spectrum images, where stationary tissues are collected into the dc component while arteries are included in harmonic components because of the variation of the flow velocity and the resultant flow signal in arteries according to the cardiac cycle. The summation of harmonic components excluding the dc component results in the angiogram of arteries with the complete cancellation of stationary tissues.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.128-139
• /
• 2000

Environmental concerns and shortage of petroleum have promoted considerable interest in the use of alternate fuels in stationary diesel engine. In this study, a heavy-duty, intercooler-turbocharged 6-cylinder stationary diesel engine was converted into stationary gas engine fueled with propane or natural gas for the cogeneration plants. One of the most important factors in the combustion features of a stationary gas engine is the fuel composition and operating parameters in terms of compression ratio, spark advance, and engine loads. Experiments with different fuel gas and load conditions were carried out with combustion pressure analysis and NOx measurement. Combustion analysis based on P-$\theta$ diagrams was also investigated by means of combustion duration and cycle variation. Compression ratio is 10.0 and ignition timing is set by using the gasoline setting as a base line and advanced toward BTDC. The results show that fuel composition and spark advance have dominant effects on combustion and NOx characteristics at operating conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.403-413
• /
• 1996

Two-phase self-organizing neuro-modeling (SONM). the global SONM and local SONM, is designed for tracking non-stationary manufacturing processes. Radial basis function (RBF) neural network is employed, and self-tuning estimator is also developed for the determination of RBF network parameters on-line. A pattern recognition approach is presented for identifying a correct RBF neural network, which is used for identifying current manufacturing processes. Experimental results showed that the proposed approach is suitable for tracking non-stationary processes.

• 응용통계연구
• /
• 제22권3호
• /
• pp.541-551
• /
• 2009

Generalized processor sharing(GPS) service policy is a scheduling algorithm to allocate the bandwidth of a queueing system with multi-class input traffic. In a queueing system with single-class traffic, the stationary queue length becomes larger stochastically when the bandwidth (i.e. the service rate) of the system decreases. For a given GPS server, we consider the similar problem to this. We define the monotonicity for the head of the line processor sharing(HLPS) servers in which the units in the heads of the queues are served simultaneously and the bandwidth allocated to each queue are determined by the numbers of units in the queues. GPS is a type of monotonic HLPS. We obtain the HLPS server whose queue length of a class stochastically bounds upper that of corresponding class in the given monotonic HLPS server for all classes. The queue lengths process of all classes in the obtained HLPS server has the stationary distribution of product form. When the given monotonic HLPS server is GPS server, we obtain the explicit form of the stationary queue lengths distribution of the bounding HLPS server. Numerical result shows how tight the stochastic bound is.

• Journal of electromagnetic engineering and science
• /
• 제13권2호
• /
• pp.86-92
• /
• 2013

The present paper defines diversity gain for stationary users. This deals in particular with gathering the received signal statistics over possible user positions and orientations in space rather than over time, and to define a meaningful diversity gain related to the cumulative improvement of the performances of the 1% users with the worst receiving conditions. The definition is used to evaluate diversity gain for some typical small antennas in an extreme environment with only line-of-sight (LOS). The LOS environment is regarded as user-distributed 3D-random LOS caused by the statistics of an ensemble of stationary users with arbitrary orientations in the horizontal plane (2D), and with arbitrary orientations of their wireless devices in the vertical plane. Thus, an overall 3D-random distribution of user orientation is assumed.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.154-160
• /
• 2020

본 논문에서는 계통연계인버터용 정지좌표기반 전류제어알고리즘을 제안한다. PI 제어기는 계통 연결 인버터의 전류 제어기로 사용되고 있다. 정지좌표기반 PI 제어기를 사용할 경우, AC 신호 제어로 인하여 정상 상태 오류와 위상지연현상이 발생한다. 본 논문에서는 전향보상기를 추가하여 명령 추적 성능을 높이고 과도 응답을 개선하는 방법을 제안한다. 또한 계통 전압을 외란으로 사용하여 계통 오류 발생 시 시스템을 보호하기 위해 외란을 측정 및 제거하는 제어 방법을 제안한다. 제안된 제어 방법은 수학적으로 유도하고 전달 함수로 표현하였으며 시뮬레이션을 통하여 검증하였다.

• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.13-20
• /
• 2020

Accurate parameters based on equivalent circuit are required for high-performance field-oriented control in a three-phase induction motor. In a normal case, stator resistance can be accurately measured using a measuring equipment. Except for stator resistance, all machine parameters on the equivalent circuit should be estimated with particular algorithms. In the viewpoint of traditional regions, the parameters of an induction motor can be identified through the no-load and standstill test. This study proposes an identification method that uses the d-axis model of the induction motor in a stationary frame with the predefined information on stator resistance. Mutual inductance is estimated on the rotational dq coordination similar to that in the traditional no-load experiment test. The leakage inductance and rotor resistance can be estimated simply by applying different voltages and frequencies in the d-axis model of the induction motor. The proposed method is verified through simulation and experimental results.

• 전기학회논문지P
• /
• 제61권3호
• /
• pp.140-148
• /
• 2012

Aeronautical lights, which are internationally standardized sequence of colors and placements, are aeronautic safety devices that provide visual information to pilots by continuously adjusting their light intensity to appropriate level. In this paper, we consider the development testing for in pavement LED aeronautical light system such as taxiway centerline, stop line and temporary stop line. The test results of LED sourced lights have shown a drastic improvement in power consumption levels and cost efficiency compared to their halogen sourced counterparts The LED light used only 42.7% as much power as their halogen sourced counterparts. Taking installation costs into account, LED will cost only 58% of its halogen counterparts. These results suggest that developing the LED sourced aeronautical light would result in globally competitive products thar guarantees satisfaction to their consumers, and that both cost effective and energy efficient.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.95-106
• /
• 1991

A numerical computation of turbulent wirling flow in a stationary pipe is presented in this work. Major concerns of this study are: 1) To approve similarity laws which were verified experimentally. 2) To investigate the effects of curvature modification for the K- .epsilon. model. To account for effects of swirl, Rodi's curvature correction and Kim & Chung's are applied. The governing differential equations for eliptic flow are discretized by control volume formulation method, and the discretized equations are calculated ay line by line TDMA and SIMPLE algorithm. The computational results also satisfy similarity laws which are based on swirl angle as in experiments. And the curvature modification of Rodi improves compuational accuacy than the standard K- .epsilon. model. But such lower order closure models are not adequate for the prediction of this complex flow.

• 물과 미래
• /
• 제28권5호
• /
• pp.219-233
• /
• 1995

강우의 평균과 분산이 시 공간적으로 변하는 비정상 다변량 모형을 강우모형으로 선정하였다. 그리고 강우모형의 상태 및 매개변수의 추정을 위해 비정상 대변량 모형의 잔차항에 Kalman Filter 순환추정 알고리즘을 적용하여 강우예측모형 시스템을 구성하였다. 그후 반응시간이 짧은 도시지역에 설치된 T/M 강우관측소에 입력되는 매 시간(10분간격) 강우자료를 사용하여 호우개수방법에 의한 비정상(Non-stationary) 평균과 분산의 추정 그리고 호우속도 추정을 통한 정규잔차 공분산을 추정하여 다수의 지점들 및 선행시간들의 실시간 다변량 단기 강우예측 (On-line, Real-time, Multivariate Short-term, Rainfall Prediction)을 하였다. 강우예측시스템 모형에 의한 결과와 비정상 변량 모형에 의한 강우모의 결과가 잘 일치하였다. 그리고 예측정도를 측정하는 방법인 제곱 평균 제곱근 오차(RMSE)와 모형 효율성 계수(ME)를 분석한 결과, 강우 예측시간 즉 선행시간이 갈수록 제곱 평균 제곱근 오차가 커지고 모형 효율성 계수가 1로부터 점차 작아지는 것으로 보아 강우예측 정도가 떨어지는 것을 알 수 있었다. 또한 호우개수방법으로 구한 평균이 호우구조의 많은 부분을 차지하고 있음을 알 수 있었다.