• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.2 s.245
• /
• pp.126-135
• /
• 2006

The pressure drop characteristics in a rotating two-pass duct with rib turbulators are investigated in the present study. The square duct has a hydraulic diameter $(D_h)$ of 26.7 mm, and $1.5mm{\times}1.5mm$ square $90^{\circ}-rib$ turbulators are attached on the leading and trailing walls. The pitch-to-rib height ratio (p/e) is 10. The distance between the tip of the divider and the outer wall of the duct is $1.0D_h$ and the width of divider wall is 6.0mm or $0.225D_h$. The Reynolds number (Re) based on the hydraulic diameter is kept constant at 10,000 to exclude the Reynolds effect, and the rotation number (Ro) is varied from 0.0 to 0.20. The pressure drop distribution, the friction factor and thermal performance are presented for the leading, trailing and the outer surfaces. It is found that the curvature of the $180^{\circ}$-turn produces Dean vortices that cause high pressure drop in the turn. The channel rotation results in pressure drop discrepancy between leading and trailing surfaces so that non-dimensional pressure drops are higher on the trailing surface in the first-pass and on the leading and side surfaces in the second-pass. In the turning region, Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequent pressure drop characteristics also change. As the rotation number increases, the pressure drop discrepancy enlarges.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.36.3-37
• /
• 2015

4C39.25 (0923+392) is a distant radio loud AGN placed at redshift 0.695. The motivation of our work is peculiar properties 4C39.25. Firstly, it has a conspicuous distinction of jet direction between kilo-parsec scale observation made by VLA (Kollgaard et al. 1990) and the parsec scale observation by VLBA (Kellermann et al. 1998). This might indicate episodic-jet activity which recently turned on. This object currently shows two stationary compact parsec-scale components which are bright jet component on east and less luminous core on west. Also, it is known that there have been superluminal jet components which are flowing from the core toward east, and then merging with the bright jet component (Marscher et al. 1991, Alberdi et al. 2000, Lister et al. 2013). Although 4C39.25 seems to be a blazar-like source having broad emission lines (SDSS) and superluminal motion, its property that jet component is brighter than the core is different from ordinary blazars. Furthermore, it has young radio galaxy-like properties such as non-variation in total flux (Alberdi et al. 1997, 2000, MOJAVE database) and high frequency peak at spectral energy distribution (Orienti et al 2007). Such complex properties led us to make recent observations to reveal precise properties and new changes of the source. We used Korean VLBI Network (KVN) and VLBI Exploration of Radio Astronomy (VERA) Array (KaVA) which provide high-frequency (23GHz and 43GHz) and high spatial resolution (1.2mas and 0.6mas). Therefore, this system is suitable for morphological and physical research on parsec scale structure. We present results for several epochs observed during 2013 to 2014, mainly focusing on morphological changes of 4C39.25 using KaVA images.

• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.295-300
• /
• 1994

It was the purpose of present study to develop a new thermoseed for heating deep-seated tumors and assessment of the effect of magnetic control on thermoseeds. Aqueous suspension of iron micro spheres (Ferropolysaccharide) was injected directly into the VX-2 hepatoma and heated with 1.2 MHz inductive radiofrequency unit. Aqueous thermoseed suspension was delivered to the tumor by simple percutaneous injection. The limitation of the thermoseed heating method is the positional change of thermoseed particles in the tumor after implantation. The thermoseed particles could enter the systemic blood circulation and cause a severe embolization of a critical organ. To minimize this limitation, we have used the magnetic control after loading the thermoseed in the tumor, W hen ferropolysaccharides were exposed to a strong magnetic field, they magnetized and subsequently exerted a magnetic force on each other, forming larger aggregates of particles. The size of aggregated Particles were too big to enter the systemic blood circulation. Thus, unlike other thermoseed method, we hold the thermoseed particles stationary in the tumor. The temperature of the injected site and immediate vicinity elevated by $4-5^{\circ}C$. The temperature of the surrounding normal hepatic tissue elevated by $1-2^{circ}C$ only. The heating effect within the tumor was variable depending on the density of ferromagnetic aqueous suspension. Our results suggest that inductive heating of tumor injected with ferropolysaccharide solution offers the possibility of effective heat delivery to the defined tumor volume, which is difficult to heat with other heating devices.

• Korean Journal of Optics and Photonics
• /
• v.21 no.6
• /
• pp.241-246
• /
• 2010

In this paper, we propose an electric field enhanced postexposure baking (EFE-PEB) method to obtain deep and high aspect ratio pattern profile in near-field recording. To describe the photoacid distribution under an external electric field during the PEB, we derived the governing equations based on Fick's second law of diffusion. From the results of the numerical calculations, it is found that the vertical movement of photoacid increases while the lateral movement is stationary as electric field varies from 0 to $8.0{\times}10^6\;V/m$. Also, it is proven that the profile of near-field recording is improved by using the EFE-PEB method with increased depth, higher aspect ratio and larger sidewall angle.

• Wind and Structures
• /
• v.30 no.6
• /
• pp.617-631
• /
• 2020

Wake-induced aerodynamics of yawed circular cylinders with smooth and grooved surfaces in a tandem arrangement was studied. This pair of cylinders represent sections of stay-cables with smooth surfaces and high-voltage power conductors with grooved surfaces that are vulnerable to flow-induced structural failure. The study provides some insight for a better understanding of wake-induced loads and galloping problem of bundled cables. All experiments in this study were conducted using a pair of stationary section models of circular cylinders in a wind tunnel subjected to uniform and smooth flow. The aerodynamic force coefficients and vortex-shedding frequency of the downstream model were extracted from the surface pressure distribution. For measurement, polished aluminum tubes were used as smooth cables; and hollow tubes with a helically grooved surface were used as power conductors. The aerodynamic properties of the downstream model were captured at wind speeds of about 6-23 m/s (Reynolds number of 5×10⁴ to 2.67×10⁵ for smooth cable and 2×10⁴ to 1.01×10⁵ for grooved cable) and yaw angles ranging from 0° to 45° while the upstream model was fixed at the various spacing between the two model cylinders. The results showed that the Strouhal number of yawed cable is less than the non-yawed case at a given Reynolds number, and its value is smaller than the Strouhal number of a single cable. Additionally, compared to the single smooth cable, it was observed that there was a reduction of drag coefficient of the downstream model, but no change in a drag coefficient of the downstream grooved case in the range of Reynolds number in this study.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.2
• /
• pp.49-56
• /
• 2013

In this paper, used by the boundary layer wind tunnel test, have conducted a series of wind tunnel experiments, i.e. test the mean velocity profile regarding the surface roughness, turbulence intensity and power spectrum measured by augmentation device. After that, to provide data relevant for the preliminary design step of tall building hazard fluctuating wind loads may be obtained fluctuating pressure coefficients, fluctuating pressure spectrum, autocorrelation coefficients by the boundary layer wind tunnel test. From the results of experiments, this study can be obtained conclusions as follows. 1. We know the fact that the mean velocity profile and the turbulence intensity are well fitted natural wind flow in the boundary layer wind tunnel. 2. The satisfactory agreement of velocity spectrum can be obtained from the compare of fluctuating power spectrum and Von Karman spectrum. 3. We know the fact that the fluctuating pressure spectrums distributed peak at 0.01 Hz-0.1 Hz in the windward surfaces and at 0.1 Hz in the leeward surfaces. 4. We know the fact that the autocorrelation coefficients distributed stationary random processes with application time of hazard fluctuating wind loads.

• Journal of Korea Water Resources Association
• /
• v.48 no.1
• /
• pp.37-44
• /
• 2015

A Bayesian nonstationary probability rainfall estimation model using the Grid method is developed. A hierarchical Bayesian framework is consisted with prior and hyper-prior distributions associated with parameters of the Gumbel distribution which is selected for rainfall extreme data. In this study, the Grid method is adopted instead of the Matropolis Hastings algorithm for random number generation since it has advantage that it can provide a thorough sampling of parameter space. This method is good for situations where the best-fit parameter values are not easily inferred a priori, and where there is a high probability of false minima. The developed model was applied to estimated target year probability rainfall using hourly rainfall data of Seoul station from 1973 to 2012. Results demonstrated that the target year estimate using nonstationary assumption is about 5~8% larger than the estimate using stationary assumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5233-5241
• /
• 2014

This study analyzed the system level performance of the Mobile WiMAX-based TICN, and the effects of the use of BS-OTM in terms of the throughput of individual users as well as the overall system, assuming that other stationary BSs are distributed randomly. When BS-OTM is used, the CINRs decrease due to the additional interference from the BS-OTM from the perspective of SSs that are served by the same BS as when OTM BS is not used. On the other hand, from the perspective of SSs that had low CINRs, the CINRs increase significantly due to the new service from BS-OTM. Considering both effects, the cell throughput can be increased using BS-OTM. The CINR distribution and throughput of the overall system, changing the carrier frequency, position and velocity of the BS-OTM were also evaluated.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.5
• /
• pp.19-32
• /
• 2018

This study focuses on an M/M/1 queue with an attached continuous-type inventory. The customers arrive into the system according to the Poisson process, and are served in their arrival order; i.e., first-come-first-served. The service times are assumed to be independent and identically distributed exponential random variable. At a service completion epoch, the customer consumes a random amount of inventory. The inventory is controlled by the traditional (s, S)-inventory policy with a generally distributed lead time. A customer that arrives during a stock-out period assumed to be lost. For the number of customers and the inventory size, we derive a product-form stationary joint probability distribution and provide some numerical examples. Besides, an operational strategy for the inventory that minimizes the long-term cost will also be discussed.

• Journal of Environmental Science International
• /
• v.11 no.2
• /
• pp.111-120
• /
• 2002

Asian dust(or yellow sand) occurs mainly in spring and occasionally in winter in east Asia, when the weather conditions are under an upper trough/cut-off low and surface high/low pressure system during blocking episode days associated with the stationary patterns of the upper level jet stream. The transport mechanism for Asian dust during the blocking episode days in spring 2001 was analyzed using the TOMS aerosol index and meteorological mesoscale model 5(MM5). Based on the E vector, an extension of an Eliassen-Palm flux, the blocking episode days were found to be associated with the development of an upper cut-off low and surface cyclones. Concurrently, the occurrence of dust storms was also determined by strong cold advection at the rear of a jet streak, which exhibited a maximum wind speed within the upper jet stream. As such, the transport mechanism for Asian dust from China was due to advection of the isentropic potential vorticity(IPV) and isentropic surfaces associated with tropopause folding. The transport heights for Asian dust during the blocking episode days were found to be associated with the distribution of the isentropes below the IPV At the same time, lee waves propagated by topography affected the downward motion and blocking of Asian dust in China. The Asian dust transported from the dust source regions was deposited by fallout and rain-out with a reinforcing frontogenesis within a surface cyclone, as determined from satellite images using TOMS and GMS5. Accordingly, these results emphasize the importance of forecasting jet streaks, the IPV, and isentropes with geopotential heights in east Asia.