• 한국콘텐츠학회논문지
• /
• 제9권1호
• /
• pp.30-44
• /
• 2009

본 논문에서는 이동 피어의 콘텐츠 탐색을 효율적으로 지원할 수 있는 이동 P2P 구조를 제안한다. 제안하는 이동 P2P 구조는 이동 피어의 탐색 비용을 감소시키기 위해 이동 피어, 이동 슈퍼 피어, 고정 슈퍼 피어로 구성된 3계층 구조이다. 이동 피어가 콘텐츠 탐색을 수행하기 위해서는 통신 가능한 피어로부터 콘텐츠를 찾고 질의영역 확장을 위해 이동 슈퍼 피어, 고정 슈퍼 피어를 이용한 계층적 콘텐츠 탐색을 수행한다. 계층적 콘텐츠 탐색, 피어 이동성에 따른 서비스 연속성을 보장하기 위해 이동 피어의 가입/탈퇴 과정은 이동성을 지원하는 메시지 구조에 의해 명시적으로 상위 피어에 저장한다. 실험 평가 결과 제안하는 구조는 기존의 2계층 구조 보다 콘텐츠 탐색 속도가 약 32% 향상되었고 고정 슈퍼 피어로 전송되는 메시지를 감소시켜 고정 슈퍼 피어 탐색 부하를 약 25% 감소시켰다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.407-413
• /
• 2008

This paper investigates the dynamics of a HDD spindle system due to the change of FDBs. Flying height of the HDD spindle system is determined through the static analysis of the FDBs, and the stiffness and damping coefficients are calculated through the dynamic analysis of the FDBs. Free vibration characteristics and shock response of the HDD spindle system are analyzed by using the finite element method and the mode superposition method. Experimental modal test is also performed to verify the accuracy of the proposed method. This research shows that the stiffness coefficients of journal heating mostly affect the rocking frequencies because their magnitude are within the range of the stiffness of supporting structure. It also shows that the damping coefficients of thrust bearing mostly affect the axial frequency because the stiffness of thrust bearing is much smaller that that of supporting structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.571-577
• /
• 2003

This research proposes a finite element method to determine the natural vibration characteristics of the spinning disk-spindle system in a HDD including the flexibility of supporting structure. Finite element equations of each substructure are derived with the introduction of consistent variables to satisfy the geometric compatibility at the internal boundaries. The natural frequencies and modes from the global asymmetric matrix equations of motion are determined by using the implicit restarted Arnoldi iteration method. The validity of the proposed method is verified by the experimental modal testing. It also shows that the flexibility of base plate plays an important role to determine the natural frequencies of the spinning disk-spindle system in a HDD.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.87-91
• /
• 2004

High aged society is rapidly progressing in Japan. The rate of aged person more than 65 years old in the population are estimated 25 % in 2017 and rate of younger population will be decreased at same time. As a result, it is estimated that the human resources that is looking after or supporting for the aged person will be drained in Japan. In the other hand, the society has to provide high quality of life in order to be improved living environment for aged person. To decrease the share of nursing and caring for the aged person, it is required that new supporting systems for aged person have to build up as soon as possible. But it is required that various kind of measurement for posture and movement in activities with a simple and single detector for the aged person. The measurement instrument has to be lightweight and simple structure. The results give us a simple measurement method are classified that the posture of sitting down, lying down in stationary statuses and walking, running and going to up and down on the stairs in moving statuses. The detected data will plane to transmit to wireless mobile system to the host computer.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.251-258
• /
• 2005

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings (HDB) in an HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Reynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigen value problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.572-578
• /
• 2003

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• 신재생에너지
• /
• 제2권4호
• /
• pp.64-69
• /
• 2006

There is a worldwide interest in the development and commercialization of polymer electrolyte membrane fuel cells [PEMFCs] for vehicular and stationary applications. One of the major objectives is the reduction of loaded electrode materials, which is comprise of the Pt-based noble metals. In this paper, a novel chemical strategy is described for the preparation and characterization of carbon-supported and surface-alloys, which were prepared by using a successive reduction process. After preparing Au colloid nanoparticles, the supporting of Au colloid nanoparticles occurred spontaneously in the carbon black-dispersed aqueous solution. Then nano-scaled active materials were formed on the surface of carbon-supported Au nanoparticles. The structural and electrochemical analyses indicate that the active materials were deposited on the surface of Au nanoparticles selectively and that an alloying process occurred during the successive reducing process. The carbon-supported & surface-alloys showed the higher electrocatalytic activity than those of the particle-alloys and commercial one [Johnson-Matthey] for the reaction of methanol and formic acid oxidation. The increased electrocatalytic activity might be attributed to the effective surface structure of surface-alloys, which have a high utilization of active materials for the surface reaction of electrode.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권3호
• /
• pp.316-320
• /
• 2008

무선 센서 망에서 소스가 그리드 구조(grid structure)를 생성하는 접근 방법은 이벤트의 이동에 의해 소스가 연속적으로 변하거나 소스가 많아질 경우 심각한 에너지 손실이 일어난다. 반면, 싱크 기반(sink-initiated)의 질의메시지를 사용하는 접근 방법에서는 망의 모든 센서 노드들에게 질의메시지가 플러딩되기 때문에 이벤트를 인식하지 않은 센서 노드들에게도 질의메시지가 플러딩되는 문제가 있다. 또한, 그들 접근 방법들은 싱크를 대신하는 중간자로서 고정 대리자(agent)를 사용하여 싱크에게 정보를 전달하는 방법을 사용하기 때문에 모든 소스에서 발생한 데이타가 항상 해당 대리자를 거치게 되고, 따라서 고정 대리자와 이동 싱크 간의 루트(route)에 혼잡도가 급격히 증가하게 된다. 본 논문에서는 이 문제들을 해결하기 위하여 싱크와 소스의 질의메시지를 관리하여 이벤트가 발생한 소스에서 이동 싱크까지의 루트를 형성하여, 직접 데이타를 전달하는 프로토콜을 제안한다. 제안 프로토콜은 소스와 싱크간의 연결을 위하여 위치정보 기반 라우팅(geographic routing)과 위치정보 관리자를 사용한다. 마지막으로 컴퓨터 시뮬레이션을 통해 제안 프로토콜의 에너지 효율성을 입증한다.