• 한국항공우주학회지
• /
• 제36권7호
• /
• pp.666-673
• /
• 2008

정확도 높은 위성전파항법 시스템의 구축을 위해서는 지상국과 우주궤도 상의 각 전파항법 위성 간의 데이터 통신을 통하여 각 위성 시스템의 상태 모니터링, 궤도 보정, 상호 무결성 판정 작업 등이 필수적이다. 제한된 소수의 지상국 안테나로 다수의 위성을 추적해야 하기 때문에 지상국 안테나의 효율적인 사용을 위한 방위각과 앙각의 시간계획이 필요하다. 중궤도를 돌고 있는 전파항법 위성은 일정한 궤도를 공전하고 있지만 지구가 자전하고 있는 관계로 지구상을 동일한 궤적으로 통과하지 않기 때문에 매 순간 지상국 안테나의 추적 경로계획을 새롭게 짜야한다. 본 연구에서는 다중위성 추적을 위한 지상국 안테나의 최적 방위각 및 앙각 스케쥴을 찾기 위해서 강화학습 기법 중의 하나인 Q 학습 기법과 유전자 기법을 이용하여 최적 알고리즘을 개발하고, 컴퓨터 시뮬레이션을 통하여 알고리즘의 최적성을 검증하는 연구를 수행하였다.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3236-3246
• /
• 2021

Lessons learned from the Fukushima Daiichi nuclear power plant accident directed that multiple failures should be considered more seriously rather than single failure in the licensing bases and safety cases because attempts to take accident management measures could be unsuccessful under the high radiation environment aggravated by multiple failures, such as complete loss of electric power, uncontrollable loss of coolant inventory, failure of essential safety function recovery. In the case of the complete loss of electric power called station blackout (SBO), if there is no mitigation action for recovering safety functions, the reactor core would be overheated, and severe fuel damage could be anticipated due to the failure of the active heat sink. In such a transient condition at CANDU-6 plants, the seal failure of the primary heat transport (PHT) pumps can facilitate a consequent increase in the fuel sheath temperature and eventually lead to degradation of the fuel integrity. Therefore, it is necessary to specify the regulatory guidelines for multiple failures on a licensing basis so that licensees should prepare the accident management measures to prevent or mitigate accident conditions. In order to explore the efficiency of implementing accident management strategies for CANDU-6 plants, this study proposed a realistic accident analysis approach on the SBO transient with multiple-failure sequences such as seal failure of PHT pumps without operator's recovery actions. In this regard, a comparative study for two PHT pump seal failure modes with and without coolant seal leakage was conducted using a best-estimate code to precisely investigate the behaviors of thermal-hydraulic parameters during transient conditions. Moreover, a sensitivity analysis for different PHT pump seal leakage rates was also carried out to examine the effect of leakage rate on the system responses. This study is expected to provide the technical bases to the accident management strategy for unmitigated transient conditions with multiple failures.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.23-35
• /
• 2023

Korea Augmentation Satellite System (KASS) is a satellite-based augmentation system (SBAS) that provides approach procedure with vertical guidance-I (APV-I) level corrections and integrity information to Korea territory. KASS is used to monitor navigation performance in real-time, and this paper introduces the design, implementation, and verification process of mission monitoring (MIMO) in KASS. MIMO was developed in compliance with the Minimum Operational Performance Standards of the Radio Technical Commission for Aeronautics for Global Positioning System (GPS)/SBAS airborne equipment. In this study, the MIMO system was verified by comparing and analyzing the outputs of reference tools. Additionally, the definition and derivation method of accuracy, integrity, continuity, and availability subject to MIMO were examined. The internal and external interfaces and functions were then designed and implemented. The GPS data pre-processing was minimized during the implementation to evaluate the navigation performance experienced by general users. Subsequently, tests and verification methods were used to compare the obtained results based on reference tools. The test was performed using the KASS dataset, which included GPS and SBAS observations. The decoding performance of the developed MIMO was identical to that of the reference tools. Additionally, the navigation performance was verified by confirming the similarity in trends. As MIMO is a component of KASS used for real-time monitoring of the navigation performance of SBAS, the KASS operator can identify whether an abnormality exists in the navigation performance in real-time. Moreover, the preliminary identification of the abnormal point during the post-processing of data can improve operational efficiency.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1414-1422
• /
• 2017

Remote response technology has advanced to the extent that a robot system, if properly designed and deployed, may greatly help respond to beyond-design-basis accidents at nuclear power plants. Particularly in the aftermath of the Fukushima accident, there is increasing interest in developing disaster robots that can be deployed in lieu of a human operator to the field to perform mitigating actions in the harsh environment caused by extreme natural hazards. The nuclear robotics team of the Korea Atomic Energy Research Institute (KAERI) is also endeavoring to construct disaster robots and, first of all, is interested in finding out to what extent safety benefits can be achieved by such a disaster robotic system. This paper discusses a new approach based on the probabilistic risk assessment (PRA) technique, which can be used to quantify safety benefits associated with disaster robots, along with a case study for seismic-induced station blackout condition. The results indicate that to avoid core damage in this special case a robot system with reliability > 0.65 is needed because otherwise core damage is inevitable. Therefore, considerable efforts are needed to improve the reliability of disaster robots, because without assurance of high reliability, remote response techniques will not be practically used.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.123-130
• /
• 2002

본 논문은 사고관리방안 수행에 있어서 발생되는 인적오류의 정량적 평가방법을 개발하여 공동범람 사고관리방안의 예제문제에 적용한 연구결과를 기술하고있다. PSA에서 사용되었던 기존의 인간오류평가 방법론인 THERP, HCR, SLIM-MAUD 방법의 특징을 검토하여 장단점을 기술하였다. 본 연구에서 제시하는 인간오류평가 방법론은 신뢰도물리모델을 이용하는 새로운 HRA 분석방법이다. 불확실성 분석을 위하여 MAAP 코드와 LHS 코드가 사용되었다. 본 연구를 통하여 제안하는 방법은 매우 유연하여 중대사고관리방안과 관련한 다양한 인간오류행위에 대한 평가에 사용될 수 있음을 보여주었다.

• Journal of Information Processing Systems
• /
• 제5권4호
• /
• pp.207-220
• /
• 2009

A large number of phone calls and data services will take place in indoor environments. In Long Term Evolution (LTE), femtocell, as a home base station for indoor coverage extension and wideband data service, has recently gained significant interests from operators and consumers. Since femtocell is frequently turned on and off by a personal owner, not by a network operator, one of the key issues is that femtocell should be identified autonomously without system information to support handover from macrocell to femtocell. In this paper, we propose a dynamic reservation scheme of Physical Cell Identities (PCI) for 3GPP LTE femtocell systems. There are several reserving types, and each type reserves a different number of PCIs for femtocell. The transition among the types depends on the deployed number of femtocells, or the number of PCI confusion events. Accordingly, flexible use of PCIs can decrease PCI confusion. This reduces searching time for femtocell, and it is helpful for the quick handover from macrocell to femtocell. Simulation results show that our proposed scheme reduces average delay for identifying detected cells, and increases network capacity within equal delay constraints.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.452-455
• /
• 2004

MSC (Multi-Spectral Camera) system is a remote sensing instrument to obtain high resolution ground image. EOS (Electro-Optic System) for MSC mainly consists of PMA (Primary Mirror Assembly), SMA (Secondary Mirror Assembly), HSTS (High Stability Telescope Structure) and DFPA (Detector Focal Plane Assembly). High performance of EOS makes it possible for MSC system to provide high resolution and high quality ground images. Temperature of the EOS needs to be controlled to be in a specific range in order not to have any thermal distortion which can cause performance degradation. It is controlled by full redundant CPU based electronics. The validity of thermistor readings can be checked because a few thermistors are installed on each control point on EOS. Various kinds of thermal control logics are used to prevent 'Single Point Failure'. Control logic has a few set of database in order not to be corrupted by SEU (Single Event Upset). Even though the thermal control logic is working automatically, it can also be monitored and controlled by ground-station operator. In this paper, various ways of thermal control logic for EOS in MSC will be presented, which include thermal control mode and logic, redundancy design and status monitoring and reporting scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.110-112
• /
• 1999

Recently the substation automation is actively researched at each country. Since the substation automation is an integrated system that consist of electrical, electronic and computer technologies, performance evaluation is very important to inspect the developed system's applicable possibility for real power system. Most studies are verified using computer simulation, because it is hard to apply them to real power systems. Therefore development of a substation simulator is necessary for the performance evaluation of many application systems such as operator aid system. This paper introduces a substation simulator. An intelligent fault diagnosis and restorative control expert system is also introduced UDP/IP is applied as a protocol for data transport between expert system and SC(station computer). As to the Graphic User Interface, C++ Language and Visual Basic is used in the Windows NT operating system together with four Pentium II systems.

• 한국항공우주학회지
• /
• 제31권10호
• /
• pp.105-111
• /
• 2003

위성체 정렬은 위성체 조립 및 시험과정에서 중요한 부분이다. 인공위성이 우주궤도상에서 성공적인 임무를 수행하기 위해서는 자세제어 및 탑재체용 부분품들에 대하여 측정허용오차 $0.1^{\circ}{\sim}0.7^{\circ}$의 정밀하고 정확한 측정이 요구되며 정렬된 상태에서의 위성체 좌표계의 정확한 방향좌표를 측정하여 지상에 위치한 위성체 관제부에서 위성체의 자세제어 등에 사용하도록 제공하게 된다. 본 논문에서는 자동시준에 의한 위성체 정렬 측정 이론에 대하여 기술하고 데오도라이트를 사용하여 위성체 정렬을 측정할 수 있는 측정방법 및 그 측정 결과에 대하여 고찰해 보고자 한다.

• 전기학회논문지P
• /
• 제53권2호
• /
• pp.89-93
• /
• 2004

Supervisory Control And Data Acquisition(SCADA) of electric power system refersto the system that displays, monitors and executes the control commands for remote electric power system. KNR's existing electric power control system is built on UNIX platform such that it costs more for system construction, and people with UNIX skills can only be an operator who controls and manages the system. Moreover, since the system is mainly operated in local offices, system operators must communicate with local operators to investigate the cause of the accident and react the accident every time the system fails. As a new integrated SCADA system is constructed, establishment of small-unit electric power control system, that alters local electric power control system in designated stations, is required. In this study, the electric power control system, which accommodates all functions of UNIX-based SCADA system and facilitates operation and even maintenance for local operators, is to be developed. In order to develop small-unit electric power control system, the industrial automation program, "Cimon", is used. The small-unit electric power control system that accommodatesRTU and newly installed electronic switchboard is being developed and tested at Chulam station of KNR.