• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1559-1565
• /
• 2004

Railway system is consisted of various resources such as rail-line, signal, and railcar. It is necessary to efficiently utilize these limited and expensive resources as much as possible up to given line capacity. So far, we treat the line capacity as the criteria for evaluating investment alternatives or for restricting train frequencies, and this criteria is calculated statical and experimental numerical formula. But, line capacity has special attribute that changes dynamically according to operational conditions, so there is a need of new line capacity estimation system. In this paper, we present an improved systematic line capacity model. The proposed model has three main components ; TPS(tain performance simulator), PES (parameter evaluation simulator), LCS(line capacity simulator). The concept of each sub-component is described, including the evaluation method of capacity parameters. And capacity parameter evaluation and estimation results using sample line section data are presented.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.197-203
• /
• 2004

Railway system is consisted of various resources such as rail-line, signal, and railcar. It is necessary to efficiently utilize these limited and expensive resources as much as possible up to given line capacity. So far, we treat the line capacity as the criteria for evaluating investment alternatives or for restricting train frequencies, and this criteria is calculated statical and experimental numerical formula. But, line capacity has special attribute that changes dynamically according to operational conditions, so there is a need of new line capacity estimation system. In this paper, we present an improved systematic line capacity model. The proposed model has three main components ; TPS(lain performance simulator), PES(parameter evaluation simulator), LCS(line capacity simulator). The concept of each sub-component is described, including the evaluation method of capacity parameters. And capacity parameter evaluation and estimation results using sample line section data are presented.

• Water for future
• /
• v.14 no.2
• /
• pp.71-79
• /
• 1981

This study is established of simulation models form the stochastic and statistic analysis of monthly rainfall and monthly runoff on south Han river. The time series simulation of monthly runoff is introduced with a linear stochastic model for simulating synthetic monthly runoff data. And, time series model of monthly pricipitation and monthly runoff is introduced to be a pure random time series with known statical parameter, which is characterized by an exponential recession curve with one parameter, and is develope expressing the statistical parameter for length of carryover.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.3
• /
• pp.105-121
• /
• 1994

In this paper, we proposed the two-parameter model for predicting the residual strength in CFRP laminated composites subjected to high velocity impact and developed and formulated it based upon Cparino's by using the ratio of impact and the normalized residual strength. Critical indentation was obtained by the statical indentation tests. Impact tests were carried out through air-gun type impact equipment with the velocities varied 30-100m/sec. Projectiles were steel balls with 5 and 7mm in diameter. Test material was carbon/epoxy. The specimens were composed of [ .+-. 45 .deg. /0 .deg. /90 .deg. ]$\_$2/ and [ .+-. 45 .deg. ]$\_$4/stacking sequences and had 0.75$\^$T/*0.26$\^$W/*100$\^$L/(mm) dimension. Results from the proposed model were in good agreement with the test data. And failure mechanism due to high velocity impact is given here to examine the initation and deveolpment of damage by fractography and ultrasonic image system. The effects of the 0 .deg. -direction ply position and the amount to damage area on the residual strength are considered here.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.53-63
• /
• 2010

Recently, various monitoring systems are implemented actively by using wireless sensor networks(WSN). When implementing WSN-based monitoring system, there are three important issues to consider. At First, we need to consider a sensor node failure detection method to support the ongoing monitoring. Secondly, because sensor nodes use limited battery power, we need an efficient data filtering method to reduce energy consumption. At Last, a reducing processing overhead method is necessary. The existing Kalman filtering scheme has good performance on data filtering, but it causes too much processing overhead to estimate sensed data. To solve these problems, we, in this paper, propose a new data filtering scheme based on data statical analysis. First, the proposed scheme periodically aggregates node survival massages to support a node failure detection. Secondly, to reduce energy consumption, it sends the sample data with a node survival massage and do data filtering based on those messages. Finally, it analyzes the sample data to estimate filtering range in a server. As a result, each sensor node can use only simple compare operation for filtering data. In addition, we show from our performance analysis that the proposed scheme outperforms the Kalman filtering scheme in terms of the number of sending messages.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1161-1168
• /
• 2005

As a result of vehicle maintenance of rocker arm shaft for 4-cylinder SOHC engine, failure analysis of rocker arm shaft is needed. Because more than $30\%$ of vehicles investigated have been fractured. Failure analysis is classified into an naked eyes, microscope and X-ray fractography etc. It can predict applied load as well as load type. These methods are applicable to components with simple boundary condition but aren't applicable to components with complex boundary condition. The existing fractography don't catch hold of failure boundary condition quantitatively. Especially, in case that the components isn't fractured at same position. We must determine the most dangerous failure boundary condition to evaluate their operation mechanism. The effect of various factors on response should be estimated to solve this statical problem. This study presents the most dangerous failure boundary condition of rocker arm shaft using orthogonal array and ANOVA in order to assure its robustness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1500-1509
• /
• 2007

The purpose of this study was to observe lifestyle of female consumers aged 15-25. Also it was to measure brand awareness, to determine purchase criteria in fashion magazine, and to determine promotion preferences according to lifestyle segmentation variables. We distributed 600 questionnaires and 475 reliable questionnaires were used for a statical analysis. Data analyses were conducted with SPSS program on the frequency mean value, Chi-square test, Cluster analysis, and Factor analysis. We classified four clusters such as individual style seekers, trend seekers, promotion/good appearance seekers, and low fashion interest group, based on lifestyle variables. There was a significant difference in brand awareness in Vogue Girl, Cosmo Girl, Elle, Figaro, Ecole magazine among four clusters. There was a significant difference in such purchase criteria as favorable cover models, good "burok" which is a magazine supplement, brand names, and price among four clusters. In addition, the results of ANOVA represent that there was a significant difference in preferred types of promotion such as discount price, clothing gifts, fashion accessary gifts and hair tool gifts. However, the first ranked preferred one was a cosmetic gift in all the magazines, which favored more by trend seeker group.

• Journal of Haehwa Medicine
• /
• v.21 no.1
• /
• pp.65-78
• /
• 2012

Found on the 19th century, GuiLinGuBon can have more several unique features than the other extinguish editions. GuiLinGuBon has been Receiving attention, because it contains both and 's contents, as well as it consistt of 16 books to the same as the preperce, and then it analyzed the chapter on Wending Disease(溫病) and Liuyin Disease(六淫病) in detail which is not written in current book, and gives several clues to solve many questions that caused the controversy. This thesis is the study the GuiLinGuBon on the overall composition and the prescriptions for the overall analysis to book configuration, herbs configuration, 8 method(八法) according to the prescribed frequency, SinNongBonChoGyong(神农本草经) according to the herbs of the SamPum(三品) classification and statistical processing GuiLinGuBon the specific features were analyzed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.220-225
• /
• 2013

Accidents between ships occur frequently at the traffic congestion area. Once a maritime accidents occur, it is likely to end up with critical damaged accidents. This paper develop a simulator for assessing quantitative risk based on statical maritime traffic data and realtime traffic distribution. Ship's passage risk assessment simulator consist of import of division of passage data, traffic distribution analysis and passage risk assessment analysis. Maritime traffic data of WANDO waterway apply to simulator for calculation of quantitative risk rate of waterway.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.2
• /
• pp.131-140
• /
• 2012

This study was to investigate the relationship between the distance and projection factors, angle factors of javelin in women's javelin throwing. The data were collected in the 2011 National Sports Festivals for 11 players. Three-Dimensional motion analysis using a system of 4 video cameras at a sampling frequency of 60 fields/s was performed for this study. The factors of release conditions calculated using Matlab 2009a program. The statical analysis on the records(n=42) included mean and standard deviation of the mean(SD), Pearson's product moment correlation coefficient(SPSS Version 16.0 for Windows). There was a statistically significant positive relationship between the records and release velocity(r=.866, p<.01), height(r=.433, p<.01) and height rate(r=.340, p<.05). The attitude angle, release angle, and attack angle showed not a statistically significant relationship between the records. The medial-lateral tilt angle of javelin showed not a statistically significant relationship between the records, but the yaw angle of javelin(r=.549, p<.01) showed a statistically significant positive relationship between the records.