• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.1-19
• /
• 2002

The purpose of this study is to identify influence that eye movement have an effect on postural control and balance performance by plegia side of the impaired patients of central nervous system. Subjects are patients with the impairment of central nervous system and experimental and control groups are forty people and thirty people seperatively, Total subjects were selected to seventy persons, but twelve persons of experimental group quit during the experimental periods and eight persons of control group did not measure after exercise. Therefore, twenty eight persons of experimental group and twenty two persons of control group were selected in this study and experimental group peformed eye movement for eight weeks according to the exercise program of this study. The measurement of dependent variable is right static balance, left static balance, bilateral static balance, and bilateral dynamic balance before exercise and after eighth week of exercise, examiner again measured and analyzed the results. The results were as follows: 1. As the result of comparing balance performance ability after test of the experimental and control group with right hemiplegia and control group, all of static balance performance ability of right side (p < 0.01), static balance performance ability of left side (p < 0.01), static balance performance ability of bilateral side(p < 0.01), dynamic balance performance ability of bilateral side(p < 0.05) of experimental group were statistically greater improved than those of the control group. 2. As the result of comparing balance performance ability after test of the experimental and control group with left hemiplegia and control group, all of static balance performance ability of right side (p < 0.01), static balance performance ability of left side (p < 0.01), static balance performance ability of bilateral side(p < 0.05), dynamic balance performance ability of bilateral side(p < 0.05) of experimental group were statistically greater improved than those of the control group.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.496-501
• /
• 2016

This paper presents a design method of non-parallel distributed compensation (non-PDC) static output feedback controller for continuous- and discrete-time T-S fuzzy systems. The existence condition of static output feedback control law is represented in terms of linear matrix inequalities (LMIs). The proposed sufficient stabilizing condition does not need any transformation matrices and equality constraints and is less conservative than the previous result of [21].

• International Journal of Control, Automation, and Systems
• /
• v.5 no.3
• /
• pp.349-354
• /
• 2007

This paper considers the problem of designing static output feedback controllers for nonlinear systems represented by Takagi-Sugeno (T-S) fuzzy models. Based on linear matrix inequality technique, a new method is developed for designing fuzzy stabilizing controllers via static output feedback. Furthermore, the result is also extended to $H_{\infty}$ control. Examples are given to illustrate the effectiveness of the proposed methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.560-564
• /
• 2015

This paper presents a design method of a static output feedback controller for continuous T-S fuzzy systems via parallel distributed compensation (PDC). The existence condition of a set of static output feedback gains is represented in terms of linear matrix inequalities (LMIs). The sufficient condition presented here does not need any transformation matrices and equality constraints and is less conservative than the previous results seen in [20].

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1435-1437
• /
• 2003

In this paper, we proposed static output feedback model predictive control for Wiener models. We adopted polytopic uncertainty description of Wiener Model Predictive Control (WMPC) algorithms for considering output nonlinearities. Robust stability conditions have been presented under which the closed loop stability of static output feedback MPC is guaranteed. The proposed control law is determined from the static output feedback WMPC based on the current estimated state with explicit satisfaction of input constraints.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.2
• /
• pp.180-185
• /
• 2014

DC motor is a representative electric motor commonly utilized in various motion control fields. However, DC motor-based motion control systems suffer from degradation of position precision due to nonlinear static friction. In order to enhance control precision, friction model-based compensators have been introduced in previous researches, where friction models are identified and counter inputs are added to control inputs for cancelling out the identified friction forces. In this paper, a static friction compensator is proposed without use of a friction model. The proposed compensation algorithm utilizes internal state manipulation to generate compensation pulses, and related parameters are easily tuned experimentally. The proposed friction compensator is applied to a DC motor-based motion control system, and results are presented in comparison with those without a friction compensator.

• Journal of International Academy of Physical Therapy Research
• /
• v.12 no.2
• /
• pp.2354-2358
• /
• 2021

Background: Stroke is a neurological disorder characterized by an impaired static balance. A change in poor posture after stroke may worsen static balance. The balance control through an upright posture may include kinesiology taping of the middle back. Objectives: To investigated the effect of kinesiology taping of middle back on static balance in patients with stroke. Design: A randomized controlled trial. Methods: A total of 10 patients with stroke were divided into two groups. The experimental and control groups received kinesiology taping and placebo taping of the middle back, respectively. After 24 h, static balance (i.e., sway area and path length) was measured in closed eyes condition. Results: The experimental group (kinesiology taping group) showed a significant decrease in sway area and path length after the intervention. In addition, kinesiology taping group showed a significant decrease in sway area and path length compared to the control group. Conclusion: Kinesiology taping of the middle back can improve static balance in stroke patients.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.10
• /
• pp.509-515
• /
• 2000

This paper addresses a damping control strategy of Static Synchronous Series Compensator(SSSC) and analysis model for stability study. The effect of injected voltage source generated by SSSC is modelled as equivalent load. This model is thought to be reasonable for the stability study because the dynamics of SSSC is very fast compared with that of power system. Damping controller of SSSC is based on Transient Energy Function method. The proposed control strategy is insensitive to the operating conditions like power flow level because control law depends on the phase angles. The proposed analysis model and control strategy was confirmed by WSCC 9 bus system and two area system. Especially, the robustness of proposed control strategy is demonstrated with respect to multiple operating conditions in two area system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.398-402
• /
• 1996

This paper addresses the design and the gait control of quadruped walking robot. First, we concern the mechanical and electronical(control system) hardware of walking robot, and the second is the results of experiments. The walking robot is the most suitable form to substitute fot human being. So walking robot is worthy of research. The quadruped walking robot and control system is the simplest type of walking robot, therefore we designed a small seale robot for realization of static gait. The robot is designed commpactly and its legs are constructed parallel link type and able to move freely in space. Control system consists of one upper level controller and four lower level controllers. The upper level controller plans the walking path and commands the low level controllers to follow the planned path. The main function of low level cotrollers is control of motors. Total number of motors is twealve and they operate four legs. And robot is ordered to walk and realize static wave gait.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.89-92
• /
• 1996

This paper describes a detailed simulation model of the static condenser (STATCON) to analyze the dynamic interaction with the ac transmission line. The static condenser was represented by a 12-pulse voltage-source inverter sharing an energy storage dc capacitor. The voltage-source inverter consists of two 6-pulse bridges modeled with ideal gate-turn-off switches. The control system for the static condenser was designed through a mathematical model deduced from the equivalent circuit. Simulation results show that the conceived model is very effective to analyze the dynamic interaction between the static condenser and the ac transmission system.