• 한국산학경영학회:학술대회논문집
• /
• 한국산학경영학회 2005년도 추계학술발표대회 발표논문집
• /
• pp.1-9
• /
• 2005

Job search research has been criticized for failing to study the dynamics and change of the job search process. A lot of previous researches have used cross-sectional designs and treated job search as a static process. As a result, job search research has failed to examine how job seekers' behaviors change during the course of their search. This paper examined changes In job search behaviors(preparatory and active job search behavior, and job search intensity) and the effects of individual difference variables(self-esteem, self-efficacy, extroversion, agreeableness, conscientiousness, openness) on job search behaviors. Data were gathered from 404 university students who had not found employment at the time of beginning of second semester The results of t-test pairs indicated that job seeking students increased their preparatory job search behavior and active job search behavior, but didn't job search intensity. The results of multiple regression showed that self-efficacy had strong relationship with preparatory and active job search behavior, and job search intensity, but self-esteem had not any relationship with them. Among big-5 personality, extroversion had relationship with active job search behavior and job search intensity, and agreeableness only with job search intensity.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.1039-1047
• /
• 1999

It is necessary to evaluate the fatigue behavior of rail steel under the multi-axial stress state to assure the railway vehicle's safety. For this purpose, the stress analysis to investigate the crack initiation criteria, static failure and fatigue behavior under mixed-mode are performed. The stress analysis results show that the initiation of the transverse fissure depends on the maximum shear stress below the surface. For the mixed mode, the fatigue crack growth behavior which is represented by the projection crack length and comparative S.I.F, ${\Delta}K_v$, shows the more conservative results. Also, its rate is lower than that of the case of the mode I, and this difference decreases with increasing the stress ratio, R.

• 지식경영연구
• /
• 제15권4호
• /
• pp.57-78
• /
• 2014

Since team performance has become one of the core factors for companies' success, companies are putting every effort to raise team productivity. In this vein, the purpose of this study was to examine the influence of team learning behavior upon team dynamic capabilities, team effectiveness, and to verify the mediating effect of team dynamic capabilities in corporations. 312 employees were randomly selected to participate in an questionnaire survey. The result has shown that the static correlation exists between team learning behavior, team dynamic capabilities, and team effectiveness. Team dynamic capabilities mediated the relationship between team learning behavior and team effectiveness. Based on the findings, the study implies that learning behaviors among team members should be supported in order to improve its outcome, and HR representatives must help to develop dynamic capabilities.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.35.1-40
• /
• 2001

This study is on the behavior analysis which can define and verify a system requirement through a behavior diagram for High speed rail system. The model considered in this study is limited to the preconditioning control of the control system specification for HSRS. To build an executable model, requirements should be decomposed first into leaf node requirements. The behavior model is composed of input, output, and functions which are linked with leaf node requirements. It is important that a single requirement must specify a single Auction. Using the developed executable model and the traceability between requirements and functions, this study found out a lot of static and dynamic inconsistency, missed and derived requirements. This is to develop and executable behavior model to do functional analysis and be able to verify the integrity of a specification.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.658-663
• /
• 2000

Slopping phenomena deteriorate the productivity and the stability of operation in oxygen converter process. To predict and prevent that, it needs reliable perception of the internal state of the oxygen converter chamber. Equipment was developed to measure the dynamic and static behavior of the oxygen-blowing lance 3-dimensionally and the measured signal is analyzed in relation to slopping phenomena. It was found that the behavior of the lance is strongly correlated to the change of slag foam height and the instability of molten steel behavior. So slopping phenomena can be predicted by simultaneously analyzing the measured behavior of the lance and the control factors such as the flow rate of oxygen and the height of lance.

• 항공우주기술
• /
• 제13권1호
• /
• pp.20-26
• /
• 2014

본 논문에서는 충격하중과 잔류 에너지 등의 충격거동에 대한 영향을 확인하기 위하여 항복응력, 탄젠트 강성계수 및 파단 변형률을 변화시켰다. 그리고 섬유금속 적층판의 좌굴거동을 수치해석을 이용하여 수행하였다. 좌굴 성능을 비교하기 위하여 섬유금속 적층판과 알루미늄 판에 대해 인장 및 압축하중에 대한 여러 가지 경우의 해석을 수행하였다. 또한 정적 성능을 평가하기 위하여 박스 보 구조물의 정적해석을 수행하였다. 알루미늄 2024 박판과 유리섬유/에폭시 프리프레그로 만든 섬유금속 적층판에 대한 저속충격 해석을 수행하였다. 그리고 좌굴 및 정적해석 결과를 이용하여 섬유금속 적층판과 알루미늄의 성능을 비교하였다. 구조적 성능 비교를 위하여 동일한 무게의 알루미늄 2024 박판에 대한 해석을 수행하였다.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.17-23
• /
• 2006

Rubber materials have the nonlinear, large deformation and viscoelastic behavior. W.D. Kim et al. studied these characteristics through the static, fatigue, dynamic, aging and viscoelastic test. This paper discussed that the properties of engine mounting rubber, such as static stiffness, fatigue life and damping factor, are predicted based on CAE by using material properties acquired by the report of Kim et al. In result, the static stiffness of engine mounting rubber is predicted approximately in comparison with test value. Also, it was confirmed that the relationship of fatigue life and Green-Lagrange strain in specimen was the valid tool to predict the fatigue life of engine mounting rubber. From the results of transient viscoelastic analysis the damping factor changed rapidly at the range less than 8hz.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.78-86
• /
• 1992

The creep behaviors of 1%Cr-Mo-V and 12%Cr steam turbine rotor steels under static or cyclic load were examined at 600 and $700^{\circ}C$. The relationship between these two kinds of phenomena was studied and the experimental results were summarized as follows: 1) It is confirmed that the cyclic creep strain dependent on time is more available for creep, behavior analysis according to frequency change than that dependent on number of cycles, and the static creep, the special case of cyclic creep with stress ratio of 1 can be also more effectively analyzed by time-dependence. 2) The steady cyclic creep rate vs. the steady static creep rate, increases according to the increase of stress ratio, and this phenomena may occur on occasion of the decrease of the internal stress. 3) The initial strain affects on all the creep properties of the transient region, the steady state region and the rupture time in cyclic creep as well as static creep, and the quantitative relationships among them exist.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.588-592
• /
• 2012

This study concentrates the effect of hybridisation on the collapse mode and energy absorption for composite cylinders. The static collapse behavior of laminated(Al/CFRP/GFRP) circular-cylindrical composite shell under quasi-static axial compressive load has been investigated experimentally. Eight different hybrids of laminated(Al/CFRP/GFRP) circular-cylindrical composite shell were fabricated by autoclave. Eight types of composites were tested, namely, Al/carbon fiber/epoxy, Al/glass fiber/epoxy, Al/carbon-carbon-glass/epoxy, Al/carbon-glass-carbon/epoxy, Al/carbon-glass-glass/epoxy, Al/glass-glass-carbon/epoxy, Al/glass-carbon-glass/epoxy and Al/glass-carbon-carbon/epoxy. Collpase modes were highly dominated by the effect of hybridisation. The results also showed that the hybrid member with material sequence of Al-glass-carbon-carbon/epoxy exhibited good energy absorption capability.

• 한국터널지하공간학회 논문집
• /
• 제7권3호
• /
• pp.249-257
• /
• 2005

지하구조물의 해석 방법은 크게 해석적 또는 유사정적 해석방법과 동적해석 방법의 두 종류로 나눌 수 있다. 유사정적 해석방법은 자유지반변형을 구조물에 정적인 하중으로 적용하여 구조물의 변위를 구하는 방법으로 선형탄성해석에 기초를 두고 있다. 그러나 치진 발생시 지반과 구조물 사이의 상호작용은 비선형 거동을 하여 이를 고려한 해석이 이루어져야 한다. 본 연구에서는 유사정적 해석방법에 반복계산과정에 의하여 지반의 비선형성을 고려할 수 있는 간편해석방법을 소개하고, 이를 수치해석을 통한 동해석을 수행하여 비교 검증하였다.