• 한국안전학회지
• /
• 제13권3호
• /
• pp.11-23
• /
• 1998

In this study, collapse test of thin-walled structure is performed under axially quasi-static and impact load in collapse characteristic to develop the optimum structural member for a light-oriented automobile. Furthermore, the energy-absorbing capacity is observed according to the variety of configuration(circular, square), aspect ratio in aluminum specimen to obtain basic data for the improved member of vehicle. In both quasi-static and impact collapse test, Al circular specimens collapse, in general, with axisymmetric mode in case of thin thickness while collapse with non-axisynmetric mode according to the thickness increase. For Al rectangular specimens, they collapse with axisymmetric mode in case of thin thickness, with mixed collapse mode according to the increase of thickness. In terms of initial max. load, Al square specimen turns out the best member among specimens, and then Al square, circular and circular with large scaling ratio, respectively. In case of quasi-static compression test, the absorbed energy per unit volume and mass shows higher in Al circular specimen, and then Al square, circular with large scaling ratio, respectively, according to shape ratio the absorbed energy per unit volume and mass in case of max. impact compression load is higher than that of static load. But the absorbed energy per unit volume and mass shows that Al circular specimen is the best member. Especially, unlike max. compression loan, the absorbed energy per unit volume and mass in impact test turns out the low value.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권3호
• /
• pp.97-102
• /
• 2018

기존 PSC I형 거더는 콘크리트의 자중, 정착구 및 긴장방식 등의 영향으로 장경간화의 적용성이 불리하였다. 이를 극복하기 위하여 PSC 거더의 복부에 중공을 도입하고 다단계 긴장을 도입함으로써 50~70m 경간에 적용 가능한 중공 웨브 PSC I형 거더를 개발하고 실교량으로 시공하였다. 본 연구는 중공 웨브 PSC I형 거더교 현장에서 정적재하시험을 통하여 계측을 한 결과와 대상 구조물의 유한요소해석 결과를 바탕으로 비교, 분석하여 중공 웨브 장경간 PSC 거더교의 공용내하력과 안전성을 평가하였다. 본 교량의 정적재하시험과 수치해석 결과가 유사하게 나타났으며 중공 웨브 PSC I형 거더의 거동을 잘 모사하는 것으로 나타났다. 교량의 모든 거더는 설계 활하중 하에서 충분한 내하력을 확보하는 것으로 평가되었고 안전성을 확보하여 시공 결과의 적절성을 확인하였다.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.179-186
• /
• 2005

실내 모형실험으로 정,반복하중 재하 실험을 실시하여 하중과 침하, 지중 측방변위, 토목섬유 변위 등을 측정한 결과 지반과의 마찰과 토목섬유 인장력의 영향으로 전반적으로 지반의 변위가 줄고 지지력이 증가하였다. 또한 Mohr-coulomb 및 수정Mohr-Coulomb 모델들과 FLAC 4.0 2D을 사용하여 수치해석을 실시하였고 실내 모형 실험결과와 비교하였다. 기존식들은 토목섬유 모델링시 FLAC의 케이블 요소는 하중증가에 따른 전단강도를 증가되는 특성을 고려할수 없었기 때문에 실험 결과치와 상이하게 나타났다. 따라서 본 연구에서는 반복적인 학습으로 상재 하중의 영향을 고려한 케이블 구성요소의 적절한 식을 제시하였다.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.115-121
• /
• 2002

본 논문은 KTX-1 기본훈련기 방향타 조종계통의 정적 하중 시험을 요약한 것이다. 방향타 콘트롤 시스템 정적 하중시험은 정하중 구조 시험용 KTX-1 #004호기에 장착 상태에서 실시하였으며 사용되는 모든 부품은 실제와 동일한 것으로 장착하고 정적하중 시험을 실시하였다. 시험하중 조건은 설계 제한하중(Design Limit Load)과 설계 극한하중(Design Ultimate Load)까지 시험을 수행하며, 전방석과 후방석 패달에 동시하중을 작용하는 경우 중복하중계수(Dual Factor)까지 고려하였다. 이 시험의 요구하중은 MIL-A-8855(USAF)의 요구조건에 따라 수행하였으며, 방향타 콘트롤 시스템 시험 결과는 미 군사규격 요구조건을 만족하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1679-1688
• /
• 2008

Recently, the bogie frame weight of Light Rail Transit system has been reduced in order to save energy and materials. However, this light weighted vehicle structure is very important to verify the fatigue strength at the development stage. Bogie system consists of bogie frame, suspensions, wheel-sets, braking system and transmission system. Among these components, the bogie frame is most significant component subjected to the whole vehicle and passenger loads. In this study, the bogie frame for the New LRT power car is evaluated to the static and fatigue strength. And the evaluation method is used the LRT Performance Test Standards Specification throughout the FEM analysis and static load test. The static and fatigue test results for the LRT bogie frame of power car has been appeared very safety and stable for the design load conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.149-154
• /
• 2001

This paper presents the experimental study of the static stiffness for the BT Shank(7/24 Long Taper) and the HSK Tool Shank(1/10 Short taper). The static stiffness test was performed under different experimental conditions. The results obtained are as follows ; As known in the analysis results of the Load-Deflection diagram of the 7/24 Test tool shank, it is turned out that the diagram is a linear characteristics without regard to axial drawing force and according as the axial drawing force get to the 6kN, the static stiffness of the shank increase linearly. Thus the effective axial drawing force which maintains the static stiffness of the Main spindle taper of Machine Tool is larger than 6kN. It is found that the Load-Deflection diagram with 6kN of drawing force in the 1/10 Test tool shank is characterized by non-linear. But according as the axial drawing force is increasing by the 8kN, the diagram is characterized by linear. And increasing amount of deflection is about 60%. Therefore commendable axial drawing force is larger than 8kN. As a result, considering that the actual drawing force of the Machining Center is about 1300kgf and axial drawing force 12kN is equivalent amount as a 1220kgf, it is turned out that 1/10 Test tool shank superior to 7/24 Test tool shank in the static stiffness.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.487-496
• /
• 2022

Most of the pile's vertical static load tests in construction sites are the proof load tests, which is difficult to accurately estimate the ultimate bearing capacity and analyze the reliability of piles. Therefore, a reliability analysis method based on the proof load-settlement (Q-s) data is proposed in this study. In this proposed method, a simple ultimate limit state function based on the hyperbolic model is established, where the random variables of reliability analysis include the model factor of the ultimate bearing capacity and the fitting parameters of the hyperbolic model. The model factor M = R_uR / R_uP is calculated based on the available destructive Q-s data, where the real value of the ultimate bearing capacity (R_uR) is obtained by the complete destructive Q-s data; the predicted value of the ultimate bearing capacity (R_uP) is obtained by the proof Q-s data, a part of the available destructive Q-s data, that before the predetermined load determined by the pile test report. The results demonstrate that the proposed method can easy and effectively perform the reliability analysis based on the proof Q-s data.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.283-290
• /
• 2001

In this study, static Pile load tests and PDA for open-ended steel pipe pile($\phi$ = 609.6 mm, t = 14 mm) penetrated into the gravel layer(GP - GM) was accomplished and axial load distribution was measured. Based on the tests results, the ultimate bearing capacity and axial load bearing mode were examined. Also, the ultimate pile capacity was calculated by APIL $E^{PLUS}$./.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.92-99
• /
• 1996

Energy-efficient contrarotating propeller systems have been recently reviewed as one of alternative means in marine car-carrier applications. Contrarotating rotors preclude the usage of conventional plain journal bearings due to the lack of load carrying capacity. A new multi-recess hydrostatic contrarotating journal beating test facility has been designed and installed to test the static load carrying capacity. Measurements of flow rates and orbits have been investigated by testings on a overhung-type contrarotating rotor system which is supported by a hydrostatic journal bearing. Numerical results of static equilibria were compared with test results. Various contrarotating speed combinations, and supply pressure conditions were selected. The numerical predictions of orbit centers and flow rates are generally accurate.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권2호
• /
• pp.129-136
• /
• 2005

교량의 안전진단 과정에서 안전성 평가를 위해 전면교통통제 하에 차량재하시험이 일반적으로 실시된다. 교통통제의 단점을 개선시킨 최근에 제안된 의사정적재하시험에서는 계측된 시간이력 데이터 중 자유진동 부분을 퓨리에변환시켜 고유진동수를 구한다. 이렇게 구해진 고유진동수에는 분석기법에 따른 오차가 포함되며, 자유진동 데이터의 획득에도 다소 애로사항이 따른다. 이 연구에서는 Morlet wavelet를 모웨이블렛으로 하는 웨이블렛변환을 의사정적재하시험으로 계측한 데이터에 적용하여 구한 고유진동수와 감쇠율이 신뢰성을 가지며, 이 분석기법이 의사정적재하시험에 의한 차량재하시험의 자료 분석에 적용 가능하고 타당성이 있음을 보인다.